ASTM E 230/E230M : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
Hardcopy , PDF
09-01-2024
English
01-12-2017
This specification contains reference tables (Tables 8 to 25) that give temperature-electromotive force (emf) relationships for Types B, E, J, K, N, R, S, T, and C thermocouples.
Committee |
E 20
|
DocumentType |
Standard
|
Pages |
168
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification contains reference tables (Tables 8 to 25) that give temperature-electromotive force (emf) relationships for Types B, E, J, K, N, R, S, T, and C thermocouples.2 These are the thermocouple types most commonly used in industry. The tables contain all of the temperature-emf data currently available for the thermocouple types covered by this standard and may include data outside of the recommended upper temperature limit of an included thermocouple type.
1.2In addition, the specification includes standard and special tolerances on initial values of emf versus temperature for thermocouples (Table 1), thermocouple extension wires (Table 2), and compensating extension wires for thermocouples (Table 3). Users should note that the stated tolerances apply only to the temperature ranges specified for the thermocouple types as given in Tables 1, 2, and 3, and do not apply to the temperature ranges covered in Tables 8 to 25.
1.3Tables 4 and 5 provide insulation color coding for thermocouple and thermocouple extension wires as customarily used in the United States.
1.4Recommendations regarding upper temperature limits for the thermocouple types referred to in 1.1 are provided in Table 6.
1.5Tables 26 to 45 give temperature-emf data for single-leg thermoelements referenced to platinum (NIST Pt-67). The tables include values for Types BP, BN, JP, JN, KP (same as EP), KN, NP, NN, TP, and TN (same as EN).
1.6Tables for Types RP, RN, SP, and SN thermoelements are not included since, nominally, Tables 18 to 21 represent the thermoelectric properties of Type RP and SP thermoelements referenced to pure platinum. Tables for the individual thermoelements of Type C are not included because materials for Type C thermocouples are normally supplied as matched pairs only.
1.7Polynomial coefficients which may be used for computation of thermocouple emf as a function of temperature are given in Table 7. Coefficients for the emf of each thermocouple pair as well as for the emf of most individual thermoelements versus platinum are included. Coefficients for type RP and SP thermoelements are not included since they are nominally the same as for types R and S thermocouples, and coefficients for type RN or SN relative to the nominally similar Pt-67 would be insignificant. Coefficients for the individual thermoelements of Type C thermocouples have not been established.
1.8Coefficients for sets of inverse polynomials are given in Table 46. These may be used for computing a close approximation of temperature (°C) as a function of thermocouple emf. Inverse functions are provided only for thermocouple pairs and are valid only over the emf ranges specified.
1.9This specification is intended to define the thermoelectric properties of materials that conform to the relationships presented in the tables of this standard and bear the letter designations contained herein. Topics such as ordering information, physical and mechanical properties, workmanship, testing, and marking are not addressed in this specification. The user is referred to specific standards such as Specifications E235, E574, E585/E585M, E608/E608M, E1159, or E2181/E2181M for guidance in these areas.
1.10The temperature-emf data in this specification are intended for industrial and laboratory use.
1.11Thermocouple color codes per IEC 584–3 are given in Appendix X1.
1.12The values stated in either SI units or inch-pound units are to be regarded separately as standard.
1.12.1The values stated in brackets are not conversions to the values they succeed and therefore shall be used independently of the preceding values.
1.12.2The values given in parentheses are conversions of the values they succeed.
1.12.3Combining values from the two systems may result in non-conformance with the standard.
1.13This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.14This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
AASHTO T 71:2022 | Standard Method of Test for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
ASTM E 696 : 2023 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
ASTM C 1425 : 2019 | Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
ASTM D 5869/D5869M : 2007 : REV A : R2023 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM D 1881 : 2017 | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
ASTM D 3161/D3161M : 2020 | Standard Test Method for Wind Resistance of Steep Slope Roofing Products (Fan-Induced Method) |
ASTM D 2746/D2746M : 2018 : R2023 | Standard Test Method for Staining Tendency of Asphalt (Stain Index) |
ASTM E 2877 : 2012 : R2019 | Standard Guide for Digital Contact Thermometers |
ASTM E 422 : 2022 | Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter |
ASTM D 8055 : 2023 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
ASTM C 113 : 2014(R2019) | Standard Test Method for Reheat Change of Refractory Brick |
ASTM E 235/E235M : 2023 | Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications |
ASTM E 3119 : 2019 | Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing |
ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
ASTM E 644 : 2011(R2019) | Standard Test Methods for Testing Industrial Resistance Thermometers |
ASTM E 2820 : 2013 : R2019 | Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors |
ASTM E 1684/E1684M : 2019 | Standard Specification for Miniature Thermocouple Connectors |
ASTM E 344 : 2023 | Terminology Relating to Thermometry and Hydrometry |
ASTM D 243/D243M : 2022 | Standard Test Method for Residue of Specified Penetration |
ASTM D 3791/D3791M : 2011 : R2018 | Standard Practice for Evaluating the Effects of Heat on Asphalts |
ASTM D 7820 : 2019 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
ASTM E 633 : 2021 : REV A | Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing |
ASTM E 228 : 2022 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
ASTM C 372 : 1994 : R2020 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method |
ASTM B 998 : 2017 | Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings |
ASTM D 5931 : 2020 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
ASTM E 601 : 2020 | Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air |
ASTM D 7933 : 2022 | Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers |
ASTM D 7873 : 2022 : REV A | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
ASTM D 6194 : 2023 | Standard Test Method for Glow-Wire Ignition of Materials |
ASTM E 207 : 2021 | Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison With Reference Thermoelement of Similar EMF-Temperature Properties |
ASTM C 210 : 1995 : R2019 | Standard Test Method for Reheat Change of Insulating Firebrick |
ASTM D 1122 : 2022 | Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
ASTM E 1129/E1129M : 2019 | Standard Specification for Thermocouple Connectors |
ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
ASTM E 2730 : 2022 | Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits |
ASTM D 139 : 2023 | Standard Test Method for Float Test for Asphalt Materials |
ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM D 1120 : 2022 | Standard Test Method for Boiling Point of Engine Coolants |
ASTM D 7840 : 2012 : R2017 | Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware |
ASTM E 1159 : 1998 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM E 1159 : 2015 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM E 1159 : 2015 : R2020 : EDT 1 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM E 608/E608M : 2013 : R2019 | Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples |
ASTM E 1159 : 1998 : R2009 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM E 1159 : 1998 : R2003 | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM E 585/E585M : 2018 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
ASTM E 585/E585M : 2023 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable |
ASTM E 574 : 2023 | Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.