• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 354 : 2021

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

Available format(s)

Hardcopy , PDF

Superseded date

09-03-2022

Language(s)

English

Published date

01-04-2021

£82.93
Excluding VAT

Committee
E 01
DocumentType
Test Method
Pages
37
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:

  Element

Composition Range, %

Aluminum

0.005

to

18.00

Beryllium

0.001

to

 0.05

Boron

0.001

to

 1.00

Calcium

0.002

to

  0.05

Carbon

0.001

to

 1.10

Chromium

0.10 

to

33.00

Cobalt

0.10 

to

75.00

Columbium (Niobium)

0.01 

to

 6.0

Copper

0.01 

to

10.00

Iron

0.01 

to

85.00

Magnesium

0.001

to

 0.05

Manganese

0.01 

to

 3.0

Molybdenum

0.01 

to

30.0

Nickel

0.10 

to

84.0

Nitrogen

0.001

to

 0.20

Phosphorus

0.002

to

 0.08

Silicon

0.01 

to

 5.00

Sulfur

0.002

to

 0.10

Tantalum

0.005

to

10.0

Titanium

0.01 

to

 5.00

Tungsten

0.01 

to

18.00

Vanadium

0.01 

to

 3.25

Zirconium

0.01 

to

 2.50

1.2The test methods in this standard are contained in the sections indicated below:

Sections

Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 %
   to 7.00 %)

100 – 107

Carbon, Total, by the Combustion-Thermal Conductivity Method—Discontinued 1986

124 – 134

Carbon, Total, by the Combustion Gravimetric Method (0.05 % to
 1.10 %)—Discontinued 2014

79 – 89

Chromium by the Atomic Absorption Spectrometry Method
   (0.006 % to 1.00 %)

165 – 174

Chromium by the Peroxydisulfate Oxidation—Titration Method
 (0.10 % to 33.00 %)

175 – 183

Chromium by the Peroxydisulfate-Oxidation Titrimetric Method—
   Discontinued 1980

116 – 123

Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 %
   to 75 %)

53 – 60

Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.10 %
    to 5.0 %)

61 – 70

Copper by Neocuproine Spectrophotometric Method (0.01 % to
   10.00 %)

90 – 99

Copper by the Sulfide Precipitation-Electrodeposition Gravimetric
 Method (0.01 % to 10.00 %)

71 – 78

Iron by the Silver Reduction Titrimetric Method (1.0 % to 50.0 %)

192 –199

Manganese by the Metaperiodate Spectrophotometric Method
   (0.05 % to 2.00 %)

9 – 18

Molybdenum by the Ion Exchange—8-Hydroxyquinoline Gravi-
 metric Method (1.5 % to 30 %)

184 – 191

Molybdenum by the Thiocyanate Spectrophotometric Method
   (0.01 % to 1.50 %)

153 – 164

Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to
 84.0 %)

135 – 142

Phosphorus by the Molybdenum Blue Spectrophotometric Method
   (0.002 % to 0.08 %)

19  – 30

Silicon by the Gravimetric Method (0.05 % to 5.00 %)

46  – 52

Sulfur by the Gravimetric Method—Discontinued
   1988

Former 30  – 36

Sulfur by the Combustion-Iodate Titration Method (0.005 % to
 0.1 %)—Discontinued 2014

37  – 45

Sulfur by the Chromatographic Gravimetric Method—Discontinued
   1980

108 – 115

Tin by the Solvent Extraction–Atomic Absorption Spectrometry
   Method (0.002 % to 0.10 %)

143  – 152

1.3Methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4Some of the composition ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5Units—The values stated in SI units are to be regarded as standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM A 703/A703M : 2020 : REV A Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 1377 : 2013 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F 467M : 2006 : REV A : R2018 Standard Specification for Nonferrous Nuts for General Use (Metric)
ASTM E 352 : 2018 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
ASTM A 751 : 2020 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 561 : 2019 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM E 1473 : 2016 Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
ASTM E 32 : 2015 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM F 468M : 2006 : R2018 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
ASTM F 1466 : 2020 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications (Withdrawn 2024)
ASTM F 3055 : 2014 : REV A Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM F 2281 : 2004 : R2017 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM A 494/A494M : 2018 : REV A Standard Specification for Castings, Nickel and Nickel Alloy
ASTM F 31 : 2016 Standard Specification for Nickel-Chromium-Iron Sealing Alloys
ASTM B 804 : 2002 : R2018 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM A 781/A781M : 2020 : REV A Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM F 75 : 2018 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM A 957/A957M : 2020 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM F 961 : 2020 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
ASTM B 757 : 2000 : R2016 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys <brk/>(UNS N06110) Welded Pipe (Withdrawn 2021)
ASTM F 1684 : 2006 : R2021 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications (Withdrawn 2024)
ASTM B 853 : 2016 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM A 985/A985M : 2020 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
ASTM E 353 : 2019 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM F 2229 : 2021 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
ASTM E 351 : 2018 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM F 90 : 2014 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 2886 : 2017 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
ASTM F 138 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
ASTM F 468 : 2016 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM F 2581 : 2012 : R2017 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
ASTM E 350 : 2018 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM F 3160 : 2021 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ASTM F 1058 : 2016 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
ASTM F 1314 : 2018 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
ASTM F 3042 : 2013 : R2018 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
ASTM F 562 : 2013 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F 139 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
ASTM F 1537 : 2020 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 467 : 2013 : R2018 Standard Specification for Nonferrous Nuts for General Use
ASTM B 758 : 2000 : R2016 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys <brk/>(UNS N06110) Welded Tube (Withdrawn 2021)
ASTM F 1377 : 2021 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
ASTM F 3056 : 2014 : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM E 32 : 2021 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM A 957/A957M : 2021 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 562 : 2022 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM B 853 : 2016 : R2021 : EDT 1 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM F 31 : 2021 Standard Specification for Nickel-Chromium-Iron Sealing Alloys (Withdrawn 2024)
ASTM F 3055 : 2014 : REV A : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM A 781/A781M : 2021 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 985/A985M : 2021 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

ASTM E 135 : 2021 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2021 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2020 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.