BS 5750-2:1987
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Quality systems Specification for production and installation
Available format(s)
Hardcopy , PDF
Superseded date
15-07-1994
Superseded by
Language(s)
English
Published date
01-07-1988
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Committees responsible
Specification
0 Introduction
1 Scope and field of application
1.1 Scope
1.2 Field of application
2 References
3 Definitions
4 Quality system requirements
4.1 Management responsibility
4.2 Quality system
4.3 Contract review
4.4 Document control
4.5 Purchasing
4.6 Purchaser supplied product
4.7 Product identification and traceability
4.8 Process control
4.9 Inspection and testing
4.10 Inspection, measuring and test equipment
4.11 Inspection and test status
4.12 Control of nonconforming product
4.13 Corrective action
4.14 Handling, storage, packaging and delivery
4.15 Quality records
4.16 Internal quality audits
4.17 Training
4.18 Statistical techniques
Quality system requirements for use where a contract between two parties requires demonstration of a supplier\'s capability to control the processes that determine the acceptability of the product or service supplied.
| Committee |
QS/1
|
| DevelopmentNote |
BS DRAFT 93/408102 DC.
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NFX 50 132 : 1988 | Identical |
| ISO 9002:1994 | Identical |
| EN 29002 : 1994 | Identical |
| DEFSTAN 60-1(PT0)/1(1992) : 1992 | CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL |
| DEFSTAN 61-12(PT30)/1(1987) : 1987 | WIRES, CORDS, AND CABLES ELECTRICAL - METRIC UNITS - PART 30: WIRES AND CABLES, TAPED AND EXTRUDED PTFE/GLASS INSULATION, TYPES UNIFLEXEFGLAS AND UNIFLEXEFGLASMET 150 DEGREES SILVER PLATED CONDUCTORS |
| BS 5750-4:1990 | Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\' |
| DEFSTAN 61-3(PT1)/4(1990) : 1990 | BATTERIES, PRIMARY - GENERAL SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY, EXCLUDING LITHIUM |
| DEFSTAN 61-9(PT1)/4(1993) : INTERIM | GENERIC SPECIFICATION FOR BATTERIES, RECHARGEABLE, SECONDARY - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 61-3/5(1992) : INTERIM | GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY |
| ENA TS 66-3 : ISSUE 1 1989 | CARBON STEEL CASTINGS FOR STEAM TURBINES |
| ENA TS 66-2 : ISSUE 1 1989 | 2.25 CHROMIUM, MOLYBDENUM, STEEL CASTINGS FOR STEAM TURBINES |
| ENA TS 66-1 : ISSUE 2 1989 | 0.5 CHROMIUM, MOLYBDENUM, VANADIUM STEEL CASTINGS FOR STEAM TURBINES |
| DEFSTAN 61-12(PT9)/3(1990) : 1990 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, CABLES, RADIO FREQUENCY INCLUDING LIMITED FIRE HAZARD (LFH) VARIANTS |
| BS 4483:1985 | Specification for steel fabric for the reinforcement of concrete |
| BS 5892-3:1982 | Railway rolling stock material (metric) Specification for monobloc wheels for traction and trailing stock |
| BS 302-2:1987 | Stranded steel wire ropes Specification for ropes for general purposes |
| BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
| PD 3542:1991 | The role of standards in company quality management |
| BS 8202-2:1992 | Coatings for fire protection of building elements Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance |
| BS EN 1283:1996 | Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits |
| BS 3858:1992 | Specification for binding and identification sleeves for use on electric cables and wires |
| BS 302-5:1987 | Stranded steel wire ropes Specification for ropes for hauling purposes |
| BS 3059-1:1987 | Steel boiler and superheater tubes Specification for low tensile carbon steel tubes without specified elevated temperature properties |
| BS 6001-3:1993 | Sampling procedures for inspection by attributes Specification for skip-lot procedures |
| BS 7295-1:1990 | Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete Specification for coated bars |
| BS EN 2000:1992 | Quality assurance. EN aerospace products. Approval of the quality system of manufacturers |
| BS 65:1991 | Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings |
| BS 4A 100:2003 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 5892-4:1992 | Railway rolling stock materials Specification for forged and rolled tyres |
| BS 12:1989 | Specification for Portland cements |
| BS 302-6:1987 | Stranded steel wire ropes Specification for ropes for mine hoisting |
| BS 1894:1992 | Specification for design and manufacture of electric boilers of welded construction |
| BS 3604-1:1990 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties Specification for seamless and electric resistance welded tubes |
| BS 6730:1986 | Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water |
| BS 5882:1990 | Specification for a total quality assurance programme for nuclear installations |
| SAEITC TS137-4 | TS137 Technical Specification for Self Retaining \"Impedance Type\" Bolt - Imperial Tensile Strength 1275 MPa (185,000 lbf/in²) at Ambient Temperature 1065 MPa (154,000 lbf/in² at 425°C |
| BS 669-1:1989 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| BS 2838-2:1991 | Examination and general treatment couches Specification for variable height couches |
| BS 2494:1990 | Specification for elastomeric seals for joints in pipework and pipelines |
| BS 5892-3(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 3: SPECIFICATION FOR MONOBLOC WHEELS FOR TRACTION AND TRAILING STOCK |
| BS 4886:1988 | Specification for hospital bedsteads |
| BS 302-1:1987 | Stranded steel wire ropes Specification for general requirements |
| BS 4778-2:1991 | Quality vocabulary Quality concepts and related definitions |
| BS 2745-2:1993 | Washer-disinfectors for medical purposes Specification for human waste container washer-disinfectors |
| BS 5892-1(1992) : 1992 | RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK |
| BS 4881:1993 | Specification for polypropylene film cords, lines and twines |
| BS 5750-3:1987 | Quality systems Specification for final inspection and test |
| BS 2745-3:1993 | Washer-disinfectors for medical purposes Specification for washer-disinfectors except those used for processing human-waste containers and laundry |
| BS 47-1:1991 | Fishplates for railway rails Specification for rolled steel fishplates |
| BS EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control |
| BS 6910-1:1988 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6501-1:1991 | Flexible metallic hose assemblies Specification for corrugated hose assemblies |
| BS 3059-2:1990 | Steel boiler and superheater tubes Specification for carbon, alloy and austenitic stainless steel tubes with specified elevated temperature properties |
| BS 7669-3:1994 | Vehicle restraint systems Guide to the installation, inspection and repair of safety fences |
| BS 7158:1989 | Specification for plastics inspection chambers for drains |
| BS 302-3:1987 | Stranded steel wire ropes Specification for zinc coated ropes for ships |
| BS 7850-1:1992 | Total quality management Guide to management principles |
| BS 302-4:1987 | Stranded steel wire ropes Specification for ropes for lifts |
| BS EN 928:1996 | Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices |
| BS EN 724:1995 | Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices |
| BS 6744:1986 | Specification for austenitic stainless steel bars for the reinforcement of concrete |
| BS 5750-1:1987 | Quality systems Specification for design/development, production, installation and servicing |
| BS 2W 12:1989 | Specification for preformed zinc coated carbon steel wire rope (metric and inch series) |
| BS 0-3:1991 | A standard for standards Guide to drafting and presentation of British Standards |
| BS 1765-1:1990 | Hospital bedside lockers. Specification for general purpose bedside lockers for patients |
| BS 5750-5:1981 | Quality systems Guide to the use of BS 5750:Part 2 \'Specification for manufacture and installation\' |
| BS QC 001002:1991 | Rules of procedure of the IEC quality assessment system for electronic components (IECQ) |
| BS 6200-2.2:1993 | Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation Methods for ferroalloys and other alloying additives |
| BS 1503:1989 | Specification for steel forgings for pressure purposes |
| SAEITC TS135-2 | TS135 Technical Specification for All Metal Self-Locking Nuts (MJ Threads Reduced Hexagon - Deep Counterbored Tensile Strength:- 1100 MPa at Ambient Temperature |
| BS 6501-2:1991 | Flexible metallic hose assemblies Specification for strip wound hoses and hose assemblies |
| BS 5892-2:1992 | Railway rolling stock materials Specification for forged and rolled wheel centres |
| BS 9000-4:1991 | General requirements for a system for electronic components of assessed quality Specification of procedures for the approval of an organization |
| BS 3604-2:1991 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
| BS EN 30011-1:1993 | Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing |
| BS 3602-2:1991 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes |
| BS 65:1988 | Specification for vitrified clay pipes, fittings, joints and ducts |
| BS 5892-1:1983 | Railway rolling stock material (metric) Specification for axles for traction and trailing stock |
| BS 1723-3:1988 | Brazing Methods for non-destructive and destructive testing |
| BS 3843-3:1992 | Guide to terotechnology (the economic management of assets) Guide to the available techniques |
| BS 6200-2.1:1993 | Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation Methods for iron and steel |
| BS 2838-1:1988 | Examination and general treatment couches. Specification for fixed height couches |
| BS 4940-2:1994 | Technical information on construction products and services Guide to content and arrangement |
| BS 6910-2:1989 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| SAEITC TS134-4 | TS134 Technical Specification for Self-Retaining \"Impedance Type\" Bolts - Metric Tensile Strength: 1275 MPa at Ambient Temperature 1065 MPa at 425°c |
| BS 64:1992 | Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
| BS 3A 100:1991 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 6572:1985 | Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water |
| BS 7727:1994 | Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm<sup>2</sup> |
| BS 7336:1990 | Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels |
| BS 751:1992 | Specification for steel baseplates for flat bottom railway rails |
| BS 4466:1989 | Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete |
| BS 4772:1988 | Specification for ductile iron pipes and fittings |
| BS 3605-1:1991 | Austenitic stainless steel pipes and tubes for pressure purposes Specification for seamless tubes |
| BS 6143:1981 | Guide to the determination and use of quality related costs |
| BS 1506:1990 | Specification for carbon, low alloy and stainless steel bars and billets for bolting material to be used in pressure retaining applications |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.