ASTM D 996 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology of Packaging and Distribution Environments
Available format(s)
PDF
Superseded date
25-03-2023
Superseded by
Language(s)
English
Published date
10-11-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.09, 2015 Provides definitions of technical terms employed in distribution and packaging environments.
| Committee |
D 10
|
| DocumentType |
Redline
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This terminology is a compilation of definitions of technical terms used in the packaging and distribution environments. Terms that are generally understood or adequately found in other readily available sources are not included.
1.2A definition is a single sentence with additional information included in discussions.
1.3Definitions that are identical to those published by another standards organization or ASTM committee are identified with the name of the organization or ASTM committee.
1.4The definitions in this terminology are grouped into related areas under principal concepts. The broad descriptor term for each group is followed in alphabetical order by narrower terms and related terms. Cross-references are included where the concept group is not obvious.
1.5Terminology related to flexible barrier packaging is found in Terminology F17.
| ASTM D 5749 : 2017 : REDLINE | Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing |
| ASTM D 6880 : 2005 | Standard Specification for Wood Boxes |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| ASTM D 1974/D1974M : 2016 : REDLINE | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 6398 : 2008 | Standard Practice to Enhance Identification of Drug Names on Labels |
| ASTM D 7478/D7478M : 2011 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM F 2338 : 2009 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| ASTM D 5265 : 2009 | Standard Test Method for Bridge Impact Testing |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| ASTM D 2063 : 1991 : R2002 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| ASTM D 5728 : 2012 : REDLINE | Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport |
| ASTM D 4504 : 1994 : R2000 : EDT 1 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D 3069 : 1994 : R1999 : EDT 1 | Standard Test Method for Delivery Rate of Aerosol Products |
| ASTM D 4168 : 1995 : R2002 | Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
| ASTM D 3833/D3833M : 1996 : R2006 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM F 2391 : 2005 : R2016 | Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| PPP-B-576 Revision C:1993 | BOX, WOOD-CLEATED PANELBOARD |
| ASTM D 3580 : 1995 : R2004 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D 5094 : 2004 | Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures |
| ASTM D 5459 : 1995 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
| ASTM D 3813/D3813M : 1998 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
| ASTM D 6590/D6590M : 2000 : R2006 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D 6295/D6295M:1998 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D 5748 : 1995 : R2007 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
| ASTM D 6255/D6255M:2005 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D 1185 : 1998 : REV A | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM D 7298 : 2006 : R2011 : EDT 1 | Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation |
| ASTM D 3089 : 1997 : R2017 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes (Withdrawn 2023) |
| ASTM D 6537 : 2000 : R2014 | Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM D 5834 : 1995 | Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004) |
| ASTM D 3833/D3833M : 1996 : R2001 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 3087 : 1991 : R1998 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 7434 : 2008 : R2014 | Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads (Withdrawn 2018) |
| ASTM D 5570 : 1994 : R2005 | Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure |
| ASTM D 3332 : 1999 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D 3332 : 1999 : R2016 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D 880 : 1992 : R2002 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D 4003 : 1998 : R2009 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
| ASTM D 4504 : 1994 : R2011 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D 5330/D5330M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D 5748 : 1995 : R2001 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
| ASTM D 5458 : 1995 | Standard Test Method for Peel Cling of Stretch Wrap Film |
| ASTM D 1185 : 1998 : REV A : R2003 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM F 2338 : 2009 : R2013 | Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
| ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 2063/D2063M : 2010 : R2012 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment |
| ASTM D 6398 : 2008 : R2014 | Standard Practice to Enhance Identification of Drug Names on Labels (Withdrawn 2022) |
| ASTM D 880 : 1992 : R2015 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D 5112 : 1998 : R2003 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 5487 : 2016 : REDLINE | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM D 4774 : 2011 | Standard Specification for User Applied Drug Labels in Anesthesiology |
| ASTM D 895 : 1994 | Standard Test Method for Water Vapor Permeability of Packages (Withdrawn 1999) |
| ASTM D 5264 : 1998 | Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| ASTM D 4775 : 2004 | Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) |
| ASTM D 5414 : 1995 : R2001 | Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D 6653 : 2001 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D 5331 : 2003 : R2016 | Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films |
| ASTM D 6804 : 2002 : R2011 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 3816/D3816M : 1996 : R2001 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM F 1585 : 2000 | Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006) |
| ASTM D 7030 : 2004 : R2009 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 5277 : 1992 : R2008 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D 5277 : 1992 : R2015 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
| ASTM D 7387 : 2013 : REDLINE | Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods) |
| ASTM D 3079 : 1994 : R2003 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
| ASTM D 5416 : 1995 : R2001 | Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing |
| ASTM D 4521 : 1996 | Standard Test Method for Coefficient of Static Friction of Corrugated and Solid Fiberboard (Withdrawn 2001) |
| ASTM D 6653 : 2001 : R2006 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D 3715/D3715M : 1998 | Standard Practice for Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D 5264 : 1998 : R2011 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| MIL-STD-147 Revision E:2008 | PALLETIZED UNIT LOADS |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 2658 : 2004 : R2013 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 3813/D3813M : 1998 : R2003 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
| ASTM D 2860/D2860M : 2018 : REDLINE | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
| ASTM D 5277 : 1992 | TEST METHOD FOR PERFORMING PROGRAMMED HORIZONTAL IMPACTS USING AN INCLINED IMPACT TESTER |
| ASTM D 5276 : 1998 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 6344 : 2004 : R2009 | Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 4774 : 2011 : R2017 | Standard Specification for User Applied Drug Labels in Anesthesiology (Withdrawn 2022) |
| ASTM D 3652/D3652M : 2001 : R2012 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM D 3330/D3330M : 2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 6804 : 2002 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 2063/D2063M : 2010 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment |
| ASTM D 5112 : 1998 : R2015 | Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products |
| ASTM D 3715/D3715M : 1998 : R2004 | Standard Practice for Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D 6055 : 1996 : R2002 | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 5331 : 2003 | Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films |
| ASTM D 4774 : 2011 : EDT 1 | Standard Specification for User Applied Drug Labels in Anesthesiology |
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 7434 : 2008 | Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads |
| ASTM D 5458 : 1995 : R2012 | Standard Test Method for Peel Cling of Stretch Wrap Film |
| ASTM D 4649 : 2003 : R2016 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 6804 : 2002 : R2015 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 3580 : 1995 : R1999 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D 3813/D3813M : 1998 : R2012 : EDT 1 | Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes |
| ASTM D 3332 : 1999 : R2004 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D 951 : 2017 | Standard Test Method for Water Resistance of Shipping Containers by Spray Method |
| ASTM D 6253 : 2016 : REDLINE | Standard Practice for Treatment and/or Marking of Wood Packaging Materials |
| ASTM D 6055 : 1996 | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 3482 : 2007 : REV A | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM D 6788 : 2002 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D 5415 : 1995 : R2001 | Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing |
| ASTM D 5486/D5486M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM D 3074 : 1994 | Standard Test Methods for Pressure in Metal Aerosol Containers (Withdrawn 2000) |
| ASTM D 5416 : 1995 : R2012 | Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing |
| ASTM D 5416 : 1995 : R2007 | Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing |
| ASTM D 3652/D3652M : 2001 : R2006 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM D 3889/D3889M : 1996 : R2001 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM D 1596 : 2014 : REDLINE | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 7580/D7580M : 2009 : R2014 | Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads (Withdrawn 2018) |
| ASTM D 6537 : 2000 : R2006 | Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM D 1251 : 1994 | Standard Test Method for Water Vapor Permeability of Packages by Cycle Method (Withdrawn 1999) |
| ASTM D 6590/D6590M :2000 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D 7435 : 2008 | Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers |
| ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM D 6590/D6590M : 2000 : R2012 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D 6653/D6653M : 2013 : REDLINE | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
| ASTM D 4279 : 1995 | Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
| ASTM D 1185 : 1998 : REV A : R2017 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM D 3084 : 2005 : R2012 | Standard Practice for Alpha-Particle Spectrometry of Water |
| ASTM D 3811/D3811M : 1996 : R2018 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D 5459 : 1995 : R2001 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
| ASTM D 4279 : 1995 : R2003 | Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
| ASTM D 6255/D6255M : 2005 : R2011 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D 6537 : 2000 | Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| ASTM D 2063 : 1991 : R1998 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures |
| ASTM D 1975 : 2016 : REDLINE | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
| ASTM D 4577 : 2005 : R2010 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 880 : 1992 : R2008 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D 5112 : 1998 : R2009 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 642 : 2015 : REDLINE | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM D 6252/D6252M : 1998 : R2011 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D 6252/D6252M : 1998 : R2004 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D 5077 : 1990 : R2009 | Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 3076 : 2000 : R2005 | Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D 5571 : 2016 : REDLINE | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
| MIL-STD-904 Revision C:2010 | Detection, Identification, and Prevention of Pest Infestation of Subsistence |
| ASTM D 6123/D6123M : 1997 : R2007 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM D 3652/D3652M : 2001 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
| ASTM D 3813/D3813M : 1998 : R2007 | Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
| CSA Z264.3 : 1998 : R2010 | USER-APPLIED DRUG LABELS IN ANAESTHESIA AND CRITICAL CARE |
| ASTM D 5488 : 1994 | TERMINOLOGY OF ENVIRONMENTAL LABELING OF PACKAGING MATERIALS AND PACKAGES |
| ASTM D 6198 : 2018 : REDLINE | Standard Guide for Transport Packaging Design |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| ASTM D 3330/D3330M : 2004 : R2018 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 3611 : 2006 : R2019 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| ASTM D 6788 : 2002 : R2012 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D 6179 : 2007 | Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 5459 : 1995 : R2012 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
| ASTM D 7030 : 2004 : R2017 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| CSA Z264.3 : 1998 : R2005 | USER-APPLIED DRUG LABELS IN ANAESTHESIA AND CRITICAL CARE |
| ASTM D 3076 : 2000 : R2010 | Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D 3079 : 1994 : R2009 : EDT 1 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products (Withdrawn 2018) |
| ASTM D 4775/D4775M : 2009 | Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| ASTM D 5375/D5375M : 1998 : R2004 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 6179 : 2007 : R2014 | Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 3482 : 2007 : REV A : R2014 | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM D 5276 : 1998 : R2009 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 4991 : 2007 | Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method |
| ASTM D 7298 : 2006 | Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation |
| ASTM D 5459 : 1995 : R2007 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
| ASTM D 3332 : 1999 : R2010 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
| ASTM D 5077 : 1990 : R2015 | Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 4504 : 1994 : R2005 | Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods |
| ASTM D 3715/D3715M : 1998 : R2011 | Standard Practice for Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D 5264 : 1998 : R2004 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
| ASTM D 3889/D3889M : 1996 : R2012 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| ASTM F 2391 : 2005 | Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| ASTM D 999 : 2008 | Standard Test Methods for Vibration Testing of Shipping Containers |
| ASTM D 5570 : 1994 : R1999 | Standard Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure |
| ASTM D 5416 : 1995 | Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing |
| ASTM D 3611 : 2006 : R2011 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| ASTM D 4577 : 2005 : R2018 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 6123/D6123M : 1997 : R2012 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM D 5748 : 1995 : R2012 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
| ASTM D 5748 : 1995 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
| ASTM D 4003 : 1998 : R2015 | TEST METHODS FOR PROGRAMMABLE HORIZONTAL IMPACT TEST FOR SHIPPING CONTAINERS AND SYSTEMS |
| ASTM D 999 : 2008 : R2015 | Standard Test Methods for Vibration Testing of Shipping Containers |
| ASTM D 4649 : 2003 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 3069 : 1994 : R2005 | Standard Test Method for Delivery Rate of Aerosol Products |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| ASTM D 3084 :2005 | Standard Practice for Alpha-Particle Spectrometry of Water |
| ASTM D 5330/D5330M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
| ASTM D 3811/D3811M : 1996 : R2011 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D 3833/D3833M : 1996 : R2011 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
| ASTM D 4649 : 2003 : R2009 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 3482 : 2007 | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| MIL-STD-3010 Revision B:2008 | Test Procedures for Packaging Materials and Containers |
| ASTM F 2825 : 2018 : REDLINE | Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery |
| ASTM D 6123/D6123M : 1997 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM D 3330/D3330M : 2004 : R2010 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 6123/D6123M : 1997 : R2003 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| ASTM D 6788 : 2002 : R2007 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D 3889/D3889M : 1996 : R2006 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
| MIL-STD-3028 Base Document:2009 | JOINT MODULAR INTERMODAL CONTAINER |
| ASTM D 6252/D6252M : 1998 : R2019 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D 4041 : 2005 | Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 6344 : 2004 : R2017 | Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 3759/D3759M : 2005 | Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
| ASTM D 3069 : 1994 : R2013 | Standard Test Method for Delivery Rate of Aerosol Products (Withdrawn 2022) |
| ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D 4279 : 1995 : R2009 | Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
| ASTM D 4279 : 1995 : R2017 | Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods |
| ASTM D 3087 : 1991 : R2004 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM F 2227 : 2013 : REDLINE | Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO<sub>2</sub> Tracer Gas Method |
| ASTM D 6295/D6295M : 1998 : R2004 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| MIL-HDBK-774 Revision A:2004 | PALLETIZED UNIT LOADS |
| ASTM D 2658 : 2004 : R2009 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 5639/D5639M :2011 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 5458 : 1995 : R2001 | Standard Test Method for Peel Cling of Stretch Wrap Film |
| ASTM D 7860 : 2014 | Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment |
| ASTM D 5375/D5375M : 1998 : R2011 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 4991 : 2007 : R2015 | Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method |
| ASTM D 5458 : 1995 : R2007 | Standard Test Method for Peel Cling of Stretch Wrap Film |
| ASTM D 5415 : 1995 : R2012 | Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing |
| ASTM D 5445 : 2015 : REDLINE | Standard Practice for Pictorial Markings for Handling of Goods |
| ASTM D 5415 : 1995 : R2007 | Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing |
| ASTM D 4168 : 1995 | Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
| ASTM D 3816/D3816M : 1996 : R2012 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM D 4168 : 1995 : R2015 | Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
| ASTM D 5375/D5375M : 1998 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 1968 : 2015 | Standard Terminology Relating to Paper and Paper Products |
| ASTM D 5570/D5570M : 2010 : R2015 | Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure |
| ASTM D 6573/D6573M : 2013 : REDLINE | Standard Specification for General Purpose Wirebound Shipping Boxes |
| ASTM D 3087 : 1991 : R2009 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 3950 : 2017 : REDLINE | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| ASTM F 3169 : 2016 | Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement |
| ASTM D 5094/D5094M : 2009 | Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures |
| ASTM D 5331 : 2003 : R2009 : EDT 1 | Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films |
| ASTM D 5094/D5094M : 2009 : R2014 | Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures (Withdrawn 2023) |
| ASTM D 5415 : 1995 | Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing |
| ASTM D 3079 : 1994 : R1999 | Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| ASTM D 3103 : 2014 : REDLINE | Standard Test Method for Thermal Insulation Performance of Distribution Packages |
| ASTM D 5077 : 1990 : R2003 | Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 5414 : 1995 | Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D 4041/D4041M : 2005 : R2010 : EDT 1 | Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers |
| ASTM D 6254/D6254M : 2013 : REDLINE | Standard Specification for Wirebound Pallet-Type Wood Boxes |
| ASTM D 7298 : 2006 : R2017 | Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation |
| ASTM D 4775/D4775M : 2009 : R2014 | Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) (Withdrawn 2022) |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 998 : 1994 | Standard Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers (Withdrawn 1999) |
| ASTM D 6804 : 2002 : R2007 | Standard Guide for Hand Hole Design in Corrugated Boxes |
| ASTM D 2063/D2063M : 2010 : R2018 | Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| ASTM D 5663 : 2015 : REDLINE | Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard |
| ASTM D 1185 : 1998 : REV A : R2009 | Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping |
| ASTM D 7386 : 2016 : REDLINE | Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems |
| ASTM D 3811/D3811M : 1996 : R2006 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D 3811/D3811M : 1996 : R2001 | Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
| ASTM D 4728 : 2017 : REDLINE | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ASTM D 4168 : 1995 : R2008 : EDT 1 | Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials |
| ASTM D 5276 : 1998 : R2004 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 3652M : 1993 | Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998) |
| ASTM D 3611 : 2006 | Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes |
| ASTM D 5570/D5570M : 2010 | Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure |
| ASTM D 2658 : 2004 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| MIL-STD-129-2 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - MEDICAL MATERIAL |
| ASTM D 3759/D3759M : 2005 : R2011 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
| ASTM D 5112 : 1998 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 4919 : 2017 | Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings |
| ASTM D 4577 : 2005 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 5276 : 1998 : R2017 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
| ASTM D 880 : 1992 : R1997 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM D 7435 : 2008 : R2014 | Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers (Withdrawn 2018) |
| ASTM D 7580/D7580M : 2009 | Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads |
| ASTM D 5414 : 1995 : R2007 | Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D 3816/D3816M : 1996 : R2007 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM D 5486/D5486M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM D 6055 : 1996 : R2014 | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 3816/D3816M : 1996 : R2003 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
| ASTM D 3076 : 2000 | Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D 7030 : 2004 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 6295/D6295M : 1998 : R2011 | Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape |
| ASTM D 5277 : 1992 : R2002 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D 3580 : 1995 : R2010 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D 6055 : 1996 : R2007 : EDT 1 | Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates |
| ASTM D 6880/D6880M : 2011 : REDLINE | Standard Specification for Wood Boxes |
| ASTM D 5277 : 1992 : R1997 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
| ASTM D 6252/D6252M : 1998 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
| ASTM D 5414 : 1995 : R2012 | Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D 3022 : 1984 : R1996 : EDT 1 | Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
| ASTM D 4041/D4041M : 2005 : R2017 | Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers |
| ASTM D 4003 : 1998 : R2003 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
| ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
| ASTM D 5265 : 2009 : R2016 | Standard Test Method for Bridge Impact Testing |
| ASTM D 6344 : 2004 | Standard Test Method for Concentrated Impacts to Transport Packages |
| ASTM D 4003 : 1998 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems |
| ASTM D 5077 : 1990 : R1997 | Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| ASTM D 6788 : 2002 : R2017 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM F 2228 : 2013 : REDLINE | Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO<sub>2</sub> Tracer Gas Method |
| ASTM F 2391 : 2005 : R2011 | Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas |
| ASTM D 3580 : 1995 : R2015 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
| ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
| ASTM D 5639/D5639M : 2011 : R2015 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 1596 : 2014 : REDLINE | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
| ASTM D 3288 : 2003 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.