ASTM E 2215 : 2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
Available format(s)
Hardcopy , PDF
Superseded date
03-06-2024
Superseded by
Language(s)
English
Published date
01-06-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice covers the evaluation of test specimens and dosimetry from light water moderated nuclear power reactor pressure vessel surveillance capsules.
| Committee |
E 10
|
| DocumentType |
Standard Practice
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the evaluation of test specimens and dosimetry from light water moderated nuclear power reactor pressure vessel surveillance capsules.
1.2Additionally, this practice provides guidance on reassessing withdrawal schedule for design life and operation beyond design life.
1.3This practice is one of a series of standard practices that outline the surveillance program required for nuclear reactor pressure vessels. The surveillance program monitors the irradiation-induced changes in the ferritic steels that comprise the beltline of a light-water moderated nuclear reactor pressure vessel.
1.4This practice along with its companion surveillance program practice, Practice E185, is intended for application in monitoring the properties of beltline materials in any light-water moderated nuclear reactor.2
1.5Modifications to the standard test program and supplemental tests are described in Guide E636.
1.6The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 853 : 2018 | Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results |
| ASTM E 185 : 2016 | Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1253 : 2013 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1214 : 2011 : R2018 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM E 509/E509M : 2014 | Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels |
| ASTM E 636 : 2014 : EDT 1 | Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels |
| ASTM E 706 : 2016 | Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards |
| ASTM E 531 : 2013 | Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022) |
| ASTM E 900 : 2015 : EDT 1 | Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials |
| ASTM E 2956 : 2014 | Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels |
| ASTM E 2956 : 2023 | Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels |
| ASTM E 706 : 2023 | Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards |
| ASTM E 636 : 2020 | Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels |
| ASTM E 509/E509M : 2021 | Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels |
| ASTM E 1921 : 2009 : REV B | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV C | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1253 : 2007 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1820 : 2013 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2009 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2023 : REV B | Standard Test Method for Measurement of Fracture Toughness |
| ASTM A 370 : 2021 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 1921 : 2008 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 185 : 1998 | Standard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels, E706 (IF) |
| ASTM E 693 : 2023 | Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA) |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 23 : 2024 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1921 : 2005 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1921 : 2017 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2021 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2008 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 693 : 2017 | Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA) |
| ASTM E 1820 : 2011 : EDT 2 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1820 : 2020 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 23 : 2022 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1253 : 2021 | Standard Guide for Reconstitution of Charpy-Sized Specimens |
| ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| ASTM E 1921 : 2011 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2017 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2011 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2016 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2006 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2018 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2011 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 900 : 2015 : EDT 2 | Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials |
| ASTM E 1214 : 2011 : R2018 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM E 1921 : 2021 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1214 : 2006 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
| ASTM E 1820 : 2008 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1214 : 1987 : R2000 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E706(IIIE) |
| ASTM E 1921 : 2009 : REV C : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2023 : REV B | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2008 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 170 : 2020 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 1921 : 2013 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 23 : 2023 : REV A | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1921 : 2015 : REV A : EDT 1 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2019 : REV B | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2020 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 1997 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2007 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1214 : 2011 : R2023 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM E 1921 : 2014 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2017 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 170 : 2023 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 853 : 2023 | Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results |
| ASTM E 1820 : 2005 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM A 370 : 2023 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 1820 : 2022 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 23 : 2018 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1253 : 1999 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 23 : 2002 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1820 : 2015 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2015 : REV A | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2020 : REV B | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2018 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2020 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2019 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV A | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2018 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2011 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 208 : 2020 : EDT 1 | Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| ASTM E 1921 : 2022 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2013 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2006 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 23 : 2023 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM E 1214 : 2011 : EDT 1 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance |
| ASTM E 1820 : 2023 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2024 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM A 370 : 2011 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 1253 : 2013 | Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens |
| ASTM E 1921 : 2014 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1214 : 2011 | Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE) |
| ASTM E 1921 : 2019 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2023 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2018 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2015 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2018 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 900 : 2021 | Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials |
| ASTM A 370 : 2022 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 1921 : 2021 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2023 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2009 : REV C : EDT 2 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2016 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2020 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2002 | Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2012 | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf>o</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 208 : 2020 | Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels |
| ASTM E 1921 : 2022 : REV A | Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range |
| ASTM E 185 : 2021 | Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels |
| ASTM E 1820 : 1999 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2001 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2013 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2015 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2022 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2009 | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1820 : 2005 : REV A | Standard Test Method for Measurement of Fracture Toughness |
| ASTM E 1921 : 2003 | Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range |
| ASTM A 370 : 2024 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM E 1921 : 2015 | Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range |
| ASTM E 1921 : 2010 : EDT 1 | Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range |
| ASTM E 1820 : 2023 : REV A | Standard Test Method for Measurement of Fracture Toughness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.