BS EN 10294-1:2005
Current
The latest, up-to-date edition.
Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels
Hardcopy , PDF
English
30-12-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Classification and designation
5.1 Classification
5.2 Designation
6 Information to be supplied by the purchaser
6.1 Mandatory information
6.2 Options
6.3 Example of an order
7 Manufacturing process
7.1 Steelmaking process
7.2 Deoxidation process
7.3 Tube manufacture and delivery conditions
8 Requirements
8.1 General
8.2 Chemical composition
8.3 Mechanical properties
8.4 Machinability
8.5 Appearance
8.6 Straightness
8.7 Preparation of ends
8.8 Dimensions, masses and tolerances
9 Inspection
9.1 Type of inspection
9.2 Inspection documents
9.3 Inspection and testing
10 Sampling
10.1 Frequency of tests
10.2 Preparation of samples and test pieces
11 Test methods
11.1 Tensile test
11.2 Impact test
11.3 Dimensional inspection
11.4 Visual examination
11.5 Retests, sorting and reprocessing
12 Marking
13 Temporary corrosion protection
Annex A (normative) Method for establishing o
machinability data
A.1 General
A.2 Tube sizes
A.3 Machining parameters
Bibliography
Describes the technical delivery conditions for seamless steel hollow bars intended for the manufacture of engineering components by machining.
| Committee |
ISE/110
|
| DevelopmentNote |
Supersedes 98/706827 DC. Partially supersedes BS 6258(1988). (01/2006) Reviewed and confirmed by BSI, September 2014. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 10294-1:2005 | Identical |
| NS EN 10294-1 : 1ED 2005 | Identical |
| NBN EN 10294-1 : 2006 | Identical |
| UNI EN 10294-1 : 2006 | Identical |
| NEN EN 10294-1 : 2005 | Identical |
| DIN EN 10294-1:2005-12 | Identical |
| SN EN 10294-1 : 2005 | Identical |
| EN 10294-1:2005 | Identical |
| UNE-EN 10294-1:2008 | Identical |
| NF EN 10294-1 : 2006 | Identical |
| ISO 3685:1993 | Tool-life testing with single-point turning tools |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.