BS EN 10137-1:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions
Hardcopy , PDF
17-11-2004
BS EN 10025-1:2004
BS EN 10025-6 : 2004
BS EN 10025-6:2004+A1:2009
English
15-04-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
2.1 General standards
2.2 Standards on dimensions and tolerances
2.3 Standards on testing
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification and designation
6.1 Classification
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery condition
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
7.7 Internal soundness
8 Inspection and testing
8.1 General
8.2 Sampling
8.3 Test units
8.4 Verification of chemical composition
8.5 Preparation of samples and test pieces
8.6 Test methods
8.7 Retests and resubmission for testing
8.8 Inspection documents
9 Marking
10 Disputes
11 Options
Annex
A (normative) Location of test pieces
B (informative) List of national standards which
correspond to EURONORMS referenced
Specifies requirements for plates and wide flats of high yield strength alloy special steels.
| Committee |
ISE/103
|
| DevelopmentNote |
DRAFT FOR COMMENT 93/306405 DC
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 10137-1 : 1995 | Identical |
| SN EN 10137-1 : 1996 | Identical |
| NEN EN 10137-1 : 1996 | Identical |
| UNE-EN 10137-1:1996 | Identical |
| UNI EN 10137-1 : 1997 | Identical |
| DIN EN 10137-1:1995-11 | Identical |
| NS EN 10137-1 : 1ED 1995 | Identical |
| NF EN 10137-1 : 1995 | Identical |
| EN 10137-1 : 1995 | Identical |
| I.S. EN 10137-1:1996 | Identical |
| BS 5975:1996 | Code of practice for falsework |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EURONORM 160 : 1985 | ULTRASONIC TESTING OF SHEET STEELS WITH THICKNESSES OF MORE THAN OR EQUAL TO 6mm (REFLECTION TEST) |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EURONORM 18 : 1979 | TAKING AND PREPARATION OF SAMPLES AND SAMPLE SECTIONS OF STEEL AND STEEL PRODUCTS |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EURONORM 103 : 1971 | MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EURONORM 168 : 1986 | IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS |
| EURONORM 91 : 1981 | HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.