ASTM D 7719 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
Hardcopy , PDF
15-06-2021
English
29-10-2018
This specification covers formulating specifications for purchases of a high aromatic content unleaded hydrocarbon aviation gasoline under contract and is intended solely for use by purchasing agencies.2
Committee |
D 02
|
DocumentType |
Standard
|
Pages |
10
|
ProductNote |
THIS STANDARD ALSO REFERS TO- ASTM D130 - 18, ASTM D873 - 12(2018), ASTM D1094 - 07(2019), ASTM D2386 - 18, ASTM D2700 - 18a, ASTM D4057 - 12(2018), ASTM D4814 - 19, ASTM D5059 - 14, ASTM E29 - 13(2019)
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers formulating specifications for purchases of a high aromatic content unleaded hydrocarbon aviation gasoline under contract and is intended solely for use by purchasing agencies.2
1.2This specification defines a specific type of high aromatic content unleaded hydrocarbon aviation gasoline (hereafter also referred to as “D7719 fuel”) for use as an aviation spark-ignition fuel. It does not include all fuels satisfactory for reciprocating aviation engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.
1.3The D7719 fuel defined by this specification does not exhibit identical performance to those leaded fuels for which the existing aircraft and ground-based fuel handling equipment have been designed to operate on. Therefore, the suitability of this fuel for use on any specific aircraft, aircraft engine, or ground-based fuel handling equipment should be evaluated before use on that equipment.
1.4Issuance of this specification does not constitute approval to operate certificated aircraft with this fuel. Fuels used in certified engines and aircraft are ultimately approved by the certifying authority subsequent to formal submission of evidence to the authority as part of the certification program for that aircraft and engine model.
1.5This specification, unless otherwise provided, prescribes the required properties of unleaded fuel at the time and place of delivery.
1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7826 : 2019 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 7960 : 2018 | Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components |
ASTM D 7826 : 2020 : REV A | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 7826 : 2019 : REV A | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 2622 : 1992 : EDT 1 | Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry |
ASTM D 5580 : 2000 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <i>p/m</i>-Xylene, <i>o</i>-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 4865 : 2019 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
ASTM D 6469 : 2004 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 2622 : 1987 : EDT 1 | Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry |
ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
ASTM D 4814 : 2004 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3606 : 2007 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 1298 : 2012 : REV A | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 2700 : 2009 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4171 : 1998 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 2700 : 2018 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 1094 : 2007 : R2013 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 7220 : 2012 | Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4814 : 2016 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2011 : EDT 1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 2386 : 1997 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4171 : 2003 : R2010 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 3606 : 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 2700 : 2007 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4809 : 2000 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 6733 : 2001 : R2016 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography |
ASTM D 1266 : 1998 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 7220 : 2012 : R2017 | Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 5191 : 2018 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method) |
ASTM D 4814 : 2014 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4171 : 2021 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 4814 : 2001 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
ASTM D 3606 : 2004 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 5580 : 2021 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 4814 : 2004 : REV B : EDT 1 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1298 : 2012 : REV B | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
ASTM D 2700 : 2014 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4814 : 2015 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2000 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2009 : EDT 1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 2624 : 2006 : REV A | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2700 : 2007 : REV B | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4294 : 2010 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 4171 : 2011 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 4814 : 2011 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4306 : 1997 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4809 : 2018 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 4306 : 2015 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4809 : 2013 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 1266 : 2013 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 5191 : 2006 : EDT 1 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 6469 : 2012 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 2622 : 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4814 : 2018 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2013 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2386 : 2015 : EDT 1 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 3237 : 2006 : EDT 1 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
ASTM D 1094 : 1999 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 2700 : 2010 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4171 : 2016 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 2700 : 2003 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2700 : 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels by the Motor Method |
ASTM D 2386 : 2005 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 3606 : 2006 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 1298 : 1999 : R2005 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 2386 : 2006 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 2386 : 2006 : R2012 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4809 : 2009 : REV A : EDT 1 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 6469 : 2008 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 4814 : 2018 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1298 : 2012 : REV B : R2017 | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 1298 : 2012 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 1266 : 1987 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 4306 : 2001 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 4814 : 1995 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2009 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2622 : 2008 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 7826 : 2016 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 5059 : 1998 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
ASTM D 7826 : 2018 : REV A | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4814 : 2016 : REV : EDT 0 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4306 : 2007 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2700 : 2012 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4809 : 2000 : R2005 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 1298 : 1999 : EDT 2 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 5191 : 2001 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 2700 : 2012 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5580 : 2002 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <i>p/m</i>-Xylene, <i>o</i>-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 2700 : 1999 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4814 : 2020 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2017 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2700 : 2016 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5580 : 2002 : R2007 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <span class="italic"> p/m</span>-Xylene, <span class="italic">o</span>-Xylene, C<sub>9</sub> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 4814 : 2012 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 7826 : 2018 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 2700 : 2001 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5191 : 2010 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4814 : 2010 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2386 : 2001 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4814 : 2003 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3237 : 2002 | Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy |
ASTM D 4814 : 2001 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5006 : 2003 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 2700 : 2006 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 1298 : 1999 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 4809 : 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 2624 : 2007 : REV A | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2008 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1094 : 2007 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 4814 : 2003 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5059 : 2014 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
ASTM D 5059 : 2021 | Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy |
ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4294 : 2008 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4814 : 2020 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2004 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2386 : 2003 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 5191 : 2012 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4306 : 2012 : REV A | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 910 : 2001 | Standard Specification for Aviation Gasoline's |
ASTM D 6469 : 2014 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 2700 : 2013 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 3606 : 2017 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
ASTM D 3606 : 2006 : EDT 1 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 4814 : 2010 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2008 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4809 : 2009 : REV A | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 2700 : 2018 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5191 : 2003 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 2622 : 2003 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4294 : 2008 : REV A | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 5059 : 2014 : R2019 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
ASTM D 4306 : 2012 : REV B | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2700 : 2016 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2700 : 2003 : REV B | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5191 : 1999 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 7826 : 2017 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4814 : 2009 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2624 : 2000 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4171 : 2016 : REV A | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 5006 : 2011 : R2016 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 4294 : 2002 | Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy |
ASTM D 5580 : 2015 : R2020 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 2700 : 2011 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 1298 : 1999 : EDT 1 | Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 4814 : 2011 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 7826 : 2015 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4814 : 2008 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2002 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4865 : 1998 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
ASTM D 4814 : 2011 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5006 : 1996 : R2001 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 2700 : 2002 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2700 : 2007 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 5059 : 2020 | Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy |
ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2624 : 2001 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 5006 : 1996 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 1094 : 2000 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 7826 : 2013 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4814 : 2006 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4294 : 2016 : EDT 1 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4814 : 2007 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5191 : 2018 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
ASTM D 5191 : 2010 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 5059 : 2007 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
ASTM D 4814 : 2018 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 3237 : 2006 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
ASTM D 4814 : 2006 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2004 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 3606 : 2004 : REV A | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 6733 : 2001 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Meter Capillary High Resolution Gas Chromatography |
ASTM D 4814 : 1992 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3606 : 2010 : EDT 1 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 4294 : 2008 : REV A : EDT 1 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 4814 : 2014 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2015 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
ASTM D 4294 : 1998 | Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy |
ASTM D 5191 : 2002 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4809 : 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 2700 : 2013 : REV B | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4814 : 2007 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2622 : 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 5191 : 2019 | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method) |
ASTM D 4814 : 2009 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6469 : 2017 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 4809 : 2006 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 5580 : 2015 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 4814 : 2018 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6469 : 2011 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 6733 : 2001 : R2006 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography |
ASTM D 4814 : 2013 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2016 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2386 : 2018 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4814 : 2017 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 6469 : 1999 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 4814 : 2021 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4814 : 2000 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 1094 : 2000 : R2005 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 2622 : 2007 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 5059 : 2013 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
ASTM D 7220 : 2006 | Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry |
ASTM D 4814 : 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4306 : 2013 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2622 : 1994 | Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry |
ASTM D 2624 : 2006 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 4814 : 2004 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2622 : 2005 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 2700 : 2017 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 7826 : 2017 : REV A | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4294 : 2003 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry |
ASTM D 6733 : 2001 : R2011 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography |
ASTM D 5006 : 2002 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 2700 : 2003 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5191 : 2004 : REV A | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4306 : 2020 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 3606 : 1999 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 6469 : 2008 : EDT 1 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 3237 : 2017 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
ASTM D 1298 : 1985 : R1990 : EDT 1 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
ASTM D 5191 : 2020 | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method) |
ASTM D 2386 : 2019 | Standard Test Method for Freezing Point of Aviation Fuels |
ASTM D 4294 : 2016 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
ASTM D 7826 : 2019 | Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives |
ASTM D 4814 : 1993 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 3237 : 1997 | Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy |
ASTM D 5191 : 2007 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4814 : 2019 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 2624 : 2009 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2700 : 2004 : EDT 1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 2700 : 2001 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5191 : 2015 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4814 : 2014 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 5006 :2011 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 2624 : 2002 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 2624 : 2015 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 1094 : 2007 : R2019 | Standard Test Method for Water Reaction of Aviation Fuels |
ASTM D 5006 : 2010 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 1266 : 2007 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 5006 : 2010 : EDT 1 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
ASTM D 4814 : 2018 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 2700 : 2019 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 3606 : 1992 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 5191 : 2010 : REV B | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4814 : 2007 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4171 : 2003 | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 5191 : 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 3237 : 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
ASTM D 5191 : 2006 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 4814 : 2013 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 2700 : 2004 : REV A | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 2624 : 2007 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
ASTM D 1266 : 2018 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 4294 : 1990 : R1998 : EDT 1 | Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy |
ASTM D 4306 : 2012 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
ASTM D 2622 : 2016 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
ASTM D 2700 : 2008 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5580 : 2013 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
ASTM D 4306 : 2012 : REV C | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.