ASTM E 2798 : 2019
Current
The latest, up-to-date edition.
Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
Hardcopy , PDF
English
01-12-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 35
|
| DocumentType |
Test Method
|
| Pages |
6
|
| ProductNote |
This standard is also refers to ANSI/ASAE S572.2.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method is used to characterize the performance of pesticide spray drift reduction adjuvants with respect to spray droplet size spectra, volume of fines, and other use parameters under simulated field ground application conditions. This test method does not include any procedures to evaluate if pump shear degrades the performance of the spray drift reduction adjuvant.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
Note 1:This method uses industry-standard units. The following conversions to SI units are provided for convenience: 1 mph = 1.61 kph; 1 in = 2.54 cm; 1 gal/acre = 9.36 L/hectare.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 1260 : 2003 : R2020 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 609 : 2021 | Standard Terminology Relating to Pesticides |
| ASTM E 609 : 2001 : REV A | Standard Terminology Relating to Pesticides |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1620 : 1997 : R2016 | Standard Terminology Relating to Liquid Particles and Atomization |
| ASTM E 1260 : 2003 : R2015 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| ASTM E 609 : 2019 | Standard Terminology Relating to Pesticides |
| ASTM E 1620 : 1997 : R2022 | Standard Terminology Relating to Liquid Particles and Atomization |
| ASTM E 609 : 2023 | Standard Terminology Relating to Pesticides |
| ASTM E 609 : 2024 | Standard Terminology Relating to Pesticides |
| ASTM E 2408 : 2004 : R2023 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
| ASTM E 1519 : 2024 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1519 : 2016 : R2020 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
| ASTM E 2408 : 2004 : R2015 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
| ASTM D 3825 : 1990 : R1995 | Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.