BS 3900-A3(2004) : 2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING
Hardcopy , PDF
31-08-2016
English
01-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Steel panels
4 Tinplate panels
5 Zinc- and zinc-alloy-coated panels
6 Aluminium panels
7 Glass panels
8 Hardboard
9 Paper-faced plasterboard
10 Fibre-reinforced panels
Annex A (informative) General guidelines on preparation of
steel panels by blast-cleaning
Annex B (informative) Characterization of zinc and zinc-alloy
coatings
Bibliography
Specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are to be used in general methods of test for varnishes, paints and related products. Specifies the following types of standard panels: tinplate panels (prepared by abrasion and solvent cleaning); steel panels (prepared by abrasion, solvent cleaning and blast cleaning); glass panels (prepared by detergent cleaning and solvent cleaning); aluminium panels (prepared by abrasion, solvent cleaning and acid chromating); hardboard panels; asbestos cement panels; and paper faced plasterboard panels.
| Committee |
STI/10
|
| DevelopmentNote |
Supersedes BS 3900-A3(1997). (12/2004) Supersedes 01/122621 DC. (02/2005)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 1514:2016 | Identical |
| EN ISO 1514:2016 | Identical |
| ISO 11124-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 4: Low-carbon cast-steel shot |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition |
| ISO 11126-9:1999 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: Staurolite |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8504-1:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles |
| ISO 11124-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit |
| ISO 11126-5:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 5: Nickel refinery slag |
| ISO 2695:1976 | Fibre building boards Hard and medium boards for general purposes Quality specifications Appearance, shape and dimensional tolerances |
| ISO 11126-8:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 11126-6:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 6: Iron furnace slag |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
| ISO 11124-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification |
| ISO 11126-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification |
| ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 10546:1993 | Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
| ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
| ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 2696:1976 | Fibre building boards Hard and medium boards for general purposes Quality specifications Water absorption and swelling in thickness |
| ISO 8336:2017 | Fibre-cement flat sheets — Product specification and test methods |
| ISO 11949:2016 | Cold-reduced tinmill products Electrolytic tinplate |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
| ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
| ISO 14788:2011 | Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.