ASTM E 1347 : 2006 : R2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
Hardcopy , PDF
11-11-2014
English
01-11-2011
CONTAINED IN VOL. 06.01, 2017 Defines the instrumental measurement of specimens resulting in color coordinates and color difference values by using a tristimulus colorimeter, also known as a tristimulus filter colorimeter or a color-difference meter.
Committee |
E 12
|
DevelopmentNote |
Supersedes ASTM E 97 (12/2001)
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed 2011
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This test method covers the instrumental measurement of specimens resulting in color coordinates and color difference values by using a tristimulus colorimeter, also known as a tristimulus filter colorimeter or a color-difference meter.
1.2 Provision is made in this test method for the measurement of color coordinates and color differences by reflected or transmitted light using either a hemispherical optical measuring system, such as an integrating sphere, or a bidirectional optical measuring system, such as annular, circumferential, or uniplanar 45:0 and 0:45 geometry.
1.3 Because of the limited absolute accuracy of tristimulus colorimeters, this test method specifies that, when color coordinates are required, the instrument be standardized by use of a standard having similar spectral (color) and geometric characteristics to those of the specimen. This standard is also known as a product standard. The use of a product standard of suitable stability is highly desirable.
1.4 Because tristimulus colorimeters do not provide any information about the reflectance or transmittance curves of the specimens, they cannot be used to gain any information about metamerism or paramerism.
1.5 Because of the inability of tristimulus (filter) colorimeters to detect metamerism or paramerism of specimens, this test method specifies that, when color differences are required, the two specimens must have similar spectral (color) and geometric characteristics. In this case, the instrument may be standardized for reflectance measurement by use of a white reflectance standard or, for transmittance measurement, with no specimen or standard at the specimen position.
1.6 This test method is generally suitable for any non-fluorescent, planar, object-color specimens of all gloss levels. Users must determine whether an instrument complying with this method yields results that are useful to evaluate and characterize retroreflective specimens, or specimens having optical structures.
1.7 This test method does not apply to the use of a spectrocolorimeter, which is a spectrometer that provides colorimetric data, but not the underlying spectral data. Measurement by using a spectrocolorimeter is covered in Practice E1164 and methods on color measurement by spectrophotometry.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
ASTM E 1477 : 1998 : REV A : R2017 : EDT 1 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
ASTM C 171 : 2016 | Standard Specification for Sheet Materials for Curing Concrete |
ASTM D 5548 : 2013 | Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) |
ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
ASTM D 4956 : 2019 | Standard Specification for Retroreflective Sheeting for Traffic Control |
ASTM D 2066 : 2007 : R2012 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
ASTM D 6290 : 2019 | Standard Test Method for Color Determination of Plastic Pellets |
ASTM D 4960 : 2008 : R2013 | Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials |
ASTM D 5382 : 2002 : R2017 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM D 7195 : 2016 : REV A | Standard Guide for Setting Object Color Specifications |
ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 3258 : 2004(R2019) | Standard Test Method for Porosity of White or Near White Paint Films by Staining |
ASTM D 868 : 2010 : R2015 | Standard Practice for Determination of Degree of Bleeding of Traffic Paint |
ASTM E 430 : 2011 | Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
ASTM D 5215 : 1993 : R2012 | Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM D 3424 : 2011 | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020) |
ASTM D 4397 : 2016 | Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM D 4587 : 2011 | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
ASTM F 2366 : 2012 | Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus (Withdrawn 2020) |
ASTM D 5150 : 1992 : R2017 | Standard Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 6441 : 2005 : R2016 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
ASTM D 2205 : 2015 | Standard Guide for Selection of Tests for Traffic Paints |
ASTM C 309 : 2011 | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
ASTM D 3450 : 2015 | Standard Test Method for Washability Properties of Interior Architectural Coatings |
ASTM D 6131 : 2017 | Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments |
ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 7073 : 2005 : R2012 | Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films |
ASTM D 6763 : 2016 | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
ASTM E 313 : 2015 : EDT 1 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
ASTM C 1315 : 2011 | Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete |
ASTM D 1746 : 2015 | Standard Test Method for Transparency of Plastic Sheeting |
ASTM D 4303 : 2010 : R2016 | Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials |
ASTM D 2457 : 2013 | Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics |
ASTM D 7489 : 2009 : R2017 | Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions |
ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM E 179 : 2017 : REDLINE | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.