ASTM E 363 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
English
16-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.05, 2016 Defines the chemical analysis of chromium and ferrochromium having chemical compositions.
| Committee |
E 01
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1These test methods cover the chemical analysis of chromium and ferrochromium having chemical compositions within the following limits:
| Element | Composition, % | |
| Aluminum | 0.25 max | |
| Antimony | 0.005 max | |
| Arsenic | 0.005 max | |
| Bismuth | 0.005 max | |
| Boron | 0.005 max | |
| Carbon | 9.00 max | |
| Chromium | 51.0 to 99.5 | |
| Cobalt | 0.10 max | |
| Columbium | 0.05 max | |
| Copper | 0.05 max | |
| Lead | 0.005 max | |
| Manganese | 0.75 max | |
| Molybdenum | 0.05 max | |
| Nickel | 0.50 max | |
| Nitrogen | 6.00 max | |
| Phosphorus | 0.03 max | |
| Silicon | 12.00 max | |
| Silver | 0.005 max | |
| Sulfur | 0.07 max | |
| Tantalum | 0.05 max | |
| Tin | 0.005 max | |
| Titanium | 0.50 max | |
| Vanadium | 0.50 max | |
| Zinc | 0.005 max | |
| Zirconium | 0.05 max |
1.2The analytical procedures appear in the following order:
| Sections | |
| Arsenic by the Molybdenum Blue Spectrophotometric Test Method | 10 – 20 |
| Lead by the Dithizone Spectrophotometric Test Method | 21 – 31 |
| Chromium by the Sodium Peroxide Fusion-Titrimetric Test Method | 32 – 38 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6 and in special ”Warning” paragraphs throughout these test methods.
| ASTM A 481 : 2005 : R2010 | Standard Specification for Chromium Metal |
| ASTM A 101 : 2004 : R2009 | Standard Specification for Ferrochromium |
| ASTM E 360 : 1996 : R2001 | Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon (Withdrawn 2006) |
| ASTM A 481 : 2005 : R2015 | Standard Specification for Chromium Metal |
| ASTM E 31 : 1985 : R1989 | Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995) |
| SAE AMS 7875 : 2017 | POWDER, CHROMIUM CARBIDE PLUS NICKEL-CHROMIUM ALLOY, 75CR[2]C[3] + 25 (80NI - 20CR ALLOY) |
| BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| MIL-P-83348 Revision A:1983 | POWDER, PLASMA SPRAY |
| ASTM A 101 : 2004 | Standard Specification for Ferrochromium |
| ASTM E 360 : 1996 | Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon |
| ASTM A 101 : 2004 : R2014 : EDT 1 | Standard Specification for Ferrochromium |
| ASTM A 481 : 2005 | Standard Specification for Chromium Metal |
| AWS C2.25/C2.25M : 2012 | SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK - WIRE AND RODS |
| I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
| ASTM A 101 : 2004 : R2014 | Standard Specification for Ferrochromium |
| EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 32 : 2015 | Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.