ASTM D 7713 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
Available format(s)
Hardcopy , PDF
Superseded date
18-11-2023
Superseded by
Language(s)
English
Published date
08-11-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers both commercial products, engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols.
| Committee |
D 15
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers both commercial products, engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols.
1.2Types EG-1 and PG-1 cover glycols with sufficiently low limits on components to allow a blended coolant to meet most OEM (Original Equipment Manufacturer) specifications. These types will probably be virgin materials, although redistillation could produce a sufficiently pure product. Types EG-2 and PG-2 cover glycol that will be suitable for many coolants. These types can be either redistilled or virgin.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1122 : 2016 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1177 : 2012 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1123 : 1999 : R2009 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 5931 : 1996 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 1122 : 2016 : R2017 : EDT 1 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1177 : 2017 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM E 1177 : 2020 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 1122 : 2020 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1177 : 2005 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1122 : 2008 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1287 : 2011 : R2020 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM E 1177 : 2009 : R2014 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 1287 : 1991 : R1997 : EDT 1 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1122 : 2022 | Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 7736 : 2012 : R2018 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3634 : 1999 : R2009 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 1287 : 2009 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1122 : 1997 : REV A | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1177 : 1994 : R1998 : EDT 1 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM E 1177 : 2003 | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM E 1177 : 2009 | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1209 : 2000 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 4725 : 2011 | Standard Terminology for Engine Coolants |
| ASTM D 1123 : 2022 : REV A | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM E 1177 : 2005 | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM D 1122 : 2013 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 1123 : 1999 : R2003 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM E 394 : 2015 | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 1287 : 2011 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 3634 : 1999 : R2005 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 1123 : 2022 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 5931 : 1996 : R2002 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1613 : 1996 : R1999 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 4725 : 1998 | Standard Terminology for Engine Coolants |
| ASTM D 1177 : 1994 : R1998 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1613 : 2003 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 5827 : 2009 : EDT 1 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 7736 : 2019 : REV A | Standard Test Method for Determination of Acids and Glycol Esters in Glycols |
| ASTM D 6660 : 2001 : R2014 : EDT 1 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 6130 : 1997 : REV A : R2009 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 1123 : 1999 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 6660 : 2001 : R2007 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 5827 : 2022 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM E 1177 : 2003 : REV A | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM D 1123 : 1999 : R2015 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM E 300 : 2003 : R2022 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 3634 : 1999 : R2005 : EDT 1 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 7736 : 2011 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 6660 : 2001 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM E 1177 : 2019 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 6130 : 2011 : R2018 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4725 : 2006 | Standard Terminology for Engine Coolants |
| ASTM D 1123 : 1959 : R1968 | Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method |
| ASTM D 4725 : 2015 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 1209 : 2005 : EDT 1 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM E 1177 : 2014 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 3634 : 2021 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 6130 : 1997 : REV A : R2003 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 1287 : 1991 : R2002 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1613 : 2002 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1613 : 2006 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1613 : 2006 : R2012 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 1177 : 2016 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 5827 : 1995 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 6660 : 2001 : R2019 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 4725 : 2004 | Standard Terminology for Engine Coolants |
| ASTM D 3634 : 1999 : R2015 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM E 1177 : 1998 | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM E 394 : 2000 | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 1613 : 2017 : R2023 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM E 300 : 2003 : R2017 | Standard Practice for Sampling Industrial Chemicals |
| ASTM D 1209 : 2005 : R2011 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 6130 : 2011 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM E 394 : 2022 | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 4725 : 2008 | Standard Terminology for Engine Coolants |
| ASTM D 5931 : 1996 : R2007 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 7736 : 2019 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 1122 : 1997 : REV A : R2002 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 4725 : 2008 : REV A | Standard Terminology for Engine Coolants |
| ASTM D 1209 : 2005 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1177 : 2022 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 5931 : 2013 : R2017 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 5827 : 2009 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 6660 : 2001 : R2023 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 1613 : 2017 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 4725 : 2015 : R2023 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM E 1177 : 2022 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 1177 : 2007 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 3634 : 1999 : EDT 1 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 7736 : 2012 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM E 1177 : 2006 | Standard Specification for Engine Coolant Grade Ethylene Glycol |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4725 : 2013 | Standard Terminology for Engine Coolants and Related Fluids |
| ASTM D 5931 : 2013 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 6130 : 1997 : REV A | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 1209 : 2005 : R2019 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM E 1177 : 2023 | Standard Specification for Engine Coolant Grade Glycol |
| ASTM D 5931 : 2020 | Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.