BS EN 1069-1:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Water slides Safety requirements and test methods
Hardcopy , PDF
24-06-2019
English
19-09-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Design
7 Safety requirements for water slides
8 Additional safety requirements for Types 1 to 10
9 Check and test runs
10 Designation and marking
Annex A (normative) - Splashdown areas
Annex B (normative) - Use of stainless steels for water slides
Annex C (normative) - Design loads, accesses and platforms
Bibliography
Pertains to all water slides installed in swimming pools of public use.
| Committee |
SW/136/8
|
| DevelopmentNote |
Supersedes 99/703120 DC. (07/2005) Supersedes 08/30181446 DC. (09/2010) Supersedes 15/30325361 DC. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
This European Standard is applicable to all water slides installed in swimming pools of public use. This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible. These requirements concern safety and the technical rules for design, calculation and testing.
| Standards | Relationship |
| NEN EN 1069-1 : 2017 | Identical |
| EN 1069-1:2017 | Identical |
| NBN EN 1069-1 : 2010 COR 2012 | Identical |
| I.S. EN 1069-1:2017 | Identical |
| DIN EN 1069-1:2015-09 (Draft) | Identical |
| UNI EN 1069-1 : 2010 | Identical |
| UNE-EN 1069-1:2011 | Identical |
| NS EN 1069-1 : 2017 | Identical |
| ONORM EN 1069-1 : 2017 | Identical |
| DIN EN 1069-1:2017-11 | Identical |
| SN EN 1069-1 : 2017 | Identical |
| NF EN 1069-1 : 2018 | Identical |
| UNE-EN 1069-1:2017 | Identical |
| BS PAS 65(2004) : 2004 | MANAGEMENT OF PUBLIC SWIMMING POOLS - GENERAL MANAGEMENT - CODE OF PRACTICE |
| HD 60364-7-702:2010 | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 1069-2:2017 | Water slides - Part 2: Instructions |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 13451-2:2015 | Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
| EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.