ASTM E 3203 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
Hardcopy , PDF
07-11-2019
English
01-04-2019
This test method specifies a procedure for analysis of dried paint, soil, and dust wipe samples collected in and around buildings and related structures for lead content using inductively coupled plasma-optical emission spectroscopy (ICP-OES).
Committee |
D 22
|
DocumentType |
Test Method
|
Pages |
13
|
ProductNote |
THIS STANDARD ALSO REFERES TO : ASTM E 2914/E2914M, EPA SW-846, JCGM 100
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This test method specifies a procedure for analysis of dried paint, soil, and dust wipe samples collected in and around buildings and related structures for lead content using inductively coupled plasma-optical emission spectroscopy (ICP-OES).
1.2This test method should be used by analysts experienced in the use of ICP-OES, the interpretation of spectral and matrix interferences, and procedures for their correction. For determination of lead (Pb) and other metals in air by ICP-OES, see Test Method D7035.
1.3This test method cites specific methods for preparing test solutions of dried paint, soil, and wipe samples for analysis.
1.4It is the user’s responsibility to ensure the validity of this test method for sampling materials of untested matrices.
1.5No detailed operating instructions are provided because of differences among various makes and models of suitable ICP-OES instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This test method does not address comparative accuracy of different devices or the precision between instruments of the same make and model.
1.6This test method contains notes that are explanatory and are not part of the mandatory requirements of this test method.
1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1726 : 2001 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 7035 : 2016 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM E 1583 : 1993 | Practice for Evaluating Laboratories Engaged in the Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures (Withdrawn 1998) |
ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1645 : 2001 : R2007 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM E 1644 : 2004 : R2012 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1979 : 2004 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1645 : 1994 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 7035 : 2010 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM E 1729 : 1999 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 2115 : 2000 | Standard Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children |
ASTM D 6785 : 2002 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 1605 : 2001 : REV B | Standard Terminology Relating to Lead in Buildings |
ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
ASTM D 6785 : 2008 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1645 : 2001 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 2115 : 2006 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities (Withdrawn 2015) |
ASTM D 6966 : 2008 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM E 1727 : 2005 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) |
ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1908 : 1997 | Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb) |
ASTM E 1979 : 2012 : R2016 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1726 : 2001 : R2009 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1729 : 2004 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM E 1908 : 2003 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 1605 : 2000 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1605 : 2018 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1605 : 2018 : REV A | Standard Terminology Relating to Lead in Buildings |
ASTM E 1908 : 2010 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1727 : 1999 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1605 : 2001 : REV A | Standard Terminology Relating to Lead in Buildings |
ASTM D 7440 : 2008 : R2015 : EDT 1 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
ASTM E 1728 : 2002 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1729 : 2005 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014) |
ASTM E 1979 : 2012 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM E 1605 : 2003 : EDT 1 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1728 : 2010 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 7440 : 2008 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 6966 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM E 1605 : 2003 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1644 : 2004 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1727 : 2004 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2115 : 2005 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and Other Facilities Frequented by Children |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM E 1979 : 1998 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1644 : 1998 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1605 : 2001 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1726 : 1995 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 2115 : 2005 : REV A | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 1644 : 2004 : R2016 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 7035 : 2004 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM D 6966 : 2013 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
ASTM E 1605 : 2002 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1728 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1908 : 2016 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 1645 : 2001 : R2016 : EDT 1 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.