ASTM E 11 : 2017 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
Available format(s)
PDF
Superseded date
05-08-2020
Superseded by
Language(s)
English
Published date
01-04-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 14.02, 2017 Describes the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves.
| Committee |
E 29
|
| DevelopmentNote |
Supersedes ASTM E 17. (03/2002) Supersedes RR S 366 (E). (09/2004)
|
| DocumentType |
Redline
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This document specifies the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves. This specification applies to test sieves manufactured with sieve cloth having a nominal aperture size ranging from 125 millimetres (mm) down to 20 micrometres (μm).
1.2Additional reference information can be found in Specifications E161, E323, E2016, and in Test Methods C430 and E2427.
1.3The values stated in SI units shall be considered standard for the dimensions of the sieve cloth openings and the wire diameters used in the sieve cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames, pans, and covers.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 24 : 2009 : R2013 | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials |
| SAE AMS 3044G : 2014 | MAGNETIC PARTICLES, FLUORESCENT, WET METHOD, DRY POWDER |
| ASTM D 2901 : 1999 | Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006) |
| ASTM D 3744 : 2003 | Standard Test Method for Aggregate Durability Index |
| ASTM D 4930 : 2006 : R2011 | Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
| ASTM D 409/D409M : 2016 : REDLINE | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method |
| ASTM F 106 : 2012 | Standard Specification for Brazing Filler Metals for Electron Devices |
| ASTM D 5158 : 1998 | Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM C 92 : 1995 | TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS |
| DIN 69176-2:1985-03 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; METHOD OF TEST OF MACROGRITS, GRIT P12 TO P220 |
| ASTM C 1120 : 1998 : R2002 | Standard Test Method for Wash Test of Asbestos |
| ASTM A 922 : 2005 : R2010 | Standard Specification for Silicon Metal |
| ASTM E 828 : 1981 : R2004 : EDT 1 | Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009) |
| ASTM E 956 : 1983 : R2015 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
| ASTM D 1155 : 2010 | Standard Test Method for Roundness of Glass Spheres |
| DOD-P-51455 Base Document:1979 | POTASSIUM CARBONATE, ANHYDROUS, TECHNICAL (METRIC) |
| MIL STD 1427 : A NOTICE 1 | ACTIVATED DESICCANTS (METRIC) |
| MIL-STD-1442 Revision A:1994 | INORGANIC PEROXIDES, TECHNICAL GRADE |
| MIL-C-0051096 Revision E:1983 | CORE MATERIAL, C18 |
| ASTM A 481 : 2005 : R2015 | Standard Specification for Chromium Metal |
| ASTM A 922 : 2005 : R2015 | Standard Specification for Silicon Metal |
| ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
| ASTM E 956 : 1983 : R2010 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
| CGSB 8.1 : 1988 | SIEVES, TESTING, WOVEN WIRE, INCH SERIES |
| ASTM E 102 : 1993 : R2003 : EDT 1 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
| ASTM D 3880 : 1990 : R2004 | Standard Test Method for Asbestos Strength Units |
| ASTM C 458 : 1998 : R2002 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM D 1514 : 2015 : REDLINE | Standard Test Method for Carbon Black—Sieve Residue |
| DIN 69101-2:1985-12 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR BONDED ABRASIVE PRODUCTS AND CHIP REMOVAL OPERATIONS WITH LOOSE ABRASIVE GRAINS; METHOD OF TEST OF MACROGRITS F4 TO F220 |
| ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM D 6913 : 2004 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| MIL-STD-1214 Revision A:1990 | ESTERS AND METAL ORGANICS, TECHNICAL GRADE |
| DOD STD 1445 : 1994-09-21 | METAL ORGANIC COMPOUNDS, TECHNICAL GRADE (METRIC) |
| ASTM D 422 : 1963 : R2002 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM C 92 : 1995 : R2005 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| API 10 : 1990 | SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS |
| ASTM D 4616 : 1995 : R2013 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| MIL L 12039 : D | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| ASTM C 472 : 1999 : R2014 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| DOD-D-51524 Base Document:1986 | DYE, DISPERSE BLUE 3 (METRIC) |
| MIL-STD-1203 Revision B:1991 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (ALUMINUM CHLORIDE THROUGH BORON NITRIDE) |
| ASTM D 6998 : 2011 : REDLINE | Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
| ASTM C 285 : 2010. | Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel |
| ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
| AWWA B503 : 2017 | SODIUM TRIPOLYPHOSPHATE |
| FM 2000 : 2018 | AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
| ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
| MIL-DTL-51027 Revision B:2010 | ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
| ASTM F 1377 : 2013 : REDLINE | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM D 7521 : 2016 : REDLINE | Standard Test Method for Determination of Asbestos in Soil |
| API 10A : 2011 | SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING |
| ASTM D 4026 : 2006 : R2012 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| TAPPI T 257 : 2014 | SAMPLING AND PREPARING WOOD FOR ANALYSIS |
| 16/30338304 DC : 0 | BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
| MIL-P-14536 Base Document:1957 | Polyisobutylene Binder |
| MIL-STD-1443 Revision A:1994 | INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS) |
| ASTM D 2868 : 2010 | Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather |
| MIL-STD-612 Revision C:1993 | INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) |
| MIL-STD-1209 Revision B:1993 | INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (STRONTIUM NITRATE THROUGH ZINC OXIDE) |
| API 56 : 1995 | RECOMMENDED PRACTICES FOR TESTING SAND USED IN HYDRAULIC FRACTURING OPERATIONS |
| ASTM C 329 : 1988 : R2006 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM D 6997 : 2012 : REDLINE | Standard Test Method for Distillation of Emulsified Asphalt |
| ASTM D 3997/D3997M : 2016 : REDLINE | Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light |
| ASTM C 190 : 1985 | Method of Test for Tensile Strength of Hydraulic Cement Mortars (Withdrawn 1990) |
| ASTM D 2860/D2860M : 2004 : R2010 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
| ASTM F 735 : 2017 : REDLINE | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM C 59/C59M : 2000 : R2006 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM D 1139/D1139M : 2015 : REDLINE | Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
| MIL-STD-605 Revision B:1994 | INORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
| ASTM D 5709 : 2009 | Standard Test Method for Sieve Analysis of Petroleum Coke |
| ASTM D 1632 : 2017 | Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
| MIL C 17605 : C | CHARCOAL, ACTIVATED, UNIMPREGNATED |
| ASTM C 136/C136M : 2014 : REDLINE | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM E 1757 : 2001 : R2007 | Standard Practice for Preparation of Biomass for Compositional Analysis |
| ASTM D 5493 : 2006 : R2016 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM E 161 : 2017 : REDLINE | Standard Specification for Electroformed Material and Test Sieves |
| AASHTO T 134 : 2005 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOIL-CEMENT MIXTURES |
| ASTM D 5080 : 2017 : REDLINE | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM C 1797 : 2017 : REDLINE | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| ASTM D 2764 : 1999 : R2015 : EDT 1 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 2638 : 2010 : R2015 : EDT 1 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM C 778 : 2017 : REDLINE | Standard Specification for Standard Sand |
| MIL-S-14374 Revision C:1983 | SILICA GEL, IRON FREE |
| ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM C 1121/C1121M : 2004 : R2009 : EDT 1 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| MIL-S-82858 Base Document:1986 | SILICONE DIOXIDE, MICROFINE |
| ASTM A 610 : 1979 : R2000 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| API 10A REDLINE : 2010 | SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING |
| ASTM C 135 : 1996 : R2015 | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM C 225 : 1985 : R2004 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM C 146 : 1994 : REV A : R2014 | Standard Test Methods for Chemical Analysis of Glass Sand |
| 04/30110128 DC : 0 | BS EN 14243 - POST-CONSUMER TYRE - MATERIALS AND APPLICATIONS |
| MIL-L-14519 Revision C:1978 | LIMESTONE, PULVERIZED |
| API 5A3 REDLINE : 2009 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| SAE J 444 : 2017 | CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING |
| API 60 : 1995 | RECOMMENDED PRACTICES FOR TESTING HIGH-STRENGTH PROPPANTS USED IN HYDRAULIC FRACTURING OPERATIONS |
| ASTM C 92 : 1995 : R2015 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| MIL-S-51078 Revision C:1984 | SODIUM HEXAMETAPHOSPHATE, TECHNICAL |
| ASTM E 726 : 2001 : R2011 : EDT 1 | Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides |
| ASTM C 492 : 1992 : R2008 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
| ASTM D 3802 : 2016 : REDLINE | Standard Test Method for Ball-Pan Hardness of Activated Carbon |
| SAE J 1830 : 2013 | SIZE CLASSIFICATION AND CHARACTERISTICS OF CERAMIC SHOT FOR PEENING |
| ASTM C 1090/C1090M : 2015 : REDLINE | Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
| ASTM D 6791 : 2011 : R2017 : EDT 1 | Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
| ASTM C 61/C61M : 2000 : R2015 | Standard Specification for Gypsum Keene's Cement |
| ASTM C 1093 : 2015-06 | PRACTICE FOR ACCREDITATION OF TESTING AGENCIES FOR MASONRY |
| ASTM C 1124/C1124M : 1990 : R2015 | Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021) |
| ASTM D 1278 : 1991 : REV A : R2015 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 269 : 1997 | Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
| ASTM C 574 : 1984 : R1988 | Method for Chemical Analyisis of Magnesite and Dolomite Refractories |
| I.S. EN ISO 17824:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
| ASTM A 481 : 2005 : R2010 | Standard Specification for Chromium Metal |
| ASTM C 441/C441M : 2017 : REDLINE | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
| ASTM E 1520 : 1999 | Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
| ASTM C 492 : 1992 : R1998 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| ASTM D 4253 : 2016 : REDLINE | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 6276 : 1999 : REV A | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 1301 : 1991 : R2014 | Standard Test Methods for Chemical Analysis of White Lead Pigments |
| ASTM D 4715 : 1998 : R2017 | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| ASTM D 4749 : 1987 : R2002 : EDT 1 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM D 7724 : 2011 | Standard Test Method for Carbon Black<char: emdash>Non-Dispersible Matter by Mechanical Flushing (NDM) |
| ASTM D 546 : 2017 : REDLINE | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM D 4326 : 2013 : REDLINE | Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence |
| ASTM D 269 : 1997 : R2006 | Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
| ASTM D 2977 : 2014 | Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
| ASTM D 7655/D7655M : 2012 : R2017 | Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems |
| AASHTO T 335 : 2009 | METHOD OF TEST FOR DETERMINING THE PERCENTAGE OF FRACTURE IN COARSE AGGREGATE |
| ASTM D 854 : 2014 : REDLINE | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 4072 : 1998 : R2003 : EDT 1 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| ASTM C 888 : 2003 : R2014 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder |
| ASTM C 786/C786M : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
| AASHTO M 43 : 2005 : R2013 | SPECIFICATION FOR SIZES OF AGGREGATE FOR ROAD AND BRIDGE CONSTRUCTION |
| ASTM F 1284 : 2009 : R2016 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM D 2589/D2589M : 1988 : R2011 : EDT 1 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM C 225 : 1985 : R2009 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM D 6934 : 2008 : R2016 | Standard Test Method for Residue by Evaporation of Emulsified Asphalt |
| ASTM D 441 : 2007 | Standard Test Method of Tumbler Test for Coal |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM F 106 : 2012 : R2017 | Standard Specification for Brazing Filler Metals for Electron Devices (Withdrawn 2024) |
| ASTM D 2752 : 1988 : R2002 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM D 7084 : 2004 : R2009 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM D 244 : 2009 | Standard Test Methods and Practices for Emulsified Asphalts |
| ASTM C 92 : 1995 : R1999 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM E 1520 : 1999 : R2004 | Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
| ASTM C 429 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
| ASTM D 1118 : 1995 : R2004 : EDT 2 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM E 323 : 2011 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM C 1120 : 1998 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 716 : 1986 : R2003 | Standard Test Methods for Evaluating Mica Pigment |
| ASTM D 1511 : 2012 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM F 1632 : 2003 : R2018 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM D 718 : 1986 : R1999 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
| ASTM A 132 : 2004 | Standard Specification for Ferromolybdenum |
| ASTM D 3280 : 1985 : R1999 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 6934 : 2008 | Standard Test Method for Residue by Evaporation of Emulsified Asphalt |
| ASTM B 851 : 2004 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM D 3977 : 1997 : R2002 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 2320 : 1998 : R2017 | Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| ASTM D 7280 : 2015 : REDLINE | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration |
| ASTM C 28/C28M : 2010 | Standard Specification for Gypsum Plasters |
| ASTM D 2947/D2947M : 1988 : R2011 : EDT 1 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 293 : 1993 : R2010 | Standard Test Method for the Sieve Analysis of Coke |
| ASTM A 610 : 1979 : R2004 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| ASTM D 7084:2004 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM C 92 : 1995 : R2010 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM C 374 : 2014 : R2018 | Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
| ASTM D 4570 : 2002 : R2007 | Standard Test Method for Rubber Chemicals<span class='unicode'>—</span>Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 1140 : 2017 : REDLINE | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 422 : 1963 : R1998 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM D 2332 : 2013 : REDLINE | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 6374 : 2012 | Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
| ASTM D 431 : 1984 | Method for Designating the Size of Coal from its Sieve Analysis (Withdrawn 1988) |
| ASTM D 2067 : 1997 : R2003 | Standard Test Method for Coarse Particles in Printing Ink Dispersions |
| ASTM D 4749 : 1987 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM D 4718/D4718M : 2015 : REDLINE | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 2320 : 1998 : R2003 | Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| ASTM E 2543 : 2008 : R2014 | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
| ASTM D 3280 : 1985 : R2009 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM C 374 : 2014 : R2015 : EDT 1 | Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
| ASTM D 5341 : 1999 : R2004 | Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM D 425 : 2017 : REDLINE | Standard Test Method for Centrifuge Moisture Equivalent of Soils |
| ASTM D 6926 : 2016 : REDLINE | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| ASTM C 323 : 1956 : R2011 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| ASTM D 2489 : 2002 | Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures |
| ISO 20279:2005 | Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry |
| ASTM D 269 : 1997 : R2002 | Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
| ASTM D 8038 : 2016 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM C 786 : 1996 | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods |
| ASTM D 716 : 1986 : R1999 | Standard Test Methods for Evaluating Mica Pigment |
| ASTM D 716 : 1986 : R2007 | Standard Test Methods for Evaluating Mica Pigment |
| ASTM E 1520 : 1999 : R2015 | Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
| ASTM C 641 : 2017 : REDLINE | Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates |
| ASTM D 2860/D2860M : 2004 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
| ASTM C 135 : 1996 : R2009 : EDT 1 | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM C 1152/C1152M : 2004 : R2012 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM D 1283 : 2005 | Standard Test Method for Alkali-Soluability of Wools |
| ASTM D 1865/D1865M : 2009 | Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs |
| ASTM A 601/A601M : 2010 : R2015 | Standard Specification for Electrolytic Manganese Metal |
| ASTM C 1121 : 2004 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM D 1370 : 2000 | Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
| ASTM D 4715 : 1998 : R2008 : EDT 1 | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| ASTM D 421 : 1985 : R2007 | Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016) |
| ASTM D 6928 : 2017 : REDLINE | Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
| ASTM C 325 : 2007 : R2014 | Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays |
| ASTM E 324 : 2016 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
| ASTM D 5030 : 2004 | Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| BS EN ISO 13500 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| DIN EN ISO 7711-3:2005-02 | Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
| DIN EN ISO 20568-2:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| DEFSTAN 68-279/1(1996) : 1996 | EXAMINATION OF ACTIVATED CARBON: TYPES 1101, 1121 AND 1142 |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| O-F-371 Revision B:1979 | FIRE EXTINGUISHING AGENT, SODIUM BICARBONATE, DRY CHEMICAL |
| ASHRAE 145.1 : 2015 | LABORATORY TEST METHOD FOR ASSESSING THE PERFORMANCE OF GAS-PHASE AIR-CLEANING SYSTEMS: LOOSE GRANULAR MEDIA |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| NBR 15664-9 : 2001 ERRATA 2011 | ORTHOPEDIC IMPLANTS - PRODUCT COATING - PART 9: SPECIFICATIONS FOR UNALLOYED TITANIUM AND TITANIUM 6-ALUMINIUN 4-VANADIUM ALLOY POWDERS |
| ASTM D 6276 : 1999 : REV A : R2006 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM C 61/C61M : 2000 : R2006 | Standard Specification for Gypsum Keene's Cement |
| ASTM D 421 : 1985 : R2002 | Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
| ASTM D 2947 : 1988 : R2002 : EDT 1 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 4931 : 2006 : R2011 | Standard Test Method for Gross Moisture in Green Petroleum Coke |
| 08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
| ASTM D 4072 : 1998 : R2008 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| WW-L-2887 Base Document:1998 | TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS |
| ASTM D 4026 : 2006 : R2017 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| ASTM D 718 : 1986 : R2003 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ASTM D 2764 : 1999 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM C 1335 : 2012 : R2017 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| AASHTO T 30 : 2015 | METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE |
| ASTM D 5539 : 2014 : REDLINE | SPECIFICATION FOR SEED STARTER MIX |
| ASTM C 458/C458M : 1998 : R2011 : EDT 1 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| MIL-STD-1206 Revision B:1993 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE (METRIC) |
| MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
| ASTM E 1071 : 1985 : R1989 : EDT 1 | Test Method for Determination of Reducibility of Iron Ores (Withdrawn 1995) |
| ASTM C 35 : 2001 : R2005 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 448 : 2012 : R2017 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM D 1914 : 1995 : R2014 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM C 980 : 2017 : REDLINE | Standard Specification for Industrial Chimney Lining Brick |
| MIL-DTL-512 Revision C:2001 | Aluminum Powder, Flaked, Grained, and Atomized |
| MIL-STD-613 Base Document:1986 | INORGANIC BASES AND BASIC ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)(METRIC) |
| MIL-P-50002 Revision B:1981 | PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
| ASTM C 492 : 1992 : R2017 : EDT 1 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| I.S. EN ISO 10426-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION (ISO 10426-1:2009) |
| ASTM A 482 : 2005 : R2010 | Standard Specification for Ferrochrome-Silicon |
| ASTM C 472 : 1999 : R2009 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| ASTM C 342 : 1997 | Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations (Withdrawn 2001) |
| ASTM C 403/C403M : 2016 : REDLINE | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| MIL-A-82667 Revision A:1978 | AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR |
| MIL-P-62426 Base Document:1991 | POWDER, CHROMIUM CARBIDE - NICKEL CHROMIUM ALLOY (METRIC) |
| MIL-S-15191 Revision C:1986 | SILICA, DIATOMACEOUS, UNCALCINED |
| API 7A1 : 1992 | RECOMMENDED PRACTICE FOR TESTING OF THREAD COMPOUND FOR ROTARY SHOULDERED CONNECTIONS |
| ASTM A 482/A482M : 2011 | Standard Specification for Ferrochrome-Silicon |
| 07/30147011 DC : 0 | BS EN ISO 13678 - PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
| ASTM D 88 : 2007 : R2013 | Standard Test Method for Saybolt Viscosity |
| ASTM D 3977 : 1997 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| AASHTO T 210 : 2015 | METHOD OF TEST FOR AGGREGATE DURABILITY INDEX |
| ASTM D 934 : 2013 : REDLINE | Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022) |
| ASTM D 185 : 2007 : R2012 | Standard Test Methods for Coarse Particles in Pigments |
| 07/30148827 DC : 0 | BS EN ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| MIL D 12468 : C NOTICE 1 | DECONTAMINATING AGENT, STB |
| ASTM A 99 : 2003 : R2014 | Standard Specification for Ferromanganese |
| ASTM D 4607 : 2014 : REDLINE | Standard Test Method for Determination of Iodine Number of Activated Carbon |
| ASTM D 5600 : 2017 : REDLINE | Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM A 483 : 2004 : R2009 | Standard Specification for Silicomanganese |
| ASTM D 440 : 2007 | Standard Test Method of Drop Shatter Test for Coal |
| DOD D 51485 : A | DYE, SOLVENT YELLOW 33 (METRIC) |
| ASTM C 750 : 2009 : R2014 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
| ASTM E 1757 : 2001 | Standard Practice for Preparation of Biomass for Compositional Analysis |
| LLL-R-626 Revision D:1984 | ROSINS: GUM, WOOD, AND TALL OIL |
| ASTM D 4644 : 2016 : REDLINE | Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
| O-A-429 Revision D:1984 | ALUMINUM SULFATE, TECHNICAL |
| BS ISO 17824 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| MIL-STD-3033 Base Document:2010 | PARTICLE/SAND EROSION TESTING OF ROTOR BLADE PROTECTIVE MATERIALS |
| BS EN ISO 28460:2010 | Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations |
| MIL-DTL-11309 Revision J:2007 | DISINFECTANT, FOOD SERVICE |
| ASTM D 5821 : 2013 : R2017 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 6647 : 2001 : R2006 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM D 658 : 1991 | Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996) |
| ASTM F 2107 : 2008 : R2015 | Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
| ASTM F 2107 : 2008 | Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
| DEFSTAN 68-133/2(1992) : INTERIM | CARBON, ACTIVATED, IMPREGNATED ASC/TEDA, TYPE 1101 |
| ASTM C 493 : 1998 | Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement (Withdrawn 2002) |
| 03/113392 DC : DRAFT SEP 2003 | BS EN ISO 7711-3 - DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3 - GRIT SIZES, DESIGNATION AND COLOUR CODE |
| DOD-M-64040 Revision A:1986 | METHYL DIPHENYLUREA |
| ASTM D 4315 : 1994 : R2012 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM C 1121/C1121M : 2004 : R2015 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021) |
| MIL-PRF-12039 Revision D:1990 | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| ASTM C 332 : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Insulating Concrete |
| ASTM D 4616 : 1995 : R2008 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| ASTM D 5106 : 2015 : REDLINE | Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
| ASTM D 4513 : 2011 : R2017 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
| MIL-C-324 Revision C:1983 | CALCIUM SILICIDE, TECHNICAL |
| ASTM C 1120/C1120M : 1998 : R2011 : EDT 1 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 6376 : 2010 : R2017 : EDT 1 | Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy |
| MIL-D-3718 Revision C:1986 | DYE MIX, DISPERSE RED 9 - DEXTRIN (METRIC) |
| ASTM D 451 : 1991 : R2002 | Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products |
| ASTM D 2014 : 1997 | Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven |
| API 19C : 2008 : R2016 | MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| ASTM D 3397 : 1981 | Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987) |
| ASTM D 5341 : 1999 | Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM D 5449/D5449M : 2016 : REDLINE | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 4931 : 2006 : R2017 | Standard Test Method for Gross Moisture in Green Petroleum Coke |
| ASTM D 3280 : 1985 : R2004e1 | TEST METHODS FOR ANALYSIS OF WHITE ZINC PIGMENTS |
| ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM A 483/A483M : 2010 : R2015 | Standard Specification for Silicomanganese |
| CSA N288.3.2 : 1985 | HIGH EFFICIENCY AIR CLEANING ASSEMBLIES FOR NORMAL OPERATION OF NUCLEAR FACILITIES |
| ASTM C 371 : 2009 : R2014 | Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders |
| ASTM E 1757 : 2001 : R2015 | Standard Practice for Preparation of Biomass for Compositional Analysis |
| AWWA C602 : 2017 | CEMENT-MORTAR LINING OF WATER PIPELINES IN PLACE - 4 INCH (100 MM) AND LARGER |
| AWWA B603 : 2016 | PERMANGANATES |
| AWWA B701 : 2011 | SODIUM FLUORIDE |
| AWWA B600 : 2016 | POWDERED ACTIVATED CARBON |
| FM 2030 : 2009 | RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
| ASTM D 345 : 2002 : R2010 | Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019) |
| AASHTO T 136 : 2013 | METHOD OF TEST FOR FREEZING-AND-THAWING TESTS OF COMPACTED SOIL-CEMENT MIXTURES |
| AASHTO T 197M/T 197 : 1900 | METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| ASTM D 4373 : 2014 : REDLINE | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D 2331 : 2008 | Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits |
| ASTM D 1135 : 1986 : R2014 | Standard Test Methods for Chemical Analysis of Blue Pigments |
| ASTM D 452 : 1991 : R2008 | Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
| ASTM C 357 : 2007 | Standard Test Method for Bulk Density of Granular Refractory Materials |
| ASTM C 566 : 2013 : REDLINE | TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
| ASTM C 225 : 1985 : R1999 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM E 389 : 2013 : REDLINE | Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials |
| AASHTO T 327 : 2012 | METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS |
| AASHTO T 245 : 2015 | METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS |
| AASHTO R 58 : 2011 | PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST |
| ASTM D 4715 : 1998 : R2012 | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| ASTM D 6913 : 2004 : R2009 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| AASHTO T 72 : 2010 : R2015 | METHOD OF TEST FOR SAYBOLT VISCOSITY |
| AASHTO T 72 : 2010 | METHOD OF TEST FOR SAYBOLT VISCOSITY |
| AASHTO T 180 : 2015 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 4.54-KG (10-LB) RAMMER AND A 457-MM (18-IN.) DROP |
| ASTM D 4944 : 2018 : REDLINE | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM D 4718 : 1987 : R2001 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM E 956 : 1983 : R1999 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
| ASTM D 1914 : 1995 : R1999 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres |
| ASTM A 601 : 2005 : R2010 | Standard Specification for Electrolytic Manganese Metal |
| ASTM D 5493 : 2006 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 7084 : 2004 : R2017 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM D 4646 : 2016 : REDLINE | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM C 1524 :2002 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM D 1241 : 2015 : REDLINE | Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses |
| ASTM A 483/A483M : 2010 | Standard Specification for Silicomanganese |
| ASTM D 2862 : 2016 : REDLINE | Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
| ASTM D 2861 : 1987 : R2009 | Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ASTM D 4718 : 1987 : R2007 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 2772 : 1990 : R1997 : EDT 1 | Standard Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide (Withdrawn 2003) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM E 828 : 1981 : R1997 | Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
| ASTM D 345 : 2002 | Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications |
| ASTM D 1883 : 2016 : REDLINE | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 7486 : 2014 : REDLINE | Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis |
| ASTM C 329 : 1988 : R2016 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM C 1137 : 2005 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
| ASTM D 2416 : 1984 : R2009 | Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM A 835/A835M : 2010 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| ASTM D 4072 : 1998 : R2018 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| ASTM D 422 : 1963 : R2007 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM D 1155 : 2010 : R2015 | Standard Test Method for Roundness of Glass Spheres |
| ASTM D 1301 : 1991 : R2008 | Standard Test Methods for Chemical Analysis of White Lead Pigments |
| ASTM D 4421 : 1994 : R1999 | Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004) |
| ASTM C 1065 : 2008 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
| ASTM D 2764 : 1999 : R2009 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM D 7724 : 2011 : R2016 | Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
| ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
| ASTM C 706 : 2013 : REDLINE | Standard Specification for Limestone for Animal Feed Use |
| ASTM B 851 : 2004 : R2009 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM D 88 : 2007 | Standard Test Method for Saybolt Viscosity |
| ASTM C 35 : 2001 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 1511 : 2012 : R2017 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM C 1524 : 2002 : REV A | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM D 4350 : 2016 : REDLINE | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM C 183/C183M : 2016 : REDLINE | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM D 5294 : 1992 | Standard Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1997 |
| ASTM D 1118/D1118M : 1995 : R2017 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles (Withdrawn 2022) |
| I.S. EN ISO 20568-2:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ASTM D 126 : 1987 : R2006 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| ASTM D 126 : 1987 : R2012 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM C 1121 : 2004 : EDT 1 | Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM D 50 : 1990 : R2005 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM D 5581 : 2007 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM D 2416 : 1984 : R1999 | Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| ASTM D 2067 : 1997 : R2013 | Standard Test Method for Coarse Particles in Printing Ink Dispersions |
| ASTM D 7454 : 2014-05 | TEST METHOD FOR DETERMINATION OF VIBRATED BULK DENSITY OF CALCINED PETROLEUM COKE USING A SEMI-AUTOMATED APPARATUS |
| ASTM C 781 : 2008 | Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components |
| ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 5341 : 1999 : R2010 : EDT 1 | Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM D 1370/D1370M : 2012 : R2016 | Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
| ASTM C 458 : 1998 : R2006 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM C 61/C61M : 2000 | Standard Specification for Gypsum Keene's Cement |
| ASTM C 1124/C1124M : 1990 : R2009 : EDT 1 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM C 279 : 2017 : REDLINE | Standard Specification for Chemical-Resistant Masonry Units |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ISO 13503-2:2006 | Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations |
| ISO 13678:2010 | Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
| BS EN ISO 13501:2011 | Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation |
| CSA B366.1 :2011 : INC : UPD 1 : 2014 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| CSA B366.1 : 2011 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| I.S. EN ISO 13500:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| I.S. EN ISO 13501:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| UNI EN ISO 13501 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASTM D 5268 : 2013 : REDLINE | Standard Specification for Topsoil Used for Landscaping Purposes |
| DIN EN ISO 28460:2011-04 | Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010) |
| ASTM C 1120 : 1998 : R2002 : EDT 1 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 4930 : 2006 | Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
| ASTM D 5709 : 2009 : R2015 | Standard Test Method for Sieve Analysis of Petroleum Coke |
| ASTM C 458 : 1998 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM D 4892 : 2014 : REDLINE | TEST METHOD FOR DENSITY OF SOLID PITCH (HELIUM PYCNOMETER METHOD) |
| ASTM F 1877 : 2016 : REDLINE | Standard Practice for Characterization of Particles |
| ASTM D 293 : 1993 : R1999 | Standard Test Method for the Sieve Analysis of Coke |
| ASTM D 4616 : 1995 : R2005 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| ASTM D 197 : 1987 : R2007 | Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
| ASTM D 6791 : 2011 | Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
| ASTM A 99 : 2003 : R2009 | Standard Specification for Ferromanganese |
| ASTM D 4254 : 2016 : REDLINE | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 1704M : 1995 | Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filtered Sample (Metric) (Withdrawn 1998) |
| O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
| ASTM D 452 : 1991 : R2002 | Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
| API 13A : 2010 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 3466 : 2006 : R2011 | Standard Test Method for Ignition Temperature of Granular Activated Carbon |
| ASTM C 135 : 1996 : R2003 | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM C 329 : 1988 : R2011 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| ASTM D 1997 : 2013 : REDLINE | Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
| ISO 10426-1:2009 | Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification |
| ASTM C 573 : 1981 : R1990 | Methods for Chemical Analysis of Fireclay and High-Alumina Refractories |
| ASTM D 502 : 1989 : R2009 | Standard Test Method for Particle Size of Soaps and Other Detergents |
| ASTM A 100 : 2007 : R2012 | Standard Specification for Ferrosilicon |
| ASTM B 851 : 2004 : R2014 | Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
| ASTM D 1278 : 1991 : REV A : R2011 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| DIN 69176-1:1985-03 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; DESIGNATION, GRAIN SIZE DISTRIBUTION |
| MIL-C-768 Revision A:1990 | COPPER, POWDERED (FOR USE IN AMMUNITION) (METRIC) |
| MIL F 82795 : NOTICE 1 | FLOATS, PULP, ASBESTOS |
| MIL-DTL-150 Revision E:2008 | POTASSIUM CHLORATE, TECHNICAL |
| ASTM D 1278 : 1991 : REV A : R2002 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM E 276 : 2013 : REDLINE | Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials |
| ASTM D 4749 : 1987 : R2007 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| UFC 3-250-03 : 2001 | UNIFIED FACILITIES CRITERIA - STANDARD PRACTICE MANUAL FOR FLEXIBLE PAVEMENTS |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| ASTM D 5159 : 2004 | Standard Guide for Dusting Attrition of Granular Activated Carbon |
| ASTM A 100 : 2007 : R2018 | Standard Specification for Ferrosilicon |
| ASTM D 4829 : 2011 : REDLINE | Standard Test Method for Expansion Index of Soils |
| ASTM D 2067 :1997 | Standard Test Method for Coarse Particles in Printing Ink Dispersions |
| ASTM D 4616 : 1995 : R2000 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| 04/19987313 DC : DRAFT DEC 2004 | BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| ASTM D 4312 : 2015 : REDLINE | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method) |
| ASTM D 6913/D6913M : 2017 : REDLINE | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM E 2316 : 2014 : REDLINE | Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides |
| ASTM D 2947 : 1988 : R2006 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 2489/D2489M : 2016 : REDLINE | Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures |
| ASTM D 7928 : 2017 : REDLINE | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
| ASTM A 99 : 2003 | Standard Specification for Ferromanganese |
| ASTM C 1065 : 2008 : R2015 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
| ASTM D 6572 : 2014-02 | TEST METHODS FOR DETERMINING DISPERSIVE CHARACTERISTICS OF CLAYEY SOILS BY THE CRUMB TEST |
| ASTM C 323 : 1956 : R2016 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays (Withdrawn 2024) |
| ASTM D 2318 : 2015 : REDLINE | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| ASTM D 1863/D1863M : 2005 : R2011 : EDT 1 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| MIL P 211 : E | PHOSPHORUS, RED, TECHNICAL |
| MIL-S-14022 Revision A:1983 | SODIUM PERBORATE, TETRAHYDRATE |
| MIL-P-62423 Base Document:1982 | POWDER, POLYESTER-ALUMINUM (METRIC) |
| ASTM D 126 : 1987 : R2019 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| ASTM D 126 : 1987 : R2002 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| ASTM D 8106 : 2017 | Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
| ASTM D 1508 : 2012 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM C 59/C59M : 2000 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| MIL-P-83348 Revision A:1983 | POWDER, PLASMA SPRAY |
| MIL-P-85856 Base Document:1988 | POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR |
| ASTM D 1665 : 1998 : R2009 | Standard Test Method for Engler Specific Viscosity of Tar Products |
| ASTM C 1120 : 1998 : R2006 | Standard Test Method for Wash Test of Asbestos |
| ASTM D 3155 : 2011 : REDLINE | Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
| ASTM C 325 : 2007 | Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays |
| ASTM D 3038 : 1993 : R1999 | Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 2416 : 1984 : R2015 : EDT 1 | Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| ASTM D 6936 : 2017 : REDLINE | Standard Test Method for Determining Demulsibility of Emulsified Asphalt |
| MIL-P-62424 Base Document:1982 | POWDER, YTTRIUM, ALUMINUM, NICKEL-CHROMIUM (METRIC) |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL |
| ASTM C 35 : 2001 : R2014 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| UNI EN ISO 28460 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS |
| ASTM C 374 : 2014 | Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
| MIL-L-16355 Revision E:1993 | LEAD STYPHNATE, BASIC |
| MIL-DTL-757 Revision C:2012 | Lead Styphnate, Normal |
| SAE J 3020 : 2014 | MEDICAL DEVICE SHOT PEENING |
| AASHTO T 220 : 2006 | METHOD OF TEST FOR DETERMINATION OF THE STRENGTH OF SOIL-LIME MIXTURES |
| ASTM C 1843 : 2016 | Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate |
| ASTM D 718 : 1986 : R2014 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
| ASTM C 535 : 2016 : REDLINE | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 1556/D1556M : 2015-03 | TEST METHOD FOR DENSITY AND UNIT WEIGHT OF SOIL IN PLACE BY SAND-CONE METHOD |
| ASTM D 2014 : 1997 : R2010 | Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven |
| ASTM D 1664 : 1980 : R1985 | Test Method for Coating and Stripping of Bitumen-Aggregate Mixtures (Withdrawn 1992) |
| ASTM D 3880/D3880M : 1990 : R2009 : EDT 1 | Standard Test Method for Asbestos Strength Units |
| ASTM D 244 : 2009 : R2017 | Standard Test Methods and Practices for Emulsified Asphalts |
| API 13A : 2010 : INC : ERR 1 : 2014 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| AWWA B506 : 2013 | ZINC ORTHOPHOSPHATE |
| ASTM D 3977 : 1997 : R2007 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 4914/D4914M : 2016 : REDLINE | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM D 2416 : 1984 : R2004 | Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| ASTM D 6276 : 1999 : REV A : R2006 : EDT 1 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization (Withdrawn 2015) |
| ASTM A 610 : 1979 : R2014 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| ACI 364.3R : 2009 | GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET |
| ASTM C 1318 : 2015-06 | TEST METHOD FOR DETERMINATION OF TOTAL NEUTRALIZING CAPABILITY AND DISSOLVED CALCIUM AND MAGNESIUM OXIDE IN LIME FOR FLUE GAS DESULFURIZATION (FGD) |
| ASTM D 5581 : 2007 : REV A : EDT 1 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM D 502 : 1989 : R1995 : EDT 1 | Standard Test Method for Particle Size of Soaps and Other Detergents |
| ASTM D 716 : 1986 : R2019 | Standard Test Methods for Evaluating Mica Pigment |
| ASTM D 3639 : 1992 : R2002 : EDT 2 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| AASHTO T 113 : 2015 | METHOD OF TEST FOR LIGHTWEIGHT PIECES IN AGGREGATE |
| AASHTO T 104 : 1999 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| AASHTO T 195 : 2011 | METHOD OF TEST FOR DETERMINING DEGREE OF PARTICLE COATING OF ASPHALT MIXTURES |
| ASTM D 287 : 1992 : R2006 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| AASHTO T 288 : 2012 | METHOD OF TEST FOR DETERMINING MINIMUM LABORATORY SOIL RESISTIVITY |
| AASHTO T 112 : 2000 | METHOD OF TEST FOR CLAY LUMPS AND FRIABLE PARTICLES IN AGGREGATE |
| AASHTO T 255 : 2000 | METHOD OF TEST FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
| AASHTO R 58 : 2011 : R2015 | PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST |
| ASTM D 3282 : 2015 : REDLINE | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
| AASHTO T 85 : 2014 | STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE |
| AASHTO T 103 : 2008 | METHOD OF TEST FOR SOUNDNESS OF AGGREGATES BY FREEZING AND THAWING |
| AASHTO T 303 : 2000 | METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION |
| AASHTO T 19M/T 19 : 1900 | METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
| AASHTO T 190 : 2014 | METHOD OF TEST FOR RESISTANCE R-VALUE AND EXPANSION PRESSURE OF COMPACTED SOILS |
| AASHTO T 37 : 2007 : R2011 | METHOD OF TEST FOR SIEVE ANALYSIS OF MINERAL FILLER FOR HOT MIX ASPHALT (HMA) |
| AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
| ASTM C 61/C61M : 2000 : R2011 | Standard Specification for Gypsum Keene's Cement |
| ASTM D 197 : 1987 : R1994 : EDT 1 | Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
| ASTM A 482 : 2005 | Standard Specification for Ferrochrome-Silicon |
| ASTM A 482/A482M : 2011 : R2016 | Standard Specification for Ferrochrome-Silicon |
| ASTM C 142 : 1997 | Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C 1260 : 2014 : REDLINE | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| ASTM E 728 : 1991 : R2009 | Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides |
| ASTM D 451/D451M : 2017 : REDLINE | Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products |
| ASTM D 1135 : 1986 : R2009 | Standard Test Methods for Chemical Analysis of Blue Pigments |
| ASTM E 726 : 2001 : R2006 | Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides |
| ASTM F 1632 : 2003 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM D 558 : 2011 : REDLINE | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| ASTM F 1128 : 1988 | Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996) |
| ASTM D 3280 : 1985 : R2004 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM D 452 : 1991 : R1997 : EDT 1 | Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
| ASTM D 5976 : 2000 | Standard Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005) |
| ASTM D 2752 : 1988 : R2006 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM D 5581 : 2007 : REV A : R2013 | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM E 2542 : 2008 : R2014 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| ASTM D 6376 : 2010 | Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy |
| ASTM D 1508 : 2012 : R2017 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM C 784 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
| ASTM C 1761/C1761M : 2017 : REDLINE | Standard Specification for Lightweight Aggregate for Internal Curing of Concrete |
| ASTM C 999 : 2017 : REDLINE | Standard Practice for Soil Sample Preparation for the Determination of Radionuclides |
| ASTM C 59/C59M : 2000 : R2015 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM D 4715 : 1998 | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| ASTM C 59/C59M : 2000 : R2011 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM D 2764 : 1999 : R2004 : EDT 1 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| ASTM C 1335:2012 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| ASTM F 3187 : 2016 | Standard Guide for Directed Energy Deposition of Metals |
| ASTM D 1118 : 1995 : R2004 : EDT 1 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 6913 : 2004 : R2009 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM F 3012 : 2014 | Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment |
| ASTM E 20 : 1985 | Practice for Particle Size Analysis of Particulate Substances in the Range of 0.2 to 75 UM by Optical Microscopy (Withdrawn 1994) |
| ASTM D 2589 : 1988 : R2006 : EDT 1 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 1742 : 2006 : R2013 | Standard Test Method for Oil Separation from Lubricating Grease During Storage |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 502 : 1989 : R2016 | Standard Test Method for Particle Size of Soaps and Other Detergents |
| ASTM D 2320 : 1998 : R2008 | Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| ASTM C 186 : 2017 : REDLINE | Standard Test Method for Heat of Hydration of Hydraulic Cement |
| ASTM D 3042 : 2017 : REDLINE | Standard Test Method for Insoluble Residue in Carbonate Aggregates |
| ASTM D 3639 : 1992 : R2002 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM E 323 : 2011 : R2016 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM C 1152/C1152M:2004 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 371 : 2009 | Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders |
| ASTM D 3280 : 1985 : R2004 : EDT 1 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM B 214 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Metal Powders |
| ASTM A 601 : 2005 | Standard Specification for Electrolytic Manganese Metal |
| ASTM D 1118 : 1995 : R1999 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 7560 : 2016 | Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
| ASTM D 3880/D3880M : 1990 : R2017 | Standard Test Method for Asbestos Strength Units (Withdrawn 2022) |
| ASTM D 3977 : 1997 : R2013 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| ASTM D 3402/D3402M : 2016 : REDLINE | Standard Test Method for Tumbler Test for Coke |
| ASTM E 956 : 1983 : R2005 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
| ASTM E 726 : 2001 : R2015 | Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides |
| ASTM C 1176/C1176M : 2013 : REDLINE | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ASTM C 157/C157M : 2017 : REDLINE | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 7711-3:2004 | Dentistry Diamond rotary instruments Part 3: Grit sizes, designation and colour code |
| CSA C22.2 No. 145 : 2011 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| CSA B366.1 : 2011 : R2015 | SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
| CSA C22.2 No. 145 : 2011 : R2015 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| ASTM F 2363/F2363M : 2017 : REDLINE | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
| UNI EN ISO 13500 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| UNI EN ISO 13503-2 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 2: MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS |
| UNI EN ISO 13678 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
| UNI EN ISO 10426-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ASTM D 2638 : 2010 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM E 2543 : 2008 | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
| ASTM D 1748 : 2010 : R2015 | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ASTM D 5444 : 2015 : REDLINE | Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 5159 : 2004 : R2009 | Standard Guide for Dusting Attrition of Granular Activated Carbon |
| AASHTO T 11 : 2005 : R2013 | METHOD OF TEST FOR MATERIALS FINER THAN 75-[MU]M (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING |
| SAE J 997 : 2013 | SPARK ARRESTER TEST CARBON |
| ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
| AWWA C104/A21.4 : 2016 | CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE |
| ASTM E 1072 : 1985 : R1989 : EDT 1 | Test Method for Low Temperature Breakdown of Iron Ores |
| ASTM D 4315 : 1994 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 6935 : 2017 : REDLINE | Standard Test Method for Determining Cement Mixing of Emulsified Asphalt |
| ASTM C 331/C331M : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM E 2814 : 2011 | Standard Guide for Industrial Woven Wire Filter Cloth |
| MIL-T-7099 Revision E:1979 | TERMINAL, LUG AND SPLICE, CRIMP STYLE ALUMINUM FOR ALUMINUM AIRCRAFT WIRE |
| ASTM D 7428 : 2015 : REDLINE | Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
| AASHTO T 290 : 1995 | METHOD OF TEST FOR DETERMINING WATER-SOLUBLE SULFATE ION CONTENT IN SOIL |
| MIL-DTL-12468 Revision E:2009 | Decontaminating Agent, STB |
| MIL-S-23923 Revision D:1984 | SPRAYER AND DUSTER UNITS, INSECTICIDE, MIST DUST BLOWER TYPE, GED, 30 TO 100 GAL/H LIQUID, 30 TO 300 LB/H DUST (COMMERCIAL) |
| ASTM F 1632 : 2003 : R2010 | Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
| ASTM D 5004 : 2011 | Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
| SAE AMS 2430 : 2015 | SHOT PEENING |
| AWWA B403 : 2016 | ALUMINUM SULFATE - LIQUID, GROUND, OR LUMP |
| MIL-DTL-440 Revision D:2015 | Composition A-3 and A-4 |
| QQ-B-650 Revision C:1987 | BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS |
| ASTM D 4616 : 1995 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| ASTM D 5514 : 2006 | Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| API 13J SPANISH : 1996 | PRUEBAS CON SALMUERAS PESADAS |
| CSA Z201 : 0 | QUALIFICATION CODE FOR ONTARIO FOR LABORATORIES ANALYZING INDUSTRIAL WASTE |
| ASTM C 831 : 2018 : REDLINE | Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes |
| MIL B 003473 : A | BEAD, LABORATORY, GLASS |
| ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM C 1218/C1218M : 2017 : REDLINE | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| MIL-C-14264 Revision A:1978 | CALCIUM PHOSPHATE, TRIBASIC, TECHNICAL |
| ASTM D 1739 : 1998 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM E 102/E102M : 1993 : R2009 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
| ASTM D 806 : 2011 : REDLINE | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM D 5711 : 2003 | Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012) |
| SS-P-821 Revision C:1989 | PUMICE, GROUND, ABRASIVE |
| ASTM D 410 : 1984 | Method of Sieve Analysis of Coal (Withdrawn 1988) |
| ASTM D 480 : 1988 : R2014 | Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| ASTM A 132 : 2004 : R2014 | Standard Specification for Ferromolybdenum |
| API 19C:2008 | MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS |
| ASTM D 2067 : 1997 : R2008 | Standard Test Method for Coarse Particles in Printing Ink Dispersions |
| ASTM D 5158 : 1998 : R2005 | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM C 571 : 1981 : R1990 | Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories |
| ASTM D 3466 : 2006 | Standard Test Method for Ignition Temperature of Granular Activated Carbon |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| BS EN ISO 13678:2012 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
| 04/30124757 DC : DRAFT NOV 2004 | ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
| DIN ISO 20279:2006-01 | Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005) |
| MIL-DTL-23919 Revision C:2012 | REFERENCE CELL, IMPRESSED CURRENT CATHODIC PROTECTION (ICCP) - SILVER-SILVER CHLORIDE |
| MIL-A-82667-2 Base Document:1977 | AMMONIUM PERCHLORATE, CONDITIONED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM D 1739 : 1998 : R2004 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM D 4315 : 1994 : R2001 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| ASTM D 269 : 1997 : R2015 | Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
| UFC 3-260-17 : 2004 | UNIFIED FACILITIES CRITERIA - DUST CONTROL FOR ROADS, AIRFIELDS AND ADJACENT AREAS |
| ASTM D 3977 : 1997 : R2013 : EDT 1 | Standard Test Methods for Determining Sediment Concentration in Water Samples |
| AWWA B405 : 2016 | SODIUM ALUMINATE |
| MIL-STD-621 Revision A:1964 | TEST METHODS FOR PAVEMENT SUBGRADE, SUBBASE, AND BASE COURSE MATERIAL |
| ASTM C 458 : 1998 : R2002 : EDT 1 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM A 550 : 2016 : REDLINE | Standard Specification for Ferrocolumbium (Ferroniobium) |
| BS EN ISO 17824:2014 | Petroleum and natural gas industries. Downhole equipment. Sand screens |
| BS ISO 13501 : 2005 AMD 16886 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| 10/30219716 DC : 0 | BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| O-O-690 Revision C:1992 | OXALIC ACID, DIHYDRATE, TECHNICAL |
| ASTM C 146 : 1994 : REV A : R1999 | Standard Test Methods for Chemical Analysis of Glass Sand |
| MIL-DTL-382 Revision E:2014 | Magnesium Powder - For Use In Ammunition |
| ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
| 09/30194936 DC : DRAFT JAN 2009 | BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS |
| ASTM D 5581 : 2007 : REV A | Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
| ASTM D 5892 : 2000 | Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005) |
| AASHTO TP 121 : 2016 | METHOD OF TEST FOR DETERMINING THE VISCOSITY OF EMULSIFIED ASPHALT BY A ROTATIONAL PADDLE VISCOMETER |
| SAE AMS 3411 : 2016 | FLUX, SILVER BRAZING HIGH TEMPERATURE |
| ASTM D 1283 : 2005 : R2013 | Standard Test Method for Alkali-Solubility of Wools (Withdrawn 2022) |
| ASTM D 4570 : 2002 : R2017 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM D 4643 : 2017 : REDLINE | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM D 3639 : 1992 : R2006 : EDT 1 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM C 35 : 2001 : R2009 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 448 :2012 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM D 50 : 1990 : R2011 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| ASTM D 5493 : 2006 : R2011 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM F 2075 : 2015 : REDLINE | Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| AASHTO M 318 : 2002 : R2015 | SPECIFICATION FOR GLASS CULLET USE FOR SOIL-AGGREGATE BASE COURSE |
| MIL-T-13405 Revision E:1984 | TITANIUM, TECHNICAL, POWER |
| DOD D 51522 : 0 | DYE, DISPERSE RED 11 (METRIC) |
| MIL-A-82830 Base Document:1990 | AMMONIUM PERCHLORATE, CONDITIONED (WITH REDUCED ALKALI METAL CONTENT) |
| ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM A 835 : 1984 : R2000 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| API 5A2 : 6ED 88 | BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE |
| ASTM C 87/C87M : 2017 : REDLINE | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| MIL-C-12056 Revision C:1981 | CALCIUM OXIDE, TECHNICAL (METRIC) |
| ASTM D 5821 : 2013 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM E 1520 : 1999 : R2009 | Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
| ASTM D 451 : 1991 : R2008 | Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products |
| ASTM D 7367 : 2014-06 | TEST METHOD FOR DETERMINING WATER HOLDING CAPACITY OF FIBER MULCHES FOR HYDRAULIC PLANTING |
| AWWA B550 : 2017 | CALCIUM CHLORIDE |
| ASTM D 7226 : 2013 : R2017 | Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer |
| ASTM D 6374 : 2012 : R2017 : EDT 1 | Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
| ASTM D 8097 : 2017 | Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer |
| SAE AMS 3041 : 2014 | MAGNETIC PARTICLES, NONFLUORESCENT, WET METHOD, OIL VEHICLE, READY-TO-USE |
| ASTM D 185 : 2007 | Standard Test Methods for Coarse Particles in Pigments |
| SAE AS 5127/1 : 2014 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| API 13A : 2010 : INC : ERR 3 : 2015 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM C 430 : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM D 6647 : 2001 : R2011 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM E 2542 : 2008 | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| SAE AMS 2431 : 2018 | PEENING MEDIA, GENERAL REQUIREMENTS |
| ASTM D 4315 : 1994 : R2006 | Standard Test Methods for Rubber Compounding Material-Zinc Oxide |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM C 702/C702M : 2018 : REDLINE | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM D 4072 : 1998 : R2013 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| ASTM C 888 : 2003 : R2008 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
| ASTM D 4931 : 2006 | Standard Test Method for Gross Moisture in Green Petroleum Coke |
| ASTM C 142/C142M : 2017 : REDLINE | Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM D 480 : 1988 : R2003 | Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| I.S. EN ISO 28460:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS |
| ASTM D 5092/D5092M : 2016 : REDLINE | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
| UNI EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| ASTM D 4570 : 2002 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM A 601/A601M : 2010 | Standard Specification for Electrolytic Manganese Metal |
| AASHTO T 176 : 2008 | METHOD OF TEST FOR PLASTIC FINES IN GRADED AGGREGATES AND SOILS BY USE OF THE SAND EQUIVALENT TEST |
| ASTM C 1077 : 2017 : REDLINE | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| BS EN ISO 10426-1:2009 | Petroleum and natural gas industries. Cements and materials for well cementing Specification |
| ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| AASHTO T 99 : 2015 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 2.5-KG (5.5-LB) RAMMER AND A 305-MM (12-IN.) DROP |
| ASTM D 1705 : 1992 | Test Method for Particle Size Analysis of Powdered Polymers and Copolymers of Vinyl Chloride (Withdrawn 1998) |
| ASTM D 5004 : 2011 : R2017 | Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
| ASTM D 7655/D7655M : 2012 | Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems |
| ASTM F 3091/F3091M : 2014 | Standard Specification for Powder Bed Fusion of Plastic Materials |
| ASTM E 728 : 1991 : R1997 | Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides |
| ASTM D 1914 : 1995 : R2010 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM D 441 : 2007 : R2012 | Standard Test Method of Tumbler Test for Coal |
| ASTM D 4749 : 1987 : R2012 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM C 472 : 1999 : R2004 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| ASTM D 8135 : 2017 | Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
| ASTM C 1078 : 1987 : R1992 : EDT 1 | Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998) |
| ASTM C 357 : 2007 : R2009 : EDT 1 | Standard Test Method for Bulk Density of Granular Refractory Materials |
| ASTM D 2589 : 1988 : R2002 : EDT 1 | Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber |
| ASTM C 1152/C1152M : 2004 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM D 2487 : 2017 : REDLINE | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM D 2861 : 1987 : R2004 | Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ASTM D 2589 : 1988 : R2002 | Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber |
| ASTM C 708 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Beryllium Oxide Powder |
| ASTM C 184 : 1994 : EDT 1 | Standard Test Method for Fineness of Hydraulic Cement by the 150-µm (No. 100) and 75-µm (No. 200) Sieves (Withdrawn 2002) |
| ASTM C 492 : 1992 : R2013 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| ASTM D 1742 : 2006 | Standard Test Method for Oil Separation from Lubricating Grease During Storage |
| ASTM D 1370/D1370M : 2012 | Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
| ASTM D 4718 : 1987 : R1994 : EDT 2 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 4371 : 2006 : R2012 | Standard Test Method for Determining the Washability Characteristics of Coal |
| ASTM D 936 : 1989 | Method of Test for Aromatic Hydrocarbons in Olefin-Free Gasolines by Silica Gel Absorption (Withdrawn 1990) |
| ASTM D 1665 : 1998 | Standard Test Method for Engler Specific Viscosity of Tar Products |
| ASTM D 451 : 1991 : R1996 : EDT 1 | Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products |
| ASTM D 3880 : 1990 : R1999 | Standard Test Method for Asbestos Strength Units |
| ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| ASTM D 5159 : 2004 : R2014 | Standard Guide for Dusting Attrition of Granular Activated Carbon |
| ASTM D 444 : 1988 : R2008 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM D 5299/D5299M : 2018 : REDLINE | Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 2331 : 2008 : R2013 | Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits |
| ASTM D 480 : 1988 : R1999 | Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| ASTM D 1266 : 2018 : REDLINE | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
| ASTM D 1665 : 1998 : R2003 | Standard Test Method for Engler Specific Viscosity of Tar Products |
| ASTM D 2861 : 1987 : R1998 | Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 4930 : 2006 : R2017 | Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
| ASTM C 225 : 1985 : R2014 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM D 4943 : 2008-07 | TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD |
| I.S. EN ISO 13678:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS (ISO 13678:2010) |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| I.S. CWA 14243:2002 | POST-CONSUMER TYRE MATERIALS AND APPLICATIONS |
| NSF 50 : 2016 | EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES |
| BS EN ISO 7711-3:2004 | Dentistry. Diamond rotary instruments Grit sizes, designation and colour code |
| ISO 17824:2009 | Petroleum and natural gas industries Downhole equipment Sand screens |
| ISO 20568-2:2017 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 13503-2 : 2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 2: MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| 03/112565 DC : DRAFT AUG 2003 | ISO 6182-9 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES |
| ISO 13501:2011 | Petroleum and natural gas industries Drilling fluids Processing equipment evaluation |
| ISO 6182-9:2005 | Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles |
| EN ISO 28460:2010 | Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010) |
| EN ISO 7711-3:2004 | Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
| EN ISO 17824:2014 | Petroleum and natural gas industries - Downhole equipment - Sand screens (ISO 17824:2009) |
| EN ISO 13501:2011 | Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011) |
| EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| EN ISO 13678:2012 | Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010) |
| ASTM A 635/A635M : 2015 : REDLINE | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| ASTM F 1864 : 2016 : REDLINE | Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
| MIL-STD-1445 Revision A:1994 | METAL ORGANIC COMPOUNDS, TECHNICAL GRADE |
| MIL-STD-1207 Revision B:1987 | INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (POTASSIUM BICARBONATE THROUGH SILVER CYANIDE) |
| MIL-DTL-211 Revision F:2000 | Phosphorus, Red, Technical |
| AWWA B702 : 2011 | SODIUM FLUOROSILICATE |
| ASTM C 24 : 2009 | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials |
| ASTM D 1863 : 2005 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
| ASTM D 421 : 1985 : R1998 | Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
| API 13C REDLINE : 2010 | RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION |
| ASTM D 1914 : 1995 : R2004 : EDT 1 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM D 4315 : 1994 : R2017 | Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
| AWWA B102:2015 | MANGANESE GREENSAND FOR FILTERS |
| AWWA B200 : 2017 | SODIUM CHLORIDE |
| ASTM D 1866 : 1979 : R1984 | Test Method for Translucency of Mineral Aggregate Used on Built-Up Roofs (Withdrawn 1989) |
| SAE AMS 3042 : 2014 | MAGNETIC PARTICLES, NONFLUORESCENT, WET METHOD, DRY POWDER |
| ASTM E 2016 : 2015 : REDLINE | Standard Specification for Industrial Woven Wire Cloth |
| ASTM D 1301 : 1991 : R1999 | Standard Test Methods for Chemical Analysis of White Lead Pigments |
| ASTM C 1746/C1746M : 2012 | Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices |
| ASTM C 575 : 1981 : R1990 | Methods for Chemical Analysis of Silica Refractories |
| UNE-EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| API 13A : 2010 : INC : ERR 4 : 2016 : R201500 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 3904 : 1990 | Test Method for Oil From Oil Shale (Resource Evaluation by the Fischer Assay Procedure) (Withdrawn 1996) |
| ASTM C 135 : 1996 | Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
| ASTM C 329 : 1988 : R1999 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| MIL-P-62680 Base Document:1992 | POWDER, NICKEL-CHROMIUM/ALUMINUM COMPOSITE (METRIC) |
| ASTM D 4072 : 1998 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| ASTM F 1953 : 2010 | Standard Guide for Construction and Maintenance of Grass Tennis Courts |
| ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM D 560/D560M : 2016 : REDLINE | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 3880 : 1990 : R2004 : EDT 1 | Standard Test Method for Asbestos Strength Units |
| MIL-STD-286 Revision C:1991 | PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING |
| AASHTO T 59 : 2015 | METHOD OF TEST FOR EMULSIFIED ASPHALTS |
| ASTM D 1665 : 1998 : R2014 | Standard Test Method for Engler Specific Viscosity of Tar Products |
| UFC 3-260-02 : 2001 | UNIFIED FACILITIES CRITERIA - PAVEMENT DESIGN FOR AIRFIELDS |
| ASTM D 126 : 1987 : R1997 | Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
| P-C-437 Revision B:1978 | CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER |
| AASHTO T 135 : 2013 | METHOD OF TEST FOR WETTING-AND-DRYING TEST OF COMPACTED SOIL-CEMENT MIXTURES |
| MIL-STD-1448 Base Document:1990 | HYDROCARBON COMPOUNDS & SOLVENT DISTILLATES, TECHNICAL GRADE |
| ASTM D 1370 : 2000 : R2007 | Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
| ASTM E 32 : 2015 | Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition |
| ASTM D 6084/D6084M : 2013-12 | TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER |
| ASTM D 560 : 2003 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (Withdrawn 2012) |
| ASTM D 2752/D2752M : 1988 : R2011 : EDT 1 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| SAE J 2441 : 2015 | SHOT PEENING |
| ASTM D 4715 : 1998 : R2003 | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
| MIL-B-36282 Base Document:1964 | BEAD, GLASS, LABORATORY, PLASTIC SPECTACLE FRAME WARMER, 5 LB |
| MIL-STD-1217 Revision C:1991 | ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
| ASTM C 123/C123M : 2014 : REDLINE | Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023) |
| ASTM D 3038 : 1993 : R2004 | Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 269 : 1997 : R2011 | Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
| ASTM D 422 : 1963 : R2007 : EDT 2 | Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016) |
| MIL-C-51067 Revision B:1983 | CALCIUM MAGNESIUM CARBONATE, TECHNICAL (METRIC) |
| ASTM E 828 : 1981 : R2004 | Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
| ASTM D 422 : 1963 : R2002 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM E 728 : 1991 : R2004 : EDT 1 | Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides |
| API 13A REDLINE : 2010 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| MIL C 82783 : NOTICE 1 | |
| DOD-P-51463 Base Document:1980 | PHOSPHOROUS, RED, OILED, TECHNICAL (METRIC) |
| ASTM D 1278 : 1991 : REV A : R2007 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 1135 : 1986 : R2004 | Standard Test Methods for Chemical Analysis of Blue Pigments |
| BS EN ISO 20568-2:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ASTM D 3038 : 1993 : R2010 | Standard Test Method for Drop Shatter Test for Coke |
| ASTM D 197 : 1987 : R2002 | Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
| AASHTO T 195 : 2011 : R2015 | METHOD OF TEST FOR DETERMINING DEGREE OF PARTICLE COATING OF ASPHALT MIXTURES |
| BS ISO 13678:2000 | Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
| ASTM C 357 : 2007 : R2015 | Standard Test Method for Bulk Density of Granular Refractory Materials |
| MIL-P-46994 Revision B:1982 | PELLETS/GRANULES BORON/POTASSIUM NITRATE |
| ASTM E 915 : 2016 : REDLINE | Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
| AWWA B402 : 2012 | FERROUS SULFATE |
| MIL-A-202 Revision C:1981 | ANTHRACENE, TECHNICAL (METRIC) |
| ASTM C 141 : 1997 | Standard Specification for Hydraulic Hydrated Lime for Structural Purposes |
| ASTM D 2014 : 1997 : R2004 | Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven |
| ASTM C 1747/C1747M : 2013 : REDLINE | Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion |
| ASTM C 28/C28M : 2010 : R2015 | Standard Specification for Gypsum Plasters |
| ASTM D 2947 : 1988 : R2002 | Standard Test Method for Screen Analysis of Asbestos Fibers |
| MIL-A-175 Revision C:1983 | AMMONIUM NITRATE, TECHNICAL (METRIC) |
| MIL-DTL-10866 Revision E:2005 | UREA, TECHNICAL (METRIC) |
| BS 6828-6.3(1993) : AMD 9234 | DENTAL ROTARY INSTRUMENTS - DIAMOND INSTRUMENTS - SPECIFICATION FOR GRIT SIZES, DESIGNATION AND COLOUR CODE |
| API 5A3 RUSSIAN : 2015 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| ASTM A 922 : 2005 | Standard Specification for Silicon Metal |
| MIL-STD-1437 Revision A:1993 | ORGANIC CHEMICAL COMPOUNDS, SOLID, TECHNICAL GRADE |
| ASTM D 1739 : 1998 : R2010 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM C 781 : 2008 : R2014 | Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components |
| ASTM D 4371 : 2006 | Standard Test Method for Determining the Washability Characteristics of Coal |
| ASTM D 3639/D3639M : 1992 : R2011 : EDT 1 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM D 444 : 1988 : R2003 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM C 146 : 1994 : REV A : R2009 | Standard Test Methods for Chemical Analysis of Glass Sand |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| ASTM D 716 : 1986 : R2012 | Standard Test Methods for Evaluating Mica Pigment |
| ASTM D 3997 : 1997 | Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light |
| ASTM C 500/C500M : 2007 : R2011 : EDT 1 | Standard Test Methods for Asbestos-Cement Pipe |
| ASTM C 1387 : 2014 : REDLINE | Standard Guide for the Determination of Technetium-99 in Soil |
| SAE AMS 1448 : 2014 | SAND, AIRPORT SNOW AND ICE CONTROL |
| ASTM C 576 : 1981 : R1990 | Methods for Chemical Analysis of Zircon Refractories |
| ASTM D 1748 : 2010 | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| ASTM D 3280 : 1985 : R2014 | Standard Test Methods for Analysis of White Zinc Pigments |
| ASTM C 1436 : 2013 : REDLINE | Standard Specification for Materials for Shotcrete |
| API 13A : 2010 : INC : ERR 4 : 2016 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| AASHTO T 143 : 2013 | METHOD OF TEST FOR SAMPLING AND TESTING CALCIUM CHLORIDE FOR ROADS AND STRUCTURAL APPLICATIONS |
| ASTM C 492 : 1992 : R2003 | Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
| ASTM D 5097 : 1990 : R1996 | Standard Test Method for Filter-Retained Solids Content of Polymer Latexes (Withdrawn 2004) |
| ASTM A 481 : 2005 | Standard Specification for Chromium Metal |
| ASTM D 4513 : 2011 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
| ASTM C 750 : 2009 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
| API 13A : 2010 : INC : ERR 2 : 2015 | SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
| SAE AMS 3410 : 2016 | FLUX, SILVER BRAZING |
| API RP 13C : 2014 | RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION |
| ASTM D 5341 : 1999 : R2010 | Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
| ASTM A 483 : 2004 | Standard Specification for Silicomanganese |
| ASTM D 2785 : 1980 | Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987) |
| AASHTO M 318 : 2002 : R2010 | SPECIFICATION FOR GLASS CULLET USE FOR SOIL-AGGREGATE BASE COURSE |
| ASTM C 1797M : 2016 | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| ASTM C 323 : 1956 : R2006 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| SAE AMS 3412 : 2014 | FLUX, ALUMINUM BRAZING FOR TORCH OR FURNACE BRAZING |
| ASTM D 2067 : 1997 : R2008 : EDT 1 | Standard Test Method for Coarse Particles in Printing Ink Dispersions |
| DIN EN ISO 20568-2:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ASTM D 444 : 1988 : R1999 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM A 610 : 1979 : R2009 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
| ASTM D 1118 : 1995 : R2004 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 50 : 1990 : R1999 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
| ASTM C 146 : 1994 : REV A : R2004 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM D 2415 : 2015 : REDLINE | Standard Test Method for Ash in Coal Tar and Pitch |
| ASTM F 104 : 2011 : REDLINE | Standard Classification System for Nonmetallic Gasket Materials |
| ASTM D 6155 : 2015 | Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures |
| ASTM F 2953 : 2012 | Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages |
| ASTM D 1214:2010 | Standard Test Method for Sieve Analysis of Glass Spheres |
| ASTM C 1567 : 2013 : REDLINE | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
| ASTM C 1124 : 1990 : R1999 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM D 444 : 1988 : R2014 | Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM D 502 : 1989 : R2003 | Standard Test Method for Particle Size of Soaps and Other Detergents |
| ASTM E 359 : 2017 : REDLINE | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM D 2187 : 2017 : REDLINE | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM C 24 : 2009 : R2018 | Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ASTM D 2774 : 2012 : REDLINE | Standard Practice for Underground Installation of Thermoplastic Pressure Piping |
| ASTM D 4749 : 1987 : R2002 | Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM E 728 : 1991 : R2015 | Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides |
| ASTM D 1865/D1865M : 2009 : R2017 | Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs |
| ASTM D 5514/D5514M : 2018 : REDLINE | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 494 : 2011 : REDLINE | Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
| ASTM D 559 : 2003 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012) |
| ASTM D 4616 : 1995 : R2018 | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
| ASTM E 102/E102M : 1993 : R2016 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
| ASTM C 888 : 2003 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
| ASTM D 422 : 1963 : R2007 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
| ASTM C 285 : 2010 : R2015 : EDT 1 | Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel |
| ASTM D 2752 : 1988 : R2002 : EDT 1 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM C 323 : 1956 : R1999 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| ASTM A 835/A835M : 2010 : R2015 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
| ASTM D 7226 : 2013 | Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer |
| ASTM A 100 : 2007 | Standard Specification for Ferrosilicon |
| ASTM D 2589 : 1988 : R2006 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM F 1284 : 2009 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM D 6913 : 2004 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 2589 : 1988 : R2002 : EDT 2 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 4959 : 2016 : REDLINE | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM D 3639 : 1992 : R2006 | Standard Test Method for Classification of Asbestos by Quebec Standard Test |
| ASTM C 1124 : 1990 : R2004 : EDT 1 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM D 480 : 1988 : R2008 | Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| ASTM D 1301 : 1991 : R2003 | Standard Test Methods for Chemical Analysis of White Lead Pigments |
| ASTM D 5519 : 2015 : REDLINE | Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials |
| ASTM D 1214 : 2010 : R2015 : EDT 1 | Standard Test Method for Sieve Analysis of Glass Spheres |
| ASTM C 1124 : 1990 : R2004 | Standard Test Method for Kerosene Retention of Asbestos |
| ASTM C 123 : 2004 | Standard Test Method for Lightweight Particles in Aggregate |
| ASTM D 1118/D1118M : 1995 : R2009 : EDT 1 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 452/D452M : 1991 : R2013 : EDT 1 | Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
| ASTM D 293 : 1993 : R2004 | Standard Test Method for the Sieve Analysis of Coke |
| ASTM C 1176 : 2005 | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ASTM D 3402 : 1993 | Standard Test Method for Tumbler Test for Coke |
| ASTM D 5514 : 2006 : R2011 | Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 1921 : 2012-09 | TEST METHODS FOR PARTICLE SIZE (SIEVE ANALYSIS) OF PLASTIC MATERIALS |
| ASTM D 440 : 2007 : R2012 | Standard Test Method of Drop Shatter Test for Coal |
| ASTM E 102 : 1993 : R1997 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
| ASTM C 1524 : 2002 : REV A : R2010 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 2019) |
| ASTM D 4570 : 2002 : R2012 | Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM C 131/C131M : 2014 : REDLINE | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM C 472 : 1999 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| ASTM D 6390 : 2011 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 6390 : 2011 : R2017 | Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
| ASTM D 718 : 1986 : R2008 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
| ASTM D 5158 : 1998 : R2013 | Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving |
| ASTM D 1242 : 1995 : REV A | Standard Test Methods for Resistance of Plastic Materials to Abrasion (Withdrawn 2004) |
| ASTM D 1135 : 1986 : R1999 | Standard Test Methods for Chemical Analysis of Blue Pigments |
| ASTM C 371 : 2009 : R2018 | Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders |
| ASTM D 2320 : 1998 | Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| ASTM D 197 : 1987 : R2012 | Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
| ASTM D 4026 : 2006 | Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
| ASTM D 6647 : 2001 | Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
| ASTM A 132 : 2004 : R2009 | Standard Specification for Ferromolybdenum |
| ISO 28460:2010 | Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 7711-3:2004 | DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3: GRIT SIZES, DESIGNATION AND COLOUR CODE |
| ASME NQA 2 : 89 SPECIAL NOTICE | QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| ASTM E 2016 : 2015 : REDLINE | Standard Specification for Industrial Woven Wire Cloth |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.