ASTM D 6615 : 2015 : REV A : R2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
Available format(s)
Hardcopy , PDF
Superseded date
23-08-2022
Superseded by
Language(s)
English
Published date
06-11-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 02
|
| DocumentType |
Standard
|
| Pages |
10
|
| ProductNote |
THIS STANDARD ALSO REFERS TO CAN/CGSB 3.22-97, EI/JIG1530.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.
1.2This specification defines one specific type of aviation turbine fuel for civil use. This fuel has advantages for operations in very low temperature environments compared with other fuels described in Specification D1655. This fuel is intended for use in aircraft that are certified to use such fuel.
1.3This specification does not define the quality assurance testing and procedures necessary to ensure that fuel in the distribution system continues to comply with this specification after batch certification. Such procedures are defined elsewhere, for example in ICAO 9977, EI/JIG Standard 1530, JIG 1, JIG 2, API 1543, API 1595, and ATA-103.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2276 : 2006 : R2014 | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
| ASTM D 5452 : 2012 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 4868 : 2017 | Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels |
| ASTM D 4529 : 2017 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 1655 : 2019 | Standard Specification for Aviation Turbine Fuels |
| ASTM D 6824 : 2013 : R2018 | Standard Test Method for Determining Filterability of Aviation Turbine Fuel |
| ASTM D 7095 : 2017 | Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip |
| ASTM D 5452 : 2020 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 7224 : 2020 | Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4176 : 2021 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 3241 : 2019 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3241 : 2020 : REV C | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3948 : 2014 : R2018 | Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
| ASTM D 3240 : 2015 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 4176 : 2004 : R2019 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 4171 : 2021 | Standard Specification for Fuel System Icing Inhibitors |
| ASTM D 1322 : 2019 | Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel |
| ASTM D 1655 : 2021 : REV A | Standard Specification for Aviation Turbine Fuels |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4306 : 2015 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 5006 : 2011 : R2021 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 1655 : 2020 : REV D | Standard Specification for Aviation Turbine Fuels |
| ASTM D 3241 : 2020 | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 1655 : 2022 | Standard Specification for Aviation Turbine Fuels |
| ASTM D 2624 : 2021 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 4952 : 1997 | Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) |
| ASTM D 1322 : 2022 | Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel |
| ASTM D 4529 : 1995 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 3240 : 1991 : R1996 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM D 2624 : 2021 : REV A | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 5001 : 1990 : REV A : R1995 : EDT 1 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 3241 : 2019 : REV A | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 3240 : 2022 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM D 4294 : 2008 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 5001 : 2019 : EDT 1 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 1655 : 2021 : REV B | Standard Specification for Aviation Turbine Fuels |
| ASTM D 4171 : 2016 : REV A | Standard Specification for Fuel System Icing Inhibitors |
| ASTM D 5006 : 2011 : R2016 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 1655 : 1985 : REV A | Standard Specification for Aviation Turbine Fuels |
| ASTM D 4865 : 1998 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 5006 : 1996 : R2001 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 2624 : 2001 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 4176 : 2021 : REV A | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 4294 : 2016 : EDT 1 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 6379 : 2021 : EDT 1 | Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection |
| ASTM D 5452 : 2020 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 4176 : 2020 | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D 1655 : 2021 | Standard Specification for Aviation Turbine Fuels |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 381 : 2019 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 1655 : 2021 : REV C | Standard Specification for Aviation Turbine Fuels |
| ASTM D 5191 : 2019 | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method) |
| ASTM D 1660 : 1987 | Method of Test for Thermal Stability of Aviation Turbine Fuels (Withdrawn 1992) |
| ASTM D 381 : 2022 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 4294 : 2021 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 3241 : 2019 : REV B | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| ASTM D 1840 : 1996 | Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
| ASTM D 2622 : 2021 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 4057 : 2022 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 6379 : 2021 | Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection |
| ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4306 : 2020 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 5191 : 2020 | Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method) |
| ASTM D 5001 : 2019 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 1655 : 2020 : REV A | Standard Specification for Aviation Turbine Fuels |
| ASTM D 1655 : 2020 | Standard Specification for Aviation Turbine Fuels |
| ASTM D 2624 : 2015 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 1094 : 2007 : R2019 | Standard Test Method for Water Reaction of Aviation Fuels |
| ASTM D 1655 : 2019 : REV A | Standard Specification for Aviation Turbine Fuels |
| ASTM D 1319 : 2002 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption |
| ASTM D 2622 : 2016 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 5972 : 1999 : REV A : EDT 1 | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) |
| ASTM D 1322 : 2018 | Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 6379 : 2011 : R2019 | Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection |
| ASTM D 4171 : 2022 | Standard Specification for Fuel System Icing Inhibitors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.