ASTM E 3097 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
Hardcopy , PDF
17-07-2023
English
12-03-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.01, 2018 Specifies procedures for determining the transformation temperatures, the related strains and the residual strain when a shape memory alloy is thermally cycled under an applied axial stress.
| Committee |
E 08
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method defines procedures for determining the transformation temperatures, the related strains and the residual strain when a shape memory alloy is thermally cycled under an applied axial stress. This test is done to provide data for the design and selection of shape memory alloy thermoelastic actuators.
1.2Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1169 : 2017 : EDT 1 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 1169 : 2014 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM E 1169 : 1989 : R1996 | Standard Guide for Conducting Ruggedness Tests |
| ASTM F 2516 : 2022 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM F 2063 : 2000 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
| ASTM E 1169 : 2018 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 2516 : 2007 : EDT 2 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 83 : 2016 | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM F 2004 : 2003 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2004 : 2016 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2082 : 2003 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 2368 : 2010 : R2017 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| ASTM F 2005 : 2000 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 83 : 1998 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
| ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1169 : 2021 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 1169 : 2017 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 2368 : 2004 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| ASTM F 2063 : 2012 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM E 2368 : 2004 : EDT 1 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| ASTM E 1169 : 2002 | Standard Guide for Conducting Ruggedness Tests |
| ASTM F 2063 : 2018 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM F 2005 : 2005 : R2015 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 2004 : 2000 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM F 2082 : 2006 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery (Withdrawn 2015) |
| ASTM F 2516 : 2006 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM F 2063 : 2005 | Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM F 2004 : 2005 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2005:2005 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM F 2005 : 2005 : R2010 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 9 : 1989 : REV A : R1995 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| ASTM F 2082 : 2001 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM F 2516 : 2018 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 1169 : 2007 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM F 2004 : 2005 : R2010 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2005 : 2021 | Standard Terminology for Nickel-Titanium Shape Memory Alloys |
| ASTM E 1169 : 2013 : REV A | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 1169 : 2012 | Standard Practice for Conducting Ruggedness Tests |
| ASTM F 2516 : 2007 : EDT 1 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 1169 : 2020 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 1169 : 2012 : REV A | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM F 2082 : 2015 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM F 2516 : 2005 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 2368 : 2010 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
| ASTM F 2004 : 2017 | Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
| ASTM F 2516 : 2014 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM F 2516 : 2007 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM E 1169 : 2013 | Standard Practice for Conducting Ruggedness Tests |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.