BS 4A 116:2012
Current
The latest, up-to-date edition.
Steel pan head bolts (Unified threads), cadmium plated, for aircraft
Hardcopy , PDF
English
30-06-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 General requirements
4 Material and manufacture
5 Dimensions
6 Screw threads
7 Protective finish
8 Identification and marking
9 Inspection procedure
Annexes
Annex A (informative) - Table for conversion of inches
to approximate millimeter equivalents
Bibliography
Defines the materials, dimensions, finish and inspection requirements for steel pan head bolts with unified threads, cadmium plated for aircraft.
| Committee |
ACE/12
|
| DevelopmentNote |
Supersedes BS 3A116(1962) and 11/30252412 DC. (03/2012)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
ThisBritishStandardspecifiesthematerials,dimensions,finishandinspection requirementsforsteelpanheadboltswithUnifiedthreads,cadmiumplated,for aircraft.
NOTE 1 The values in British units are to be regarded as the standard. Table A.1 provides a ready means of calculating the approximate millimetre equivalents of the inch dimensions. More accurate conversions should be based on the tables in BS 350.
NOTE 2 In place of the customary, but incorrect, use of the ton as a unit of force, the unit called a ton force (abbreviation tonf) is used in this British Standard. It is the force which, when acting on a body of mass one ton, gives an acceleration equal to that of standard gravity.
| BS 2S96(1964) : LATEST | 2.5% NICKEL-CHROMIUM-MOLYBDENUM STEEL (55/65 TONF/SQ IN: LIMITING RULING SECTION 6 IN.) |
| BS 3S95(1967) : 1967 | SPECIFICATION FOR 1[1/2] PER CENT NICKEL-CHROMIUM-MOLYBDENUM STEEL - (880/1080 MPA: LIMITING RULING SECTION 150 MM) |
| BS 2S 114:1964 | Specification for aircraft material. Manganese-molybdenum steel (55/65 tonf/sq in: limiting ruling section 2½ inches) |
| BS 2S 116:1964 | Specification for aircraft material. \'40\' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section ¾ inch) (primarily intended for the manufacture of machined bolts) |
| BS 2S 149:1976 | Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS S 154:1976 | Specification. 2½% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm) |
| BS S148(1969) : 1969 | SPECIFICATION FOR LOW NICKEL-CHROMIUM STEEL (BAR FOR THE MANUFACTURE OF FORGED BOLTS ONLY) |
| BS 3S102(1969) : 1969 | SPECIFICATION FOR CARBON-MOLYBDENUM STEEL (BAR FOR THE MANUFACTURE OF FORGED BOLTS ONLY) |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS 3S105(1969) : 1969 | SPECIFICATION FOR CARBON STEEL - (BAR FOR THE MANUFACTURE OF FORGED BOLTS ONLY) |
| BS 350:2004 | Conversion factors for units |
| BS 2S 117:1964 | Specification for aircraft material. 1 per cent chromium steel (55/65 tonf/sq in: limiting ruling section 1⅛ inch) |
| BS 4A 100:2003 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS S 158:1977 | Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS 2S 147:1976 | Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts |
| BS 2S103(1964) : LATEST | LOW NICKEL CHROMIUM STEEL (WIRE ONLY FOR THE MANUFACTURE OF BOLTS) |
| DEFSTAN 03-19/4(2010) : 2010 | ELECTRO-DEPOSITION OF CADMIUM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.