ASTM E 178 : 2016 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Dealing With Outlying Observations
Available format(s)
Hardcopy , PDF
Superseded date
01-07-2021
Superseded by
Language(s)
English
Published date
12-09-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 11
|
| DocumentType |
Standard Practice
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers outlying observations in samples and how to test the statistical significance of outliers.
1.2The system of units for this standard is not specified. Dimensional quantities in the standard are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| ASTM D 8048 : 2021 | Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine |
| ASTM D 8271 : 2021 | Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete |
| ASTM D 7484 : 2021 | Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine |
| ASTM D 7846 : 2016 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
| ASTM C 1174 : 2020 | Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste |
| ASTM D 7807 : 2020 | Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection |
| ASTM C 156 : 2020 | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
| ASTM C 1335 : 2012 : R2017 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM D 7422 : 2019 | Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine |
| ASTM E 1994 : 2009 : R2018 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
| ASTM D 2256/D2256M : 2010 : R2015 | Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM E 2862 : 2018 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
| ASTM E 1859/E1859M : 2011 : R2020 | Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique |
| ASTM D 8040 : 2018 | Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware |
| ASTM D 5463 : 2018 | Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water |
| ASTM D 7290 : 2006 : R2017 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| ASTM D 4485 : 2020 | Standard Specification for Performance of Active API Service Category Engine Oils |
| ASTM E 950/E950M : 2009 : R2018 | Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference |
| ASTM G 174 : 2004 : R2017 | Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact |
| ASTM E 2283 : 2008 : R2019 | Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features |
| ASTM D 7363 : 2013 : REV A | Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 7468 : 2020 | Standard Test Method for Cummins ISM Test |
| ASTM C 648 : 2020 | Standard Test Method for Breaking Strength of Ceramic Tile |
| ASTM E 1927 : 1998 : R2018 | Standard Guide for Conducting Subjective Pavement Ride Quality Ratings |
| ASTM E 1401 : 2013 | Standard Practice for Use of a Dichromate Dosimetry System |
| ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM E 1845 : 2015 | Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth |
| ASTM D 3822/D3822M : 2014 : R2020 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 7234 : 2019 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 6205 : 2020 | Standard Practice for Calibration of the James Static Coefficient of Friction Machine |
| ASTM E 2340/E2340M : 2011 : R2021 | Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique |
| ASTM E 2891 : 2020 | Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications |
| ASTM C 802 : 2014 | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM E 1082 : 1990 : R2017 | Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness |
| ASTM D 7575 : 2011 : R2017 | Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination |
| ASTM D 1384 : 2005 : R2019 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM E 826 : 2014 | Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023) |
| ASTM D 6987/D6987M : 2013 : REV A | Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022) |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM D 5612 : 1994 : R2018 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
| ASTM E 1323 : 2015 : R2020 | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM E 274/E274M : 2015 : R2020 | Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire |
| ASTM E 2303 : 2015 | Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities |
| ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 7066 : 2004 : R2017 | Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination |
| ASTM E 965 : 2015 : R2019 | Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique |
| ASTM E 2653 : 2015 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM D 4691 : 2017 | Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry |
| ASTM E 1026 : 2015 | Standard Practice for Using the Fricke Dosimetry System |
| ASTM E 445/E445M : 2015 : R2019 | Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires |
| ASTM E 670 : 2009 : R2020 | Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter |
| ASTM D 2523/D2523M : 2013 : R2019 : EDT 1 | Standard Practice for Testing Load-Strain Properties of Roofing Membranes |
| ASTM D 4226 : 2019 : EDT 1 | Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
| ASTM E2972 : 2015(2019) | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM D 7549 : 2021 | Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure |
| ASTM G 16 : 2013 : R2019 | Standard Guide for Applying Statistics to Analysis of Corrosion Data |
| ASTM D 7907 : 2014 : R2019 | Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
| ASTM D 7216 : 2020 : REV A | Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers |
| ASTM D 4884/D4884M : 2014 : REV A | Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles |
| ASTM E 2341/E2341M : 2005 : R2019 | Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites |
| ASTM D 6543 : 2020 | Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers |
| ASTM E 3023 : 2021 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
| ASTM D 6299 : 2021 | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
| ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
| ASTM E 2380/E2380M : 2015 : R2019 | Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter |
| ASTM F 3299 : 2018 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf >5</inf> Sensor) |
| ASTM G 99 : 2017 | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
| ASTM D 689 : 2017 | Standard Test Method for Internal Tearing Resistance of Paper |
| ASTM E 3080 : 2019 | Standard Practice for Regression Analysis with a Single Predictor Variable |
| ASTM F 3211 : 2017 | Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
| ASTM D 3864 : 2012 : R2021 | Standard Guide for On-Line Monitoring Systems for Water Analysis |
| ASTM E 2489 : 2016 | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
| ASTM D 7778 : 2015 | Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1847 : 1996 : R2013 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022) |
| ASTM D 4495 : 2016 | Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM F 1249 : 2020 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM D 4863 : 2013 | Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022) |
| ASTM F 1572 : 2008 : R2015 | Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces |
| ASTM D 8044 : 2016 | Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures |
| ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM E 2586 : 2012 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 2586 : 2014 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2586 : 2010 : REV A | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2019 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2012 : REV A | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2007 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2016 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2019 : EDT 1 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2018 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2012 : REV B | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 2586 : 2010 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2586 : 2013 | Standard Practice for Calculating and Using Basic Statistics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.