BS 7403-4:1998
Current
The latest, up-to-date edition.
Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
Hardcopy , PDF
English
15-03-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Section 1: General
1.1 Scope
1.2 Normative references
1.3 Definitions
1.4 Graphical symbols
Section 2: Initial particle retention efficiency
2.1 Operational characteristics to be assessed
2.2 Test rig
2.3 Test liquids
2.4 Test contaminant
2.5 Test procedure
2.6 Test results and calculations
2.7 Report of test results for initial particle retention
efficiency
Section 3: Life and cumulative efficiency
3.1 Operational characteristics to be assessed
3.2 Test rig
3.3 Periodic checks on equipment
3.4 Test liquids
3.5 Test contaminant
3.6 Test procedure
3.7 Test results and calculations
3.8 Report of test results for life and cumulative
efficiency
Annexes
A Test parameters for initial particle retention efficiency
test
B Method for determining insolubles in test liquid samples
for initial particle retention efficiency
C Test parameters for life and cumulative efficiency test
D Method for determining insolubles in test liquid
samples for cumulative efficiency
E Details of equipment used in the mixing of test dust and
liquid slurry
F Bibliography
Defines tests for determination of the performance of full-flow lubricating oil filters for internal combustion engines.
| Committee |
MCE/14
|
| DevelopmentNote |
Also numbered as ISO 4548-4 Supersedes 95/713005 DC Together with BS 7403-1(1998), BS 7403-2(1998) and BS 7403-3(1998) supersedes BS 4836(1972) (07/2003) Reviewed and confirmed by BSI, September 2013. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO 4548 specifies tests for determining the performance of full-flow lubricating oil filters for internal combustion engines as follows.
Section 2: Initial particle retention efficiency. This gives the test procedures and parameters for the determination of the initial particle retention efficiency of lubricating oil filter elements under defined test conditions. By reporting the results in accordance with subclause 2.6, the probable retention efficiency for any particle size may be derived. The retention efficiency is determined by the gravimetric method.
Section 3: Life and cumulative efficiency. This gives the test procedures and parameters for the determination of element life and cumulative efficiency of lubricating oil filters. The cumulative efficiency is determined by the gravimetric method.
NOTE By agreement between filter manufacturer and purchaser, tests on large filters can be conducted on the basis of tests carried out on filters scaled-down in length. The relationship of the filter flow and test dust addition rate to the effective length of the filter medium should be the same in the scaled-down tests as in the full size filter. For the purposes of this part of ISO 4548, a filter having a test flow rate exceeding 100 l/min is considered large.
| ISO 11841-2:2000 | Road vehicles and internal combustion engines — Filter vocabulary — Part 2: Definitions of characteristics of filters and their components |
| SAE J 300 : 2015 | Engine Oil Viscosity Classification<br> |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 12103-2:1997 | Road vehicles — Test dust for filter evaluation — Part 2: Aluminium oxide test dust |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 11841-1:2000 | Road vehicles and internal combustion engines — Filter vocabulary — Part 1: Definitions of filters and filter components |
| ISO 4548-1:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 1: Differential pressure/flow characteristics |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.