ASTM F 2319 : 2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013)
Hardcopy , PDF
31-07-2013
English
01-04-2004
CONTAINED IN VOL. 13.02, 2012 Describes the minimum requirements, including personnel, and patient care equipment and supplies, that must be met before the aircraft can be classified as a fixed wing air ambulance unit.
Committee |
F 30
|
DocumentType |
Standard
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Withdrawn
|
1.1 This specification pertains to fixed wing aircraft (airplanes) used for patient prehospital emergency medical care and transportation. It outlines the minimum requirements, including personnel, and patient care equipment and supplies, that must be met before the aircraft can be classified as a fixed wing air ambulance unit.
1.2 The first part of this specification (Sections through ) describes the minimum aircraft configuration and capability, the minimum number of seats for personnel, and the provisions for the minimum medical equipment and supplies for fixed wing basic life support air ambulances.
1.3 The provisions of this specification plus the provisions of the Advanced Life Support (ALS) Annex comprise the specification for fixed wing advanced life support air ambulances. See Sections 1 and 1.1 of the Advanced Life Support (ALS) Annex for the scope for fixed wing advanced life support air ambulances.
1.4 The provisions of this Sspecification plus the provisions of the Advanced Life Support Annex, plus the provisions in this Specialized Medical Support (SMS) Annex comprise the specification for fixed wing specialized medical support air ambulances. See Sections 1 through 1.3 of the Specialized Medical Support (SMS) Annex for the scope for fixed wing specialized medical support air ambulances.
CSA Z305.3 : 0 | PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES |
SAE AIR 825 : 2012 | OXYGEN EQUIPMENT FOR AIRCRAFT |
CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
MIL-STD-101 Revision C:2014 | COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS |
CFR 29(PTS900-1899) : 2017 | LABOR - DEPARTMENT OF LABOR |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
ANSI Z79.3 : 1983 | OROPHARYNGEAL AND NASOPHARYNGEAL AIRWAYS, |
SAE AS 1198 : 1995 | AEROSPACE WIRE AND CABLES, METHODS OF TESTING |
ASTM F 960 : 1986 | SPECIFICATION FOR MEDICAL AND SURGICAL SUCTION AND DRAINAGE SYSTEMS |
ASTM F 1219 : 2000 | Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment (Withdrawn 2006) |
CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
ASTM F 1031 : 2013 : REDLINE | Standard Practice for Training the Emergency Medical Technician (Basic) (Withdrawn 2022) |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
ASTM F 920 : 1993 : R1999 | Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans (Withdrawn 2007) |
NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
ANSI Z79.14 : 1983 | TRACHEAL TUBES, |
MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
CGA P2 : 0 | TESTING METHOD FOR MEASURING ANNUAL FUEL UTILIZATION EFFICIENCIES OF RESIDENTIAL FURNACES AND BOILERS |
CGA E 7 : 2013 | MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS |
CSA Z305.1 : 0 | NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
ANSI Z79.6 : 1975 | BREATHING TUBES, |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.