ASTM E 1169 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conducting Ruggedness Tests
Hardcopy , PDF
18-08-2020
English
01-09-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice covers conducting ruggedness tests.
| Committee |
E 11
|
| DocumentType |
Standard Practice
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers conducting ruggedness tests. The purpose of a ruggedness test is to identify those factors that strongly influence the measurements provided by a specific test method and to estimate how closely those factors need to be controlled.
1.2This practice restricts itself to designs with two levels per factor. The designs require the simultaneous change of the levels of all of the factors, thus permitting the determination of the effects of each of the factors on the measured results.
1.3The system of units for this practice is not specified. Dimensional quantities in the practice are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 3098 : 2017 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
| ASTM D 3670 : 1991 : R2014 | Standard Guide for Determination of Precision and Bias of Methods of Committee D22 |
| ASTM G 156 : 2017 | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ASTM C 1067 : 2012 | Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
| ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 2653 : 2015 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM D 7778 : 2015 | Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1323 : 2015 | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM E 3097 : 2017 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
| ASTM F 2394 : 2007 : R2017 | Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024) |
| ASTM E 691 : 2018 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1325 : 2002 : R2008 | Standard Terminology Relating to Design of Experiments |
| ASTM E 1488 : 2009 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1325 : 2016 | Standard Terminology Relating to Design of Experiments |
| ASTM E 1488 : 2002 : EDT 1 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1325 : 1991 : R1997 | Standard Terminology Relating to Design of Experiments |
| ASTM F 2082 : 2003 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM E 2282 : 2013 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 1488 : 2008 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1325 : 2015 | Standard Terminology Relating to Design of Experiments |
| ASTM E 2282 : 2003 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM F 2082 : 2006 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery (Withdrawn 2015) |
| ASTM E 1488 : 1996 | Standard Guide for Statistical Procedures to Use in Developing and Applying ASTM Test Methods |
| ASTM E 1325 : 2002 | Standard Terminology Relating to Design of Experiments |
| ASTM E 1488 : 2008 : REV A | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 2282 : 2014 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM F 2082 : 2001 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
| ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1488 : 2012 : EDT 1 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 2282 : 2009 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM F 2082 : 2015 | Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.