• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM F 963 : 2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Consumer Safety Specification for Toy Safety

Available format(s)

Hardcopy , PDF

Superseded date

11-04-2019

Language(s)

English

Published date

31-12-2010

£89.84
Excluding VAT

1.1 This specification relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse

Committee
F 15
DocumentType
Standard
Pages
50
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1 This specification relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse. It does not purport to cover every conceivable hazard of a particular toy. This specification does not cover product performance or quality, except as related to safety. Except for the labeling requirements pointing out the functional hazards and age range for which the toy is intended, this specification has no requirements for those aspects of a toy that present an inherent and recognized hazard as part of the function of the toy. Such an example is a sharp point necessary for the function of a needle. The needle is an inherent hazard that is well understood by the purchaser of a toy sewing kit, and this hazard is communicated to the user as part of the normal educational process.

1.2 On the other hand, while a riding toy has inherent hazards associated with its use (for example, falling off onto the sidewalk), the possible hazards associated with its construction (sharp edges, exposed mechanisms, etc.) will be minimized by the application of this specification.

1.3 This specification covers requirements and contains test methods for toys intended for use by children under 14 years of age. Different age limits for various requirements will be found in this specification. These limits reflect the nature of the hazards and expected mental or physical ability, or both, of a child to cope with the hazards.

1.4 Articles not covered by this specification are as follows:

Bicycles

Tricycles

Sling shots and sharp-pointed darts

Playground equipment

Non-powder guns

Kites

Hobby and craft items in which the finished item is notprimarily of play value

Model kits in which the finished item is not primarily of play value

Crayons, paints, chalks, and other similar art materials in which the material itself or the finished item is notprimarily of play value, except that all art materials, whether or not a component of a toy, must comply toLHAMA, in accordance with 4.30.1-4.30.3.

Sporting goods, camping goods, athletic equipment, mu-sical instruments, and furniture; however, toys that are their counterparts are covered. (It is recognized that there is often a fine line between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the producer or distributor, as well asnormal use and reasonably foreseeable abuse, deter-mines whether the item is a toy counterpart.)

Powered models of aircraft, rockets, boats, and landvehicles; however, toys that are their counterparts are covered.

1.5 General guidelines for age labeling toys and toy packaging are contained in Annex A1.

1.6 Information regarding packaging and shipping is contained in Annex A2.

1.7 This consumer safety specification includes the following sections:

TitleSection
Scope1
Referenced Documents2
Terminology3
Safety Requirements4
Material Quality4.1
Flammability4.2
Toxicology4.3
Electrical/Thermal Energy4.4
Sound Producing Toys4.5
Small Objects4.6
Accessible Edges4.7
Projections4.8
Accessible Points4.9
Wires or Rods4.10
Nails and Fasteners4.11
Packaging Film4.12
Folding Mechanisms and Hinges4.13
Cords and Elastics in Toys4.14
Stability and Over-Load Requirements4.15
Confined Spaces4.16
Wheels, Tires, and Axles4.17
Holes, Clearance, and Accessibility of Mechanisms4.18
Simulated Protective Devices4.19
Pacifiers4.20
Projectile Toys4.21
Teethers and Teething Toys4.22
Rattles4.23
Squeeze Toys4.24
Battery-Operated Toys4.25
Toys Intended to be Attached to a Crib
or Playpen4.26
Toy Chests4.27
Stuffed and Beanbag-Type Toys4.28
Stroller and Carriage Toys4.29
Art Materials4.30
Toy Gun Marking4.31
Balloons4.32
Certain Toys with Spherical Ends4.33
Marbles4.34
Balls4.35
Pompoms4.36
Hemispheric-Shaped Objects4.37
Yo Yo Elastic Tether Toys4.38
Magnets4.39
Safety Labeling Requirements5
Instructional Literature6
Producer's Markings7
Test Methods8
General8.1
Testing for Hazardous Substance Content8.2
Method to Dissolve Soluble Matter8.3
Tests for Cleanliness and Preservative Effectiveness8.4
Normal Use Testing8.5
Abuse Testing8.6
Impact Tests8.7
Torque Tests for Removal of Components8.8
Tension Test for Removal of Components8.9
Compression Test8.10
Tests for Tire Removal and Snap-in Wheel and
Axle Assembly Removal8.11
Flexure Test8.12
Test for Mouth-Actuated Toys8.13
Tests for Toy Chest Lids and Closures8.14
Projectiles8.15
Test for Stability of Ride-On Toys8.16
Stalled Motor Test for Battery-Operated Toys8.18
Tests for Battery-Powered Ride-On Toys8.19
Tests for Toys which Produce Noise8.20
Dynamic Strength Test for Wheeled Ride-On Toys8.21
Packaging Film Thickness8.22
Test for Loops and Cords8.23
Yo Yo Elastic Tether Toy Test Methods8.24
Magnetic Flux Index8.25
Identification9
Age Grading GuidelinesAnnex A1
Packaging and ShippingAnnex A2
Design Guidelines for Toys Attached to Cribs
or PlaypensAnnex A3
Flammability Testing Procedure for ToysAnnex A4
RationaleAnnex A5

1.8 The values stated first are to be regarded as the standard. The values given in parentheses are for information only.

The following precautionary statement pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM F 2640 : 2018 Standard Consumer Safety Specification for Booster Seats
ASTM F 3317 : 2020 Standard Consumer Safety Specification for Infant Floor Seats
ASTM F 3188 : 2016 Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials
ASTM F 2951 : 2019 Standard Consumer Safety Specification for Baby Monitors
ASTM F 2050 : 2019 Standard Consumer Safety Specification for Hand-Held Infant Carriers
ASTM F 3343 : 2020 Standard Consumer Safety Specification for Infant Bathers
ASTM D 5517 : 2014 Standard Test Method for Determining Extractability of Metals from Art Materials
ASTM F 2194 : 2016 : EDT 1 Standard Consumer Safety Specification for Bassinets and Cradles
ASTM F 2088 : 2020 Standard Consumer Safety Specification for Infant and Cradle Swings
ASTM F 2388 : 2018 Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
ASTM F 1169 : 2019 Standard Consumer Safety Specification for Full-Size Baby Cribs
ASTM F 2549 : 2014 : REV A Standard Consumer Safety Specification for Frame Child Carriers
ASTM F 2642 : 2008 : R2015 Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)
ASTM F 977 : 2018 Standard Consumer Safety Specification for Infant Walkers
ASTM F 2075 : 2020 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
ASTM F 2666 : 2016 Standard Specification for Aboveground Portable Pools for Residential Use
ASTM F 3118 : 2017 : REV A Standard Consumer Safety Specification for Infant Inclined Sleep Products (Withdrawn 2022)
ASTM F 3101 : 2015 Standard Specification for Unsupervised Public Use Outdoor Fitness Equipment
ASTM F 3084 : 2020 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
ASTM F 3012 : 2014 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM F 1967 : 2019 Standard Consumer Safety Specification for Infant Bath Seats
ASTM F 2641 : 2008 : R2015 Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
ASTM F 2670 : 2018 Standard Consumer Safety Specification for Infant Bath Tubs
ASTM F 2373 : 2011 : R2017 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
ASTM F 2999 : 2019 Standard Consumer Safety Specification for Adult Jewelry
ASTM F 1004 : 2019 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
ASTM F 2012 : 2018 : EDT 1 Standard Consumer Safety Performance Specification for Stationary Activity Centers
ASTM F 2907 : 2019 Standard Consumer Safety Specification for Sling Carriers
ASTM F 1487 : 2017 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
ASTM F 404 : 2020 Standard Consumer Safety Specification for High Chairs
ASTM F 2573 : 2006 : R2018 Standard Specification for Low Velocity Resilient Material Projectile
ASTM F 833 : 2019 Standard Consumer Safety Performance Specification for Carriages and Strollers
ASTM F 2167 : 2019 Standard Consumer Safety Specification for Infant Bouncer Seats
ASTM F 406 : 2019 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
ASTM F 2598 : 2009 : R2017 : EDT 1 Standard Consumer Safety Specification for Clothing Storage Chests
ASTM F 2923 : 2020 Standard Specification for Consumer Product Safety for Children’s Jewelry
ASTM F 2236 : 2016 : REV A Standard Consumer Safety Specification for Soft Infant and Toddler Carriers

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.