BS EN 10154:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
Hardcopy , PDF
14-07-2004
English
27-05-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Manufacturing process
7 Requirements
7.1 Mechanical properties
7.2 Coatings
7.3 Surface quality
7.4 Surface treatment (surface protection)
7.5 Freedom from coil breaks
7.6 Stretcher strains (low carbon steels for cold forming)
7.7 Coating mass
7.8 Adhesion of coating
7.9 Surface condition
7.10 Tolerances on dimensions and shape
7.11 Suitability for further processing
8 Testing
8.1 General
8.2 Test units
8.3 Number of tests
8.4 Sampling
8.5 Test methods
8.6 Retests
9 Marking
10 Packing
11 Storage and transportation
12 Disputes
Annex A (normative) Reference method for determination of
the total coating mass
A.1 Purpose
A.2 Reagents
A.3 Procedure
A.4 Evaluation
Annex B (normative) Method for determination of the mass
of the Al-Fe-Si alloy layer
B.1 Purpose
B.2 Reagents
B.3 Procedure
B.4 Evaluation
Gives requirements for continuously hot-dip aluminium-silicon alloy coated flat products made of low carbon steels for cold forming or of structural steels in thickness < = 3,0 mm where the thickness is the final thickness of the delivered product after coating.
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes BS 6536(1985) & 00/704796 DC (06/2002)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 10154:2002 | Identical |
| EN 10154 : 2002 | Identical |
| NEN EN 10154 : 2002 | Identical |
| UNE-EN 10154:2002 | Identical |
| SN EN 10154 : 2002 | Identical |
| NS EN 10154 : 2ED 2002 | Identical |
| NF EN 10154 : 2002 | Identical |
| UNI EN 10154 : 1998 | Identical |
| NBN EN 10154 : 2002 | Identical |
| DIN EN 10154:2002-08 | Identical |
| ISO 10275:2007 | Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ENV 606 : DRAFT 1993 | BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EURONORM 12 : 1955 | FOLDING TEST OF SHEET STEELS AND STRIPS WITH A THICKNESS OF LESS THAN 3 MM |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 10113:2006 | Metallic materials Sheet and strip Determination of plastic strain ratio |
| EN 10020:2000 | Definition and classification of grades of steel |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.