ASTM D 7667 : 2010 : R2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
Available format(s)
Hardcopy , PDF
Superseded date
04-01-2022
Superseded by
Language(s)
English
Published date
19-02-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the corrosiveness to silver by automotive spark-ignition engine fuel (for example, gasoline), as defined by Specification D4814 or similar specifications in other jurisdictions, having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C (100 °F) by one of two procedures.
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
7
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the corrosiveness to silver by automotive spark-ignition engine fuel (for example, gasoline), as defined by Specification D4814 or similar specifications in other jurisdictions, having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C (100 °F) by one of two procedures.
1.1.1Procedure A—Involves the use of a pressure vessel.
1.1.2Procedure B—Involves the use of a vented test tube.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3WARNING—Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 8076 : 2021 | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5798 : 2020 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
| ASTM D 8011 : 2019 | Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol |
| ASTM D 8275 : 2021 | Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines |
| ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 5797 : 2018 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
| ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 8076 : 2018 | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5797 : 2021 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
| ASTM D 4814 : 2021 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 8076 : 2021 : REV B | Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines |
| ASTM D 5798 : 2021 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
| ASTM D 3241 : 2008 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2009 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2019 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2005 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2004 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| IP 227 : 1999 | DETERMINATION OF CORROSIVENESS TO SILVER OF AVIATION TURBINE FUELS - SILVER STRIP METHOD |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 4814 : 2016 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2001 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2014 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2001 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV B : EDT 1 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2006 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2015 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2000 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2014 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2011 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2014 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2017 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2020 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2018 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2018 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 1995 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2009 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2015 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2016 : REV : EDT 0 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2017 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2020 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2012 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2019 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2010 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2003 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2001 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2009 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2021 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2015 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2003 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2020 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2010 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2008 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2001 : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2009 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2011 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2008 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2002 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2011 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2019 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2005 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2006 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2007 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
| ASTM D 3241 : 2015 : EDT 2 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2016 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2006 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 1992 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2014 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2015 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2007 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2009 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2019 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2018 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2002 : REV A : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2016 : REV D | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2017 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 1998 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 4814 : 2021 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2000 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2004 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2011 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 3241 : 2005 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2013 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 1993 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2014 : REV B : EDT 1 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4814 : 2019 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2014 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2016 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2012 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2018 : REV C | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4814 : 2021 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2007 : REV B | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814 : 2013 : REV A | Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 3241 : 2004 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3241 : 2016 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2011 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.