ASTM F 1718 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
Hardcopy , PDF
11-11-2014
English
10-06-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.07, 2017 Defines the requirements applicable to the design and construction of rotary positive displacement distillate fuel pumps for shipboard use.
| Committee |
F 25
|
| DocumentType |
Standard
|
| Pages |
7
|
| ProductNote |
Reconfirmed 2001
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers the requirements applicable to the design and construction of rotary positive displacement distillate fuel pumps for shipboard use.
1.2 Lineal dimensions and units of force in this specification are expressed in inches and pounds respectively. A companion metric standard is in the process of preparation.
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| SAE AMS 5894 : 2016 | COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| MIL-STD-740-1 Base Document:1986 | AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| SAE AMS 3215 : 2012 | ACRYLONITRILE BUTADIENE (NBR) RUBBER - AROMATIC FUEL RESISTANT - 65-75 |
| MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASTM F 104 : 2011 : REDLINE | Standard Classification System for Nonmetallic Gasket Materials |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| AGMA 390.03 : 1980 | GEAR CLASSIFICATION, MATERIALS AND MEASURING METHODS FOR UNASSEMBLED GEARS |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| HI 3.6 : 2016 | ROTARY PUMP TESTS |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.