ASTM F 104 : 2011 : R2020
Current
The latest, up-to-date edition.
Standard Classification System for Nonmetallic Gasket Materials
Hardcopy , PDF
English
01-01-2020
Committee |
F 03
|
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This classification system2 provides a means for specifying or describing pertinent properties of commercial nonmetallic gasket materials. Materials composed of asbestos, cork, cellulose, and other organic or inorganic materials in combination with various binders or impregnants are included. Materials normally classified as rubber compounds are not included, since they are covered in Classification D2000. Gasket coatings are not covered, since details thereof are intended to be given on engineering drawings or in separate specifications. Facing materials for laminate composite gasket materials (LCGM) are included in Classification System F104. Assembled LCGMs are covered in Classification F868.
1.2Since all of the properties that contribute to gasket performance are not included, use of the classification system as a basis for selecting materials is limited.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM F 148 : 1995 | Standard Test Method for Binder Durability of Cork Composition Gasket Materials |
ASTM F 36 : 2015 : R2021 | Standard Test Method for Compressibility and Recovery of Gasket Materials |
ASTM F 38 : 2018 : R2024 | Standard Test Methods for Creep Relaxation of a Gasket Material |
ASTM D 5964 : 2016 : R2021 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
ASTM F 38 : 2018 | Standard Test Methods for Creep Relaxation of a Gasket Material |
ASTM F 36 : 2015 | Standard Test Method for Compressibility and Recovery of Gasket Materials |
ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM F 37 : 2006 : R2024 | Standard Test Methods for Sealability of Gasket Materials |
ASTM F 1315 : 2017 | Standard Test Method for Density of a Sheet Gasket Material |
ASTM F 868 : 2017 : R2024 | Standard Classification for Laminated Composite Gasket Materials |
ASTM D 5964 : 1996 | Standard Practice for Rubber IRM 902 and IRM 903 Replacement Oils for ASTM No. 2 and ASTM No. 3 Oils |
ASTM F 152 : 1995 : R2017 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 5964 : 2016 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
ASTM F 147 : 1987 : R2017 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
ASTM F 147 : 1987 : R2024 | Standard Test Method for Flexibility of Non-Metallic Gasket Materials |
ASTM F 146 : 1998 : EDT 1 | Standard Test Methods for Fluid Resistance of Gasket Materials |
ASTM F 1315 : 2017 : R2024 | Standard Test Method for Density of a Sheet Gasket Material |
ASTM F 37 : 2006 : R2019 | Standard Test Methods for Sealability of Gasket Materials |
ASTM F 152 : 2024 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
ASTM F 607 : 1996 | Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces |
ASTM G 21 : 2015 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
ASTM F 152 : 1995 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
ASTM F 868 : 2017 | Standard Classification for Laminated Composite Gasket Materials |
ASTM G 21 : 2015 : R2021 : EDT 1 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
ASTM C 561 : 2016 | Standard Test Method for Ash in a Graphite Sample |
ASTM C 561 : 2023 | Standard Test Method for Ash in a Graphite Sample |
ASTM F 433 : 1998 | Standard Practice for Evaluating Thermal Conductivity of Gasket Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.