ASTM E 2736 : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Digital Detector Array Radiology
Available format(s)
Hardcopy , PDF
Superseded date
03-09-2020
Superseded by
Language(s)
English
Published date
15-04-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 07
|
| DocumentType |
Guide
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This standard is a user guide, which is intended to serve as a tutorial for selection and use of various digital detector array systems nominally composed of the detector array and an imaging system to perform digital radiography. This guide also serves as an in-detail reference for the following standards: Practices E2597, , and E2737.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| 17/30361503 DC : 0 | BS EN ISO 20769-1 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| I.S. EN 12681-2:2017 | FOUNDING - RADIOGRAPHIC TESTING - PART 2: TECHNIQUES WITH DIGITAL DETECTORS |
| I.S. EN 16407-2:2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| ASTM E 2737 : 2010 | Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
| EN 12681-2:2017 | Founding - Radiographic testing - Part 2: Techniques with digital detectors |
| UNI EN ISO 17636-2 : 2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS |
| BS EN 16407-2:2014 | Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Double wall radiographic inspection |
| ASTM E 1000 : 2016 : REDLINE | Standard Guide for Radioscopy |
| BS EN 16407-1:2014 | Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Tangential radiographic inspection |
| UNE-EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| UNI EN 16407-2 : 2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| ASTM E 2982 : 2014 : EDT 1 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 2662 : 2015 : REDLINE | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| MIL-HDBK-6870 Revision B:2012 | NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
| MIL-HDBK-6870 Revision C:2020 | NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
| DIN EN ISO 17636-2:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| BS EN ISO 17636-2:2013 | Non-destructive testing of welds. Radiographic testing X- and gamma-ray techniques with digital detectors |
| 17/30361506 DC : 0 | BS EN ISO 20769-2 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AN DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION |
| I.S. EN 16407-1:2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
| ASTM E 1000 : 2016 | Standard Guide for Radioscopy |
| ASTM E 2662 : 2015 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| EN 16407-2:2014 | Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN 16407-1:2014 | Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection |
| BS EN 12681-2:2017 | Founding. Radiographic testing Techniques with digital detectors |
| I.S. EN ISO 17636-2:2013 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS (ISO 17636-2:2013) |
| UNI EN 16407-1 : 2014 | NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION |
| ASTM E 94/E94M : 2017 : REDLINE | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 2737 : 2010 : R2018 | Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
| ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
| ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.