BS 3604-1:1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties Specification for seamless and electric resistance welded tubes
Hardcopy , PDF
30-11-2014
English
31-05-1990
Foreword
Committees responsible
Specification
1 Scope
2 Information to be supplied by the purchaser and
options to be documented
3 Designation
4 Manufacture of the steel
5 Manufacture of the product
6 Chemical analysis
7 Heat treatment
8 Mechanical properties
9 Visual inspection and appearance
10 Tolerances
11 Tests
12 Number, selection and preparation of samples and
test pieces
13 Test methods
14 Retests
15 Test certificate
16 Protective clothing
17 Marking
Appendices
A Designations of steel tubes in BS 3604 : Part 1 and
the nearest equivalent designations in ISO 2604
Parts II and III
B Dimensional limits of tubes in relation to the
method of manufacture
C Estimated average stress-rupture values
D Procedure for the verification of elevated
temperature values
E Eddy current testing of tubes for verification of
leak tightness
F Ultrasonic testing of tubes for detection of
longitudinal imperfections
Tables
1 Method of manufacture of tube and reference
2 Steel type and type number
3 Chemical composition, mechanical properties at room
temperature, and heat treatment
4 Permitted deviations of the product analysis from
the specified ladle analysis
5 Minimum 0.2 % proof stress (Rp0.2) values at
elevated temperatures
6 Tests for test category 1 and test category 2
7 Designations of steel tubes in BS 3604 : Part 1 and
the nearest equivalent steel numbers in ISO 2604
Parts II and III
8 Dimensional limits of tubes in relation to the
method of manufacture for tubes supplied to outside
diameters and thicknesses
9 Estimated average stress rupture values
10 Parameters for lower confidence lines: steel types
620-440 : 1 % chromium 0.5 % molybdenum (normalized
and tempered), and 621 : 1.25 % chromium 0.5 %
molybdenum (normalized and tempered)
11 Parameters for lower confidence lines: steel type
660 : 0.5 % chromium 0.5 % molybdenum 0.25 %
vanadium (normalized and tempered)
12 Parameters for lower confidence lines: steel type
622 : 2.25 % chromium 1 % molybdenum (normalized
and tempered
13 Parameters for lower confidence lines: steel type
625 : 5 % chromium 0.5 % molybdenum (annealed)
14 Parameters for lower confidence lines: steel type
629-470 : 9 % chromium 1 % molybdenum (annealed)
15 Parameters for lower confidence lines: steel type
629-590 : 9 % chromium 1 % molybdenum (normalized
and tempered)
16 Parameters for lower confidence lines: steel type
762 : 12 % chromium 1 % molybdenum
17 Dimensions of reference holes for method A
18 Notch dimensions for method B
19 Reference notch dimensions and tolerances
Figures
1 Example of lower confidence lines for steel type 622
Requirements for plain end tubes. Room temperature properties and elevated temperature proof stress properties are specified.
Committee |
ISE/107
|
DevelopmentNote |
BS DRAFT 93/313858 DC
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 2604-3:1975 | Similar to |
ISO 2604-2:1975 | Similar to |
BS DD215(1993) : 1993 | SPECIFICATION FOR VALIDATION OF METAL TEMPERATURE IN THE HEAT TREATMENT OF STEELS FOR PRESSURE PURPOSES |
PD 6525-1:1990 | Elevated temperature properties for steels for pressure purposes. Stress rupture properties |
DEFSTAN 02-864/2(2012) : 2012 | CARBON, CARBON-MANGANESE AND CHROMIUM-MOLYBDENUM STEEL PIPES AND TUBES FOR PRESSURE PURPOSES |
PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2009) : 2009 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
BS 1113:1992 | Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers) |
BS 6891:1998 | Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas) |
BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 806:1993 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
BS PD5500(2012) : 2012 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
DEFSTAN 02-864/1(2000) : 2000 | CARBON, CARBON-MANGANESE, AND CHROMIUM-MOLYBDENUM STEEL PIPES AND TUBES FOR PRESSURE PURPOSES |
BS 3605-1:1991 | Austenitic stainless steel pipes and tubes for pressure purposes Specification for seamless tubes |
BS 5500:1991 | Specification for unfired fusion welded pressure vessels |
BS 1821:1982 | Specification for class I oxy-acetylene welding of ferritic steel pipework for carrying fluids |
BS 3604-2:1991 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
BS 2745-1:1993 | Washer-disinfectors for medical purposes Specification for general requirements |
BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
BS 3602-2:1991 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes |
BS 3602-2:1978 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevatedtemperature properties Submerged arc welded tubes |
BS 1600-2:1970 | Specification for dimensions of steel pipe for the petroleum industry Metric units |
BS 3894-1:1965 | Method for converting elongation values for steel Carbon and low alloy steels |
BS 5750-2:1987 | Quality systems Specification for production and installation |
BS 3688-1:1963 | Methods for mechanical testing of metals at elevated temperatures. Tensile testing |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
BS 3602-1:1987 | Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for seamless and electric resistance welded including induction welded tubes |
ISO 702-3:2007 | Machine tools Connecting dimensions of spindle noses and work holding chucks Part 3: Bayonet type |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.