BS 2789:1985
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Specification for spheroidal graphite or nodular graphite cast iron
Hardcopy , PDF
15-10-1997
English
28-06-1985
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committees responsible
Specification
0. Introduction
1. Scope
2. Designation
3. Information to be supplied by the purchaser
4. Mechanical properties
5. Number of tests
6. Provision and preparation of test samples
7. Test pieces
8. Mechanical tests
9. Retests
10. Test certificate
Appendix
A. Comparison between grades in this edition and the
previous two editions based on minimum tensile
strength
Tables
1. Mechanical properties and supplementary information
2. Impact test values for 400/18, 350/22 and associated
grades
3. Dimensions of cast-on test sample and test piece
machined from cast-on test sample
Figures
1. 'U' shaped test samples
2. 'Y' shaped test samples
3. Separately cast 'knock-off' type test samples
4. Type V: core assembly method for producing a 25 mm
'in-mould' sample of the 'U' shaped test sample
type IIB
5. Tensile test piece
6. Standard test piece for Charpy V-notch impact test
Specifies the material properties in mechanical property terms of nine grades of spheroidal or nodular graphite cast iron used in the manufacture of castings.
| Committee |
ISE/111
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 1083:2004 | Similar to |
| BS 1560-3.2:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for cast iron flanges |
| BS 1978:1965 | Specification for bit braces |
| DEFSTAN 02-327/2(2001) : INTERIM | REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
| BS 7775:1995 | Specification for penstocks |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS 5041-1:1987 | Fire hydrant systems equipment Specification for landing valves for wet risers |
| BS 4878:1973 | Specification for large (vee-throated) haulage rope pulleys for mines and quarries |
| BS 5041-3:1975 | Fire hydrant systems equipment Specification for inlet breechings for dry riser inlets |
| BS 5400-9.1(1983) : 1983 | STEEL, CONCRETE AND COMPOSITE BRIDGES - PART 9: BRIDGE BEARINGS - SECTION 9.1: CODE OF PRACTICE FOR DESIGN OF BRIDGE BEARINGS |
| BS 779:1989 | Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above) |
| BS 5885-1:1988 | Automatic gas burners Specification for burners with input rating 60 kW and above |
| BS 6579-1:1988 | Safety fences and barriers for highways Specification for components for tensioned corrugated beam safety fence on Z posts |
| BS 6349-4:1994 | Maritime structures Code of practice for design of fendering and mooring systems |
| BS 5154:1991 | Specification for copper alloy globe, globe stop and check, check and gate valves |
| BS 5041-2:1987 | Fire hydrant systems equipment Specification for landing valves for dry risers |
| BS 5155:1984 | Specification for butterfly valves |
| BS 3288-1:1997 | Insulator and conductor fittings for overhead power lines Performance and general requirements |
| BS 806:1993 | Specification for design and construction of ferrous piping installations for and in connection with land boilers |
| BS 1414:1975 | Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| BS 853-2:1996 | Specification for vessels for use in heating systems Tubular heat exchangers and storage vessels for building and industrial services |
| BS 1101:1977 | Specification for pressure containers for paint and other similar substances |
| BS 5400-9.2:1983 | STEEL, CONCRETE AND COMPOSITE BRIDGES - BRIDGE BEARINGS - SPECIFICATION FOR MATERIALS, MANUFACTURE AND INSTALLATION OF BRIDGE BEARINGS |
| BS 10:1962 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 1873:1975 | Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 10:2009 | Specification for flanges and bolting for pipes, valves and fittings |
| BS 545:1982 | Specification for bevel gears (machine cut) |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| BS 466:1984 | Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use |
| BS 7333:1990 | Specification for slewing jib cranes |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS 853(1990) : 1990 AMD 8979 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| BS 853-1(1996) : 1996 | SPECIFICATION FOR VESSELS FOR USE IN HEATING SYSTEMS - CALORIFIERS AND STORAGE VESSELS FOR CENTRAL HEATING AND HOT WATER SUPPLY |
| BS 3351:1971 | Specification for piping systems for petroleum refineries and petrochemical plants |
| BS 5834-3:1985 | Surface boxes, guards and underground chambers for gas and waterworks purposes Specification for large surface boxes |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| BS 6200-2.1:1993 | Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation Methods for iron and steel |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.