ASTM D 7700 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Selecting Test Methods for Geomembrane Seams
Available format(s)
Hardcopy , PDF
Superseded date
14-07-2022
Superseded by
Language(s)
English
Published date
28-05-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 35
|
| DocumentType |
Guide
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide is intended for use as a summary of test methods necessary to evaluate geomembrane seams. It is intended to guide geomembrane users toward the appropriate evaluation techniques to assess geomembrane seam quality.
1.2Geomembrane seams covered by this guide are: high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), very low-density polyethylene (VLDPE), flexible polypropylene (fPP), polyvinyl chloride (PVC), ethylene propylene diene terpolymer (EPDM), prefabricated bituminous geomembranes (PBGM), Ethylene Interpolymer Alloy (EIA) and reinforced geomembranes
1.3Although a significant effort has been made to gather all types of geomembranes and related evaluation techniques which were on the market at the date of completion of this document, some available materials and technologies may have been omitted. The information presented in this document shall thus be considered to be non exhaustive.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 7982 : 2015 | Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels |
| ASTM D 7982 : 2015 : R2021 | Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels |
| ASTM D 7002 : 2003 | Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 7749 : 2011 : R2018 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 7006 : 2003 : R2022 | Standard Practice for Ultrasonic Testing of Geomembranes |
| ASTM D 7002 : 2010 | Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System |
| ASTM D 5820 : 1995 : R2006 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 5641 : 1994 : EDT 1 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 6392 : 2012 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 7007 : 2003 | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials |
| ASTM D 4437 : 1999 | Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 7272 : 2006 : R2011 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods |
| ASTM D 7006 : 2003 | Standard Practice for Ultrasonic Testing of Geomembranes |
| ASTM D 6365 : 1999 : R2018 | Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test |
| ASTM D 7007 : 2016 | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials |
| ASTM D 7006 : 2003 : R2008 | Standard Practice for Ultrasonic Testing of Geomembranes |
| ASTM D 5820 : 1995 : R2001 : EDT 1 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 7272 : 2006 : R2018 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 6747 : 2021 | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 7056 : 2004 | Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams |
| ASTM D 6747 : 2002 : EDT 1 | Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane |
| ASTM D 6747 : 2004 | Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 6392 : 2008 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 7177 : 2005 : R2010 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| ASTM D 7002 : 2016 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 4437 : 2008 : R2013 | Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 7749 : 2011 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method |
| ASTM D 6747 : 2012 | Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes |
| ASTM D 5641 : 1994 : R2011 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 5820 : 1995 : R2018 | Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes |
| ASTM D 7408 : 2008 | Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
| ASTM D 5641 : 1994 : R2001 : EDT 1 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 7747 : 2011 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
| ASTM D 7007 : 2015 | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials |
| ASTM D 7007 : 2009 | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials |
| ASTM D 6214/D6214M : 1998 : R2013 : EDT 1 | Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 7056 : 2007 | Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams |
| ASTM D 7006 : 2003 : R2013 | Standard Practice for Ultrasonic Testing of Geomembranes |
| ASTM D 5641 : 1994 : R2006 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 6365 : 1999 : R2011 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 7177 : 2005 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 6365 : 1999 : R2006 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 6747 : 2015 | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 7056 : 2007 : R2018 | Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams |
| ASTM D 7408 : 2012 : R2020 | Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
| ASTM D 7056 : 2007 : R2012 | Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 6214/D6214M : 1998 : R2022 | Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM D 5820 : 1995 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 6365 : 1999 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 4437 : 2008 | Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 6392 : 1999 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 7408 : 2012 | Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
| ASTM D 7002 : 2015 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method |
| ASTM D 4437 : 1994 : R1988 | Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 6392 : 2012 : R2018 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 7272 : 2006 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods |
| ASTM D 5820 : 1995 : R2011 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.