ASTM D 6797 : 2024
Current
The latest, up-to-date edition.
Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
Hardcopy , PDF
English
01-06-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method describes the measurement for bursting strength of woven and knitted textiles taken from rolls of fabric or fabric taken from garments.
Note 1:For the measurement of bursting strength with a hydraulic or pneumatic machine, refer to Test Method D3786/D3786M. For the measurement of the bursting strength by means of a ball burst mechanism, refer to Test Method D3787
Note 2:Constant Rate of Traverse (CRT) machines and Constant Rate of Extension (CRE) machines have been shown to provide different results. When using a CRT device, refer to Test Method D3787.
1.2The values stated in either SI units or U.S. customary units are to be regarded as standard, but must be used independently of each other. The U.S. customary units may be approximate.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 4850 : 2023 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 5378 : 2012 : R2019 | Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use |
| ASTM F 3510 : 2021 | Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products |
| ASTM D 3787 : 2016 : R2020 | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
| ASTM D 7268 : 2023 | Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear |
| ASTM D 3996 : 2023 | Standard Performance Specification for Knit Swimwear Fabrics |
| ASTM D 5433 : 2012 : R2019 | Standard Performance Specification for Towel Products for Institutional and Household Use |
| ASTM F 3354 : 2019 | Standard Guide for Evaluating Extracellular Matrix Decellularization Processes |
| ASTM D 3995 : 2023 | Standard Performance Specification for Knitted Career Apparel Fabrics: Dress and Vocational |
| ASTM D 3786/D3786M : 2018 : R2023 | Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method |
| ASTM D 4769 : 2012 : R2018 : EDT 1 | Standard Specification for Woven and Warp Knitted Comforter Fabrics |
| ASTM D 5432 : 2012 : R2019 | Standard Performance Specification for Blanket Products for Institutional and Household Use |
| ASTM D 1776/D1776M : 2020 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 1776/D1776M : 2020 : R2024 | Standard Practice for Conditioning and Testing Textiles |
| ASTM D 2904 : 1997 : R2002 | Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data (Withdrawn 2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.