ASTM G 4 : 2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Conducting Corrosion Tests in Field Applications
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-10-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.02, 2015 Defines procedures for conducting corrosion tests in plant equipment or systems under operating conditions to evaluate the corrosion resistance of engineering materials.
| Committee |
G 01
|
| DevelopmentNote |
Supersedes ASTM A 224. (01/2002)
|
| DocumentType |
Guide
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This guide covers procedures for conducting corrosion tests in plant equipment or systems under operating conditions to evaluate the corrosion resistance of engineering materials. It does not cover electrochemical methods for determining corrosion rates.
1.1.1 While intended primarily for immersion tests, general guidelines provided can be applicable for exposure of test specimens in plant atmospheres, provided that placement and orientation of the test specimens is non-restrictive to air circulation.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See also 10.4.2.
| ASTM G 96 : 1990 : R1996 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| NACE 11106 : 2006 | MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS |
| ASTM G 199:2009 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 71 : 1981 | GUIDE FOR CONDUCTING AND EVALUATING GALVANIC CORROSION TESTS IN ELECTROLYTES |
| ASTM G 162 : 1999 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| BS EN ISO 15001:2011 | Anaesthetic and respiratory equipment. Compatibility with oxygen |
| AWS A5.4 : 92(R2000) | STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR |
| NACE RP 02 81 : 2004 | METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
| NACE RP 03 00 : 2003 | PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| NACE RP0300/ISO 16784-1 : 2006 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| BS ISO 15001 : 2003 AMD 15145 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| ASTM G 162 : 1999 : R2010 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 71 : 1981 : R1998 : EDT 1 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| NACE SP 03 00 : 2016 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| NACE RP 04 97 : 2004 | FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS |
| ASTM C 1187 : 2015 : REDLINE | Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
| W48-18 | Filler metals and allied materials for metal arc welding |
| I.S. EN ISO 15001:2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010) |
| UNI EN ISO 15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| ASTM G 71 : 1981 : R2009 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 71 : 1981 : R2003 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| BS EN ISO 16784-1:2008 | Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems |
| NACE RP 07 75 : 2005 | PREPARATION, INSTALLATION, ANALYSIS, AND INTERPRETATION OF CORROSION COUPONS IN OILFIELD OPERATIONS |
| ASTM G 199 : 2009 : R2014 | Standard Guide for Electrochemical Noise Measurement |
| I.S. EN 16603-35-10:2014 | SPACE ENGINEERING - COMPATIBILITY TESTING FOR LIQUID PROPULSION COMPONENTS, SUBSYSTEMS AND SYSTEMS |
| DIN EN ISO 16784-1:2008-07 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| BS EN 16603-35-10:2014 | Space engineering. Compatibility testing for liquid propulsion components, subsystems and systems |
| ASTM G 96 : 1990 : R2001 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 96 : 1990 : R2013 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 217 : 2016 | Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| ASTM D 7665 : 2017 : REDLINE | Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
| NACE RP 01 89 : 2002 | ON-LINE MONITORING OF COOLING WATERS |
| ASTM G 78 : 2015 : REDLINE | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| 03/118691 DC : DRAFT JAN 2004 | ISO 16784-1 - INDUSTRIAL COOLING WATER SYSTEMS - TESTING AND PERFORMANCE - PILOT SCALE EVALUATION OF CORROSION AND SCALE CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| NACE TM 04 99 : 2009 | IMMERSION CORROSION TESTING OF CERAMIC MATERIALS |
| UNI EN ISO 16784-1 : 2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| CSA Z15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| CAN/CSA-Z15001:12 (R2017) | Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations) |
| NACE 24238 : 2009 | MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS |
| ASTM G 96 : 1990 : R2008 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ISO 16784-1:2006 | Corrosion of metals and alloys Corrosion and fouling in industrial cooling water systems Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| EN 16603-35-10:2014 | Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems |
| EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| EN ISO 16784-1:2008 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2006) |
| ASTM G 71 : 1981 : R2014 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM D 5372 : 2017 : REDLINE | Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
| BS ISO 16784-1 : 2006 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| ASTM G 162 : 1999 : R2004 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM F 3268 : 2018 | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| I.S. EN ISO 16784-1:2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 1: GUIDELINES FOR CONDUCTING PILOT-SCALE EVALUATION OF CORROSION AND FOULING CONTROL ADDITIVES FOR OPEN RECIRCULATING COOLING WATER SYSTEMS |
| UNE-EN ISO 15001:2012 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| NACE RP 04 97 : 2004 | FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS |
| ASTM G 78 : 2015 : REDLINE | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ASTM G 41 : 1990 | PRACTICE FOR DETERMINING CRACKING SUSCEPTIBILITY OF METALS EXPOSED UNDER STRESS TO A HOT SALT ENVIRONMENT |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.