ASTM F 3000/F3000M : 2013 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
Hardcopy , PDF
21-11-2022
English
29-03-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.06, 2018 Defines polymer privacy insert slats designed for insertion into chain link fabric after the chain link fence installation and privacy chain fabric having slats pre-inserted into chain link mesh during the chain link weaving process.
| Committee |
F 14
|
| DocumentType |
Standard
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2018
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers polymer privacy insert slats designed for insertion into chain link fabric after the chain link fence installation and privacy chain fabric having slats pre-inserted into chain link mesh during the chain link weaving process.
1.1.1Type P-V consists of polyethylene privacy insert slats hand inserted vertically into standard mesh chain link fabric after the fence installation.
1.1.2Type P-D consists of polyethylene privacy insert slats hand woven diagonally into standard mesh chain link fabric after the fence installation.
1.1.3Type F-VDH consists of modified fiberglass privacy insert slats hand woven, vertically, diagonally or horizontally into standard mesh chain link fabric after the fence installation.
1.2Type PI-V consists of privacy chain link fabric containing vertical high density polyethylene privacy slats pre-inserted into the chain link mesh during the chain link weaving process. Style 1a: Wider, 2 3/8in. [60.3 mm] to 3 in. [76.2 mm] slats, pre-inserted into specially designed larger mesh. Style 1b: Type P-V friction fit slats pre-inserted into standard 2 in. [50 mm] chain link mesh.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1083 : 2008 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM A 491 : 1996 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1083 : 2016 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 668 : 2017 : R2022 | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM F 668 : 2017 : REDLINE | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM F 934 : 1996 : R2022 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
| ASTM F 1083 : 2018 : R2022 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 1043 : 2014 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1043 : 2004 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
| ASTM D 1499 : 2013 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM A 491 : 2011 : R2022 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1043 : 2010 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1043 : 2017 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1083 : 2004 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 1345 : 1996 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1043 : 2000 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
| ASTM D 1499 : 2013 : R2021 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM F 1345 : 2010 : REV A | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1083 : 2018 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 552 : 2001 | Standard Terminology Relating to Chain Link Fencing |
| ASTM F 1043 : 2016 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1043 : 2008 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1043 : 2011 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1043 : 2003 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
| ASTM A 491 : 2011 : R2017 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1043 : 2018 : R2022 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1043 : 2011 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1083 : 1997 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 1083 : 2006 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 1083 : 2010 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM A 392 : 1996 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM D 1499 : 2005 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM F 1043 : 2018 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| ASTM F 1043 : 2016 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1043 : 2013 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1083 : 2013 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM F 1043 : 2017 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 1345 : 2010 : REV A : R2015 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM D 1499 : 2013 : REDLINE | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
| ASTM F 1345 : 1996 : R2008 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1345 : 2010 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1083 : 2016-02 | SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES |
| ASTM F 1345 : 1996 : R2003 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM D 1499 : 1999 | Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics |
| ASTM F 668 : 2017 | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| ASTM F 1043 : 2012 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM F 934 : 1996 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
| ASTM A 392 : 2011 : REV A : R2022 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1043 : 2006 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1345 : 2010 : REV A : R2019 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 934 : 1996 : R2017 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
| ASTM A 392 : 2011 : REV A : R2017 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.