BS EN 10107:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Grain-oriented electrical steel strip and sheet delivered in the fully processed state
Hardcopy , PDF
09-09-2022
English
30-04-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
ISE/108
|
| DevelopmentNote |
Supersedes BS 6404-8.7(1988) and 93/310711 DC. (07/2005) Supersedes 03/105795 DC. (03/2006) Supersedes 12/30259226 DC. (04/2014)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard defines the steel grades of grain-oriented electrical strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm and specifies in particular, general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedures. This European Standard applies to Goss textured grain-oriented electrical strip and sheet supplied in the final annealed condition in sheets or coils, and intended for the construction of magnetic circuits. The materials are grouped into two classes: a) conventional grain oriented material; b) high permeability grain oriented material. They correspond to Clause C.22 of IEC 60404-1:2000.
| Standards | Relationship |
| ONORM EN 10107 : 2014 | Identical |
| EN 10107:2014 | Identical |
| UNI EN 10107 : 2014 | Identical |
| NBN EN 10107 : 2014 | Identical |
| I.S. EN 10107:2014 | Identical |
| UNE-EN 10107:2014 | Identical |
| NF EN 10107 : 2014 | Identical |
| NEN EN 10107 : 2014 | Identical |
| DIN EN 10107:2014-07 | Identical |
| SN EN 10107 : 2014 | Identical |
| NS EN 10107 : 2014 | Identical |
| BS 6404-20:1996 | Magnetic materials Resistance and temperature classification of insulation coatings |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10280:2001+A1:2007 | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
| EN ISO 7799:2000 | Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 60404-2:1998/A1:2008 | MAGNETIC MATERIALS - PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET BY MEANS OF AN EPSTEIN FRAME |
| EN 10282:2001 | Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 60404-13 : 2007 | MAGNETIC MATERIALS - PART 13: METHODS OF MEASUREMENT OF DENSITY, RESISTIVITY AND STACKING FACTOR OF ELECTRICAL STEEL SHEET AND STRIP |
| EN 10251:1997 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10342:2005 | Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
| IEC 60404-1:2016 | Magnetic materials - Part 1: Classification |
| IEC 60404-2:1996+AMD1:2008 CSV | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame |
| EN 60404-11:2013 | Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip |
| IEC 60404-13:1995 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-3:1992+AMD1:2002+AMD2:2009 CSV | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.