ASTM E 636 : 2014 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
Available format(s)
Hardcopy , PDF
Superseded date
27-01-2020
Superseded by
Language(s)
English
Published date
01-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 10
|
| DocumentType |
Guide
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide discusses test procedures that can be used in conjunction with, but not as alternatives to, those required by Practices E185 and E2215 for the surveillance of nuclear reactor vessels. The supplemental mechanical property tests outlined permit the acquisition of additional information on radiation-induced changes in mechanical properties of the reactor vessel steels.
1.2This guide provides recommendations for the preparation of test specimens for irradiation, and identifies special precautions and requirements for reactor surveillance operations and post-irradiation test planning. Guidance on data reduction and computational procedures is also given. Reference is made to other ASTM test methods for the physical conduct of specimen tests and for raw data acquisition.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1921 : 2009 : REV B | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV C | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1253 : 2007 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1820 : 2013 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2009 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2008 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2005 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2017 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2008 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2011 : EDT 2 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2011 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2017 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2011 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2016 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2013 : REV A | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2006 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2298 : 2015 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2018 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2011 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2015 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1820 : 2008 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2009 : REV C : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2008 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2013 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2009 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1921 : 2015 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2002 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1921 : 1997 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2007 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 2215 : 2010 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1921 : 2014 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2005 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2016 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1253 : 1999 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1820 : 2015 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2015 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2019 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 2298 : 2018 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1921 : 2018 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2013 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2006 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2019 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1253 : 2013 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1921 : 2014 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2019 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2018 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2015 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2018 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2009 : REV C : EDT 2 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2016 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2002 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf>o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 1999 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2001 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2215 : 2018 | Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1820 : 2013 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2015 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 2298 : 2013 | Standard Test Method for Instrumented Impact Testing of Metallic Materials |
| ASTM E 1820 : 2009 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2005 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2003 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2015 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2010 : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.