ASTM D 8051/D8051M : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wax-Modified Asphalt Used in Roofing
Hardcopy , PDF
09-06-2023
English
12-07-2016
CONTAINED IN VOL. 04.00, 2016 Defines wax-modified asphaltic products intended for use in built-up roof construction, construction of bituminous vapor retarder systems, adhering fleece-backed single-ply roof membranes, and adhering insulation boards used in various types of roof systems.
Committee |
D 08
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This specification covers wax-modified asphaltic products intended for use in built-up roof construction, construction of bituminous vapor retarder systems, adhering fleece-backed single-ply roof membranes, and adhering insulation boards used in various types of roof systems. The specification is intended for general classification purposes only, and does not imply restrictions on roofing system design, such as the slope at which this asphalt may be used.
1.2These products have lower application temperatures compared to products specified by Specification D312/D312M.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 1079 : 2018 : EDT 1 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 1079 : 2008 : REV A | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 2042 : 2001 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 4402/D4402M : 2023 | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
ASTM D 1079 : 2016 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 1079 : 2006 | Terminology Relating to Roofing and Waterproofing |
ASTM D 1079 : 2020 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 7553 : 2015 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 3461 : 1997 : R2007 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 2042 : 1997 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 312/D312M : 2016 : REV A | Standard Specification for Asphalt Used in Roofing |
ASTM D 312/D312M : 2016 : REV A : R2023 | Standard Specification for Asphalt Used in Roofing |
ASTM D 1079 : 2013 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 1079 : 2007 : REV A | Terminology Relating to Roofing and Waterproofing |
ASTM D 36/D36M : 2014 : EDT 1 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
ASTM D 1079 : 2010 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 2042 : 2009 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 2042 : 2015 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 7553 : 2015 : REDLINE | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 3461 : 2014 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 1079 : 2018 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 4402/D4402M : 2015 | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
ASTM D 7553 : 2009 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 3461 : 1997 : R2002 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 2042 : 2015 : REDLINE | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM D 1079 : 2005 : REV A | Terminology Relating to Roofing and Waterproofing |
ASTM D 7553 : 2010 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 3461 : 1997 : R2012 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 1079 : 2002 | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
ASTM D 3461 : 2018 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 1079 : 2001 | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
ASTM D 7553 : 2015 : R2021 | Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide |
ASTM D 3461 : 2014-11 | TEST METHOD FOR SOFTENING POINT OF ASPHALT AND PITCH (METTLER CUP-AND-BALL METHOD) |
ASTM D 4402/D4402M : 2015 : REDLINE | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
ASTM D 1079 : 2000 : REV A | Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials |
ASTM D 2042 : 2022 | Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene |
ASTM D 3461 : 1997 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
ASTM D 4402/D4402M : 2015 : R2022 | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
ASTM D 1079 : 2013 : EDT 1 | Standard Terminology Relating to Roofing and Waterproofing |
ASTM D 1079 : 2009 | Standard Terminology Relating to Roofing and Waterproofing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.