ASTM F 2408 : 2016 : R2023
Current
The latest, up-to-date edition.
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
Hardcopy , PDF
English
20-02-2023
Committee |
F 14
|
DocumentType |
Standard
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components.
1.2The requirements of this specification do not apply to vertical bar fence systems utilizing solid bar or wrought iron materials.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 2698 : 2008 : R2018 | Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities |
ASTM F 2814 : 2009 : R2015 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
ASTM F 2699 : 2008 : R2018 | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas |
ASTM A 653/A653M : 2023 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2794 : 1993 : R2024 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM A 653/A653M : 2022 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
ASTM A 1008/A1008M : 2021 : REV A | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM D 3359 : 2022 | Standard Test Methods for Rating Adhesion by Tape Test |
ASTM A 1008/A1008M : 2023 : EDT 1 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM A 1011/A1011M : 2018 : REV A | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM D 822 : 2023 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
ASTM A 1008/A1008M : 2024 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM F 2814 : 2023 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
ASTM B 117 : 2019 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM A 1011/A1011M : 2023 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 3359 : 2023 | Standard Test Methods for Rating Adhesion by Tape Test |
ASTM D 2794 : 1993 : R2019 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 1654 : 2008 : R2016 : EDT 1 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM A 1008/A1008M : 2023 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM D 1654 : 2024 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM E 4 : 2024 | Standard Practices for Force Calibration and Verification of Testing Machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.