BS EN 10113-1:1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hot-rolled products in weldable fine grain structural steels General delivery conditions
Hardcopy , PDF
17-11-2004
English
15-09-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification of qualities; designation
6.1 Classification of qualities
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery condition
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
7.7 Internal defects
8 Inspection and testing
8.1 General
8.2 Sampling
8.3 Test units
8.4 Verification of chemical composition
8.5 Mechanical tests
8.6 Test methods
8.7 Retests and resubmission for testing
8.8 Inspection documents
9 Marking for flat and long products
10 Complaints after delivery
11 Options
11.1 All products
11.2 Flat products
11.3 Long products
Annex A (normative) Location of samples and test pieces
(see EURONORM 18)
Annex B (informative) List of national standards which
correspond to EURONORMS referenced
Annex C (informative) List of corresponding former
designations
National annex NA (informative) Committees responsible
National annex NB (informative) Cross-references
| Committee |
ISE/103
|
| DevelopmentNote |
Together with BS 7613(1994), BS 7668(1994), BS EN 10029, BS EN 10113-2, BS EN 10113-3, BS EN 10155 and BS EN 10210-1 supersedes BS 4360(1990). Supersedes 90/42740 DC. (07/2005)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 4950-1:1995 | Similar to |
| NEN EN 10113-1 : 1993 | Identical |
| NS EN 10113-1 : 1ED 1993 | Identical |
| NF EN 10113-1 : 1993 | Identical |
| SN EN 10113-1 : 1994 | Identical |
| EN 10113-1 : 1993 | Identical |
| NBN EN 10113-1 : 1993 | Identical |
| UNI EN 10113-1 : 1994 | Identical |
| UNE-EN 10113-1:1994 | Identical |
| I.S. EN 10113-1:1993 | Identical |
| DIN EN 10113-1:1993-04 | Identical |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10113-3 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
| BS 2654:1989 | Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry |
| BS 4074:2000 | Specification for steel trench struts |
| 07/30016130 DC : 0 | BS 5974 - CODE OF PRACTICE FOR THE PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARILY INSTALLED SUSPENDED ACCESS EQUIPMENT |
| BS EN 10113-2:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS EN 10113-3:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels |
| BS 5975:1996 | Code of practice for falsework |
| BS 5400-6:1999 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 6: SPECIFICATION FOR MATERIALS AND WORKMANSHIP, STEEL |
| EURONORM 54 : 1980 | HOT-ROLLED SMALL U-BEAMS |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EURONORM 57 : 1978 | HOT-ROLLED ROUND-EDGE UNEQUAL ANGLE STEEL |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EURONORM 160 : 1985 | ULTRASONIC TESTING OF SHEET STEELS WITH THICKNESSES OF MORE THAN OR EQUAL TO 6mm (REFLECTION TEST) |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EURONORM 18 : 1979 | TAKING AND PREPARATION OF SAMPLES AND SAMPLE SECTIONS OF STEEL AND STEEL PRODUCTS |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EURONORM 24 : 1962 | NORMAL I-BEAMS, U-BEAMS; PERMISSIBLE DEVIATIONS |
| EURONORM 48 : 1984 | HOT-ROLLED STRIP STEEL; PERMISSIBLE DEVIATIONS IN DIMENSIONS AND FORM |
| EURONORM 53 : 1962 | HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
| EURONORM 103 : 1971 | MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS |
| EURONORM 60 : 1977 | HOT-ROLLED ROUND STEEL FOR GENERAL USE |
| EURONORM 56 : 1977 | HOT-ROLLED ROUND-EDGE EQUAL ANGLE STEEL |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EURONORM 19 : 1957 | IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EURONORM 65 : 1980 | HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS |
| EURONORM 67 : 1978 | HOT-ROLLED BULB FLATS |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EURONORM 61 : 1982 | HOT-ROLLED HEXAGON STEEL |
| EURONORM 58 : 1978 | HOT-ROLLED FLAT STEEL FOR GENERAL USE |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EURONORM 186 : 1987 | ULTRASONIC TESTING OF BROAD FLANGED BEAMS WITH PARALLEL FLANGES AND IPE BEAMS |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EURONORM 162 : 1981 | COLD ROLLED SECTIONS; TECHNICAL TERMS OF DELIVERY |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EURONORM 168 : 1986 | IRON AND STEEL PRODUCTS - INSPECTION DOCUMENTS, CONTENTS |
| EURONORM 59 : 1978 | HOT-ROLLED SQUARE STEEL FOR GENERAL USE |
| EURONORM 91 : 1981 | HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
| EURONORM 66 : 1967 | HOT-ROLLED HALF-ROUND BARS AND FLAT HALF ROUNDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.