ASTM F 67 : 2013 : R2017
Current
Current
The latest, up-to-date edition.
Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strips, sheets, plates, bars, billets, forgings, and wires used for the manufacture of surgical implants.
| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strip, sheet, plate, bar, billet, forging, and wire used for the manufacture of surgical implants.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1447 : 2001 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1409 : 2013 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 1941 : 2010 : R2016 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 381 : 2013 : R2019 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM E 1447 : 2022 | Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 1941 : 2010 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 348 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM E 1409 : 2004 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 1447 : 1992 : R1996 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 1409 : 2013 : R2021 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 1409 : 2005 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ASTM E 1447 : 2004 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1409 : 2013 : REDLINE | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| SAE AMS 2631 : 2011 | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
| ASTM E 1447 : 2009 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM E 2626 : 2008 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals |
| SAE AMS 2249 : 2013 | CHEMICAL CHECK ANALYSIS LIMITS, TITANIUM AND TITANIUM ALLOYS |
| ASTM E 1941 : 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
| ASTM F 981 : 2004 : R2016 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone |
| ASTM B 265 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM E 2371 : 2004 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013) |
| ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ISO 5832-2:1999 | Implants for surgery Metallic materials Part 2: Unalloyed titanium |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM E 290 : 2022 | Standard Test Methods for Bend Testing of Material for Ductility |
| ASTM B 381 : 2021 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM E 2626 : 2008 : EDT 1 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017) |
| ASTM B 381 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM E 1409 : 1997 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 1409 : 2008 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
| SAE AMS 2380 : 2017 | APPROVAL AND CONTROL OF PREMIUM-QUALITY TITANIUM ALLOYS |
| ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
| ASTM E 1941 : 1998 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
| ASTM E 2371 : 2021 : REV A | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| ASTM E 290 : 2014 | Standard Test Methods for Bend Testing of Material for Ductility |
| ASTM E 1447 : 2005 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM F 981 : 2023 | Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 2371 : 2021 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.