ASTM E 867 : 2006 : R2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Vehicle-Pavement Systems
Hardcopy , PDF
25-05-2023
English
16-11-2020
Committee |
E 17
|
DocumentType |
Reference Material
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology covers definitions for approved standards under the jurisdiction of ASTM Committee E17 on Vehicle-Pavement Systems. Definitions of terms specific to an individual standard are listed in the appendix. For additional information, see Terminology D8, Terminology F538, Special Report 113, and SAE J 2047, or contact ISO, PIARC, or CEN.
1.2Other publications may reference this terminology for terms used therein.
1.3The standard containing the term and the responsible subcommittee of Committee E17 is listed at the end of each definition. Revision of the listed standard by that subcommittee will include review of the definition and approved changes or additions will be incorporated herein.
1.4The terms in this terminology standard are listed in categories of the five groups of Committee E17. These are definitions that are in multiple standards in various subcommittees in Groups II to V. The structure of E17 is as follows: Group II on Skid Resistance, E17.21, E17.22, E17.23, E17.24, Group III Roughness E17.31, E17.32, Group IV Pavement Management E17.41, and Group V Intelligent Transportation Systems E17.51, E17.52, E17.54.
1.5This terminology lists the definition as presented in the approved standards. Variation of any term is also listed and referenced to the defined term (for example the term hydroplaning, viscous is also listed and referenced to the defined viscous hydroplaning).
1.6The term and its elements should appear in the following order; term; abbreviation; symbol; dimensions of quantities, measurement units; part of a speech; delimiting phrase; statement of meaning, including specifications limits where applicable; cross references to synonyms or related terms; attribution.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1859/E1859M : 2011 : R2020 | Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique |
ASTM F 2872 : 2019 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
ASTM E 1777 : 2009 : R2019 | Standard Guide for Prioritization of Data Needs for Pavement Management |
ASTM E 1136 : 2019 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
ASTM E 1166 : 2000 : R2019 | Standard Guide for Network Level Pavement Management |
ASTM E 2101 : 2015 : R2020 | Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer |
ASTM E 2157 : 2015 : R2019 | Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter |
ASTM E 3145 : 2019 | Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester) |
ASTM E 524 : 2008 : R2020 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
ASTM E 1911 : 2019 | Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester |
ASTM E 1489 : 2008 : R2019 | Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device |
ASTM E 2793 : 2022 | Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment |
ASTM E 1844 : 2008 : R2020 | Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire |
ASTM E 1448/E1448M : 2009 : R2023 | Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness |
ASTM E 2300 : 2009 : R2017 | Standard Specification for Highway Traffic Monitoring Devices |
ASTM E 2034 : 1999 : R2023 | Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces |
ASTM E 2259 : 2003 : REV A : R2018 | Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data |
ASTM E 950/E950M : 2022 | Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces |
ASTM F 2871 : 2016 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
ASTM E 2133 : 2003 : R2020 | Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface |
ASTM E 2380/E2380M : 2015 : R2019 | Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter |
ASTM E 2340/E2340M : 2011 : R2021 | Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique |
ASTM E 501 : 2008 : R2020 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
ASTM E 1889 : 1997 : R2019 | Standard Guide for Pavement Management Implementation |
ASTM E 2532 : 2009 : R2017 | Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices |
ASTM E 1318 : 2009 : R2017 | Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods |
ASTM F 2870 : 2019 : EDT 1 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
ASTM E 2468 : 2005 : R2018 | Standard Practice for Metadata to Support Archived Data Management Systems |
ASTM E 1082 : 1990 : R2017 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
ASTM E 2883 : 2013 : R2019 | Standard Guide for Evaluation and Calibration, Continuous Friction Measurement Equipment (CFME) |
ASTM E 1703/E1703M : 2010 : R2023 | Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge |
ASTM E 2665 : 2008 : R2017 | Standard Specification for Archiving ITS-Generated Traffic Monitoring Data |
ASTM E 2415 : 2005 : R2018 | Standard Practice for Installing Piezoelectric Highway Traffic Sensors |
ASTM F 2493 : 2020 | Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire |
ASTM E 1890 : 2011 : R2023 | Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment |
ASTM E 1927 : 1998 : R2023 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
ASTM E 274/E274M : 2015 : R2020 | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
ASTM E 965 : 2015 : R2019 | Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique |
ASTM F 3611 : 2022 : EDT 1 | Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire |
ASTM E 2560 : 2023 | Standard Specification for Data Format for Pavement Profile |
ASTM E 1960 : 2007 : R2023 | Standard Practice for Calculating International Friction Index of a Pavement Surface |
ASTM E 1845 : 1996 | Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth |
ASTM E 965 : 1996 | Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique |
ASTM E 1170 : 1997 : R2023 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
ASTM E 1703/E1703M : 2010 : R2015 | Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge |
ASTM E 1926 : 2008 : R2015 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
ASTM E 1337 : 1990 : R1996 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
ASTM D 8 : 2022 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM E 1703/E1703M : 2010 : R2023 | Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge |
ASTM E 1778 : 1998 : REV A | Standard Terminology Relating to Pavement Distress |
ASTM E 1926 : 2008 : R2021 | Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements |
ASTM D 8 : 2022 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM E 1170 : 1997 : R2017 | Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces |
ASTM F 538 : 2013 | Standard Terminology Relating to the Characteristics and Performance of Tires |
ASTM E 1337 : 1990 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire |
ASTM E 1889 : 1997 | Standard Guide for Pavement Management Implementation |
ASTM D 8 : 2021 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM E 1927 : 1998 : R2023 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
ASTM D 8 : 2019 | Standard Terminology Relating to Materials for Roads and Pavements |
ASTM E 1337 : 2019 | Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire |
ASTM F 538 : 2022 | Standard Terminology Relating to Characteristics and Performance of Tires |
ASTM F 538 : 2021 | Standard Terminology Relating to Characteristics and Performance of Tires |
ASTM E 1859 : 1997 | Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique |
ASTM E 1927 : 1998 : R2018 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
ASTM D 8 : 2020 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.