ASTM D 905 : 2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
Available format(s)
Hardcopy , PDF
Superseded date
22-04-2021
Superseded by
Language(s)
English
Published date
01-10-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.06, 2015 Defines the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression.
| Committee |
D 14
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood.
1.2 The values stated in SI units are to be regarded as the standard. The values given in brackets are provided for information purposes only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| AA-O-00250 Revision F Interim Revision:1993 | OFFICE FURNITURE, WOOD, UNITIZED (GENERAL SPECIFICATION) |
| AA-W-001950 Base Document:1975 | WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME |
| ASTM D 4689 : 2012-10 | SPECIFICATION FOR ADHESIVE, CASEIN-TYPE |
| AA-F-001165 Revision B Interim Revision:1989 | FURNITURE, METAL FRAME, LAMINATED PLASTIC SURFACED PANELS, CASE GOODS AND TABLES |
| ASTM D 5751 : 1999 : R2005 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 6465 : 1999 : R2012 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 3930 : 20081 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 6465 : 1999 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| CSA A450.1 : 0 | CERAMIC WALL TILE ADHESIVES (ORGANIC) |
| ASTM D 6464 : 2003 : REV A : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 1995 : 1992 : R1998 : EDT 1 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 6465 : 1999 : R2005 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| AA-C-00556 Revision E:1993 | COSTUMER, WOOD, GENERAL OFFICE |
| ASTM D 4502 : 1992 : R1998 : EDT 1 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| AA-C-00300 Revision F Interim Revision:1990 | CHAIRS, WOOD, EXECUTIVE OFFICE, TRADITIONAL |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM D 3110 : 1995 | Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996) |
| ASTM D 950 : 2003 | Standard Test Method for Impact Strength of Adhesive Bonds |
| ASTM D 4502 : 1992 : R2004 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D 4680 : 1998 : R2004 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 4680 : 1998 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 5574 : 1994 : R1999 : EDT 1 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 3983 : 1998 : R2004 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 2093 : 2003 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D 6464 : 2003 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 5751 : 1999 : R2012 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 1995 : 1992 : R2004 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 7199 : 2007 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
| AA-O-001091 Revision C Interim Revision:1990 | OFFICE FURNITURE: SOFA, CHAIR, EASY, EXECUTIVE, TRADITIONAL |
| AA-F-001873 Revision A:1977 | FURNITURE, CONTEMPORARY, OAK (GENERAL SPECIFICATION) |
| MMM-A-180 Revision C:1979 | ADHESIVE POLYVINYL ACETATE EMULSION |
| ASTM D 4027 : 1998 : R2004 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| MMM-A-188 Revision C:1975 | ADHESIVE UREA-RESIN=TYPE (LIQUID AND POWDER) |
| ASTM D 5751 : 1999 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 3931 : 2008 : R2015 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
| ASTM D 7446 : 2009 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM D 4680 : 1998 : R2011 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 4027 : 1998 : R2011 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 7966/D7966M : 2016 : REDLINE | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 5574 : 1994 : R2005 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 7199 : 2007 : R2012 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
| ASTM C 557 : 2003 : R2009 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 3983 : 1998 : R2011 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 4027 : 1998 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| AA-B-001596 Revision A Interim Revision:1974 | BOOKCASE, WOOD, GENERAL OFFICE |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| ASTM D 1995 : 1992 : R2011 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM C 557 : 2003 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 557 : 2003 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 1995 : 1992 : R2017 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 6464 : 2003 : REV A | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 950 : 2003 : R2011 | Standard Test Method for Impact Strength of Adhesive Bonds |
| ASTM D 5266 : 2013 : REDLINE | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
| A-A-1270 Base Document:1996 | ADHESIVE, POLYVINYL ACETATE EMULSION, GENERAL PURPOSE |
| MMM-A-181 Revision D:1980 | ADHESIVE PHENOL RESORCINOL OR MELAMINE BASE |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| ASTM D 3983 : 1998 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 4680 : 1998 : R2017 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 3930 : 2008 : R2015 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM D 2093 : 2003 : R2011 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D 7446 : 2009 : R2017 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 1037 : 2012 : REDLINE | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM D 3931 : 2008 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
| ASTM D 2093 : 2003 : R2017 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 7247 : 2017 : REDLINE | Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
| ASTM D 143 : 2014 : REDLINE | Standard Test Methods for Small Clear Specimens of Timber |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| ASTM D 5266 : 2013 : REDLINE | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.