ASTM E 2005 : 2021
Current
The latest, up-to-date edition.
Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
Hardcopy , PDF
English
05-03-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 10
|
| DocumentType |
Guide
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers facilities and procedures for benchmarking neutron measurements and calculations. Particular sections of the guide discuss: the use of well-characterized benchmark neutron fields to calibrate integral neutron sensors; the use of certified-neutron-fluence standards to calibrate radiometric counting equipment or to determine interlaboratory measurement consistency; development of special benchmark fields to test neutron transport calculations; use of well-known fission spectra to benchmark spectrum-averaged cross sections; and the use of benchmarked data and calculations to determine the uncertainties in derived neutron dosimetry results.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 944 : 2019 | Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance |
| ASTM E 1006 : 2021 | Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments |
| ASTM E 706 : 2016 | Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards |
| ASTM E 1855 : 2020 | Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors |
| ASTM E 1018 : 2020 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
| ASTM E 910 : 2018 | Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance |
| ASTM E 1854 : 2019 | Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts |
| ASTM E 1005 : 2016 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance |
| ASTM E 261 : 2016 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
| ASTM E 844 : 2018 | Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance |
| ASTM D 1879 : 2006 : R2014 | Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
| ASTM E 2006 : 2016 | Standard Guide for Benchmark Testing of Light Water Reactor Calculations |
| ASTM E 2006 : 2022 | Standard Guide for Benchmark Testing of Light Water Reactor Calculations |
| ASTM E 266 : 1992 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM E 482 : 2016 | Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance |
| ASTM E 264 : 2019 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
| ASTM E 523 : 2016 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
| ASTM E 170 : 2024 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 266 : 2017 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM E 170 : 2020 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 523 : 2021 : EDT 1 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
| ASTM E 523 : 2021 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper |
| ASTM E 261 : 2016 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
| ASTM E 170 : 2023 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 526 : 2022 | Standard Test Method for Measuring Fast-Neutron Reaction Rates By Radioactivation of Titanium |
| ASTM E 526 : 2017 : EDT 1 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium |
| ASTM E 264 : 1992 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel |
| ASTM E 910 : 2024 | Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance |
| ASTM E 2006 : 2016 | Standard Guide for Benchmark Testing of Light Water Reactor Calculations |
| ASTM E 261 : 2016 : R2021 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
| ASTM E 266 : 2023 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
| ASTM E 482 : 2022 | Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.