BS 4936:1987
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
Available format(s)
Hardcopy , PDF
Superseded date
15-11-1999
Superseded by
BS EN ISO 4894-1:1999
BS ISO 4894-2 : AMD 10662
BS ISO 4894-1:1990
BS EN ISO 4894-2:1999
Language(s)
English
Published date
30-09-1987
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committees responsible
Method of specifying
1 Scope
2 Designation
3 Property requirements for a specification
4 Methods of test
Appendix
A Preparation of test specimens
Tables
1 Designatory properties
2 Minimum properties to be specified
3 Additional properties to be specified
Provides a designation system for the material based on updated test methods which have been almost all aligned with ISO and IEC methods.
| Committee |
PRI/82
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 4894-2:1995 | Similar to |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| BS 2782-7 Method 730A:1979 | Methods of testing plastics. Rheological properties Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution |
| BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus |
| ISO 1628-1:2009 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| ISO 4581:1994 | Plastics Styrene/acrylonitrile copolymers Determination of residual acrylonitrile monomer content Gas chromatography method |
| ISO 2556:1974 | Plastics Determination of the gas transmission rate of films and thin sheets under atmospheric pressure Manometric method |
| BS 2782-3 Method 359:1984 | Methods of testing plastics. Mechanical properties Determination of Charpy impact strength of rigid materials (Charpy impact flexural test) |
| BS 2782-2.240A&B(1982) : LATEST | METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF LOSS TANGENT AND PERMITTIVITY AT POWER AND AUDIO FREQUENCIES |
| ISO 75:1987 | Plastics and ebonite Determination of temperature of deflection under load |
| ISO 537:1989 | Plastics Testing with the torsion pendulum |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS 2782-1 Method 121A and 121B:1991 | Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress |
| BS 2782-9 Method 940B:1981 | Methods of testing plastics. Sampling and test specimen preparation Preparation of test specimens of amorphous thermoplastic moulding material with a defined level of shrinkage in the form of rectangular plates by injection moulding |
| BS 2782-2.230A(1982) : 1982 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF VOLUME RESISTIVITY |
| BS 2782-8.821A(1979) : 1979 AMD 13432 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE (MANOMETRIC METHOD) |
| IEC 60243:1967 | Recommended methods of test for electric strength of solid insulating materials at power frequencies |
| BS 2782-3 Method 350:1984 | Methods of testing plastics. Mechanical properties Determination of Izod impact strength of rigid materials |
| BS 2782-9 Method 940A:1981 | Methods of testing plastics. Sampling and test specimen preparation Preparation of test specimens of amorphous thermoplastic moulding material with a defined level of shrinkage in the form of parallelepipedic bars by compression moulding and injection moulding |
| ISO 4894-1:1997 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
| ISO 489:1999 | Plastics Determination of refractive index |
| BS 2782-8.833A.C(1993) : 1993 AMD 9927 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) BY THE CONSTANT TENSILE STRESS METHOD |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| BS 2782-5:Method 531A:1992 | Methods of testing plastics. Optical and colour properties, weathering Determination of refractive index of transparent plastics |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ISO 2561:2012 | Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography |
| BS 2782-7 Method 720A:1979 | Methods of testing plastics. Rheological properties Determination of melt flow rate of thermoplastics |
| BS 2782-2.220&221(1983) : LATEST | METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF ELECTRICAL STRENGTH: RAPIDLY APPLIED VOLTAGE METHOD AND STEP-BY-STEP METHOD |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| BS 2782-3 Method 345A:1979 | Methods of testing plastics. Mechanical properties Determination of compressive properties by deformation at constant rate |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| BS 2782-8 Method 820A:1992 | Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method) |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 2557-2:1986 | Plastics Amorphous thermoplastics Preparation of test specimens with a specified reversion Part 2: Plates |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| BS 2782-2.231A(1982) : LATEST | METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF SURFACE RESISTIVITY |
| ISO 2557-1:1989 | Plastics Amorphous thermoplastics Preparation of test specimens with a specified maximum reversion Part 1: Bars |
| BS 2782-3 Method 335A:1978 | Methods of testing plastics. Mechanical properties Determination of flexural properties of rigid plastics |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| BS 2782-1 Methods 120A to 120E:1976 | Methods of testing plastics. Thermal properties Determination of the Vicat softening temperature of thermoplastics |
| BS 2782-9 Method 931A:1988 | Methods of testing plastics. Sampling and test specimen preparation Preparation and use of multipurpose test specimens |
| ISO 178:2010 | Plastics Determination of flexural properties |
| BS 2782-4:Method 453A:1978 | Methods of testing plastics. Chemical properties Determination of residual styrene monomer in polystyrene by gas chromatography |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 4600:1992 | Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method |
| BS 2782-3 Method 365C:1986 | Methods of testing plastics. Mechanical properties Determination of Rockwell hardness |
| BS 2782-8 Method 830A:1986 | Methods of testing plastics. Other properties Determination of the effects of liquid chemicals, including water |
| BS 2782-6 Methods 620A to 620D:1980 | Methods of testing plastics. Dimensional properties Determination of density of solid plastics excluding cellular plastics (immersion method). Determination of density of solid plastics excluding cellular plastics (pyknometer method). Determination of density of solid plastics excluding cellular plastics (sink-float method). Determination of density of solid plastics excluding cellular plastics (density gradient column method) |
| BS 2782-4.430A.D(1983) : 1983 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF WATER AND BOILING WATER ABSORPTION AT 23 DEGREES C. DETERMINATION OF WATER AND BOILING WATER WITH ALLOWANCE OF WATER-SOLUBLE MATTER |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.