ASTM D 653 : 2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Soil, Rock, and Contained Fluids
Available format(s)
Hardcopy , PDF
Superseded date
22-09-2021
Superseded by
Language(s)
English
Published date
02-02-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 18
|
| DocumentType |
Reference Material
|
| Pages |
49
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These definitions apply to many terms found in the Terminology section of standards of ASTM Committee D18.
1.2This terminology standard defines terms related to soil, rock, and contained fluids found in the various sections of standards under the jurisdiction of ASTM Committee D18.
1.3Definitions of terms relating to frozen soils are contained in Terminology D7099.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6393/D6393M : 2021 | Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM E 2531 : 2006 : R2020 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM D 4373 : 2021 | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM E 2856 : 2013 : R2021 | Standard Guide for Estimation of LNAPL Transmissivity |
| ASTM D 4535 : 2021 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
| ASTM D 4491/D4491M : 2021 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 7780 : 2020 | Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features |
| ASTM D 7560 : 2016 : EDT 1 | Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
| ASTM D 6103/D6103M : 2017 : EDT 1 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
| ASTM D 7830/D7830M : 2014 : R2021 : EDT 1 | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASTM D 6758 : 2018 : EDT 1 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
| ASTM D 6938 : 2017 : REV A : EDT 1 | Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
| ASTM D 7014 : 2018 : EDT 1 | Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses |
| ASTM D 4748 : 2010 : R2020 | Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar |
| ASTM E 1676 : 2012 : R2021 | Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm <emph type="ital">Eisenia Fetida</emph > and the Enchytraeid Potworm <emph type="ital">Enchytraeus albidus</emph > |
| ASTM D 7928 : 2021 : EDT 1 | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
| ASTM D 8281/D8281M : 2021 | Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol |
| ASTM D 4992 : 2014 : EDT 2 | Standard Practice for Evaluation of Rock to be Used for Erosion Control |
| ASTM D 5220/D5220M : 2021 | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 6572 : 2021 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
| ASTM D 4186/D4186M : 2020 : EDT 1 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
| ASTM F 1953 : 2010 : R2018 | Standard Guide for Construction and Maintenance of Grass Tennis Courts |
| ASTM D 1557 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 6230 : 2021 : EDT 1 | Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers |
| ASTM D 7759/D7759M : 2021 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
| ASTM D 5321/D5321M : 2021 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 7762 : 2018 : EDT 1 | Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
| ASTM D 7702/D7702M : 2014 : R2021 | Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
| ASTM D 4546 : 2021 | Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
| ASTM D 5030/D5030M : 2021 | Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit |
| ASTM D 5313/D5313M : 2021 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D 7698 : 2021 | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
| ASTM D 698 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 5195 : 2014 : EDT 1 | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
| ASTM D 6026 : 2021 | Standard Practice for Using Significant Digits and Data Records in Geotechnical Data |
| ASTM D 4753 : 2015 | Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing |
| ASTM D 559/D559M : 2015 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
| ASTM D 5490 : 1993 : R2014 : EDT 1 | Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information (Withdrawn 2023) |
| ASTM D 1634 : 2017 | Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method) |
| ASTM D 7262 : 2010 : R2016 : EDT 1 | Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
| ASTM D 4829 : 2021 | Standard Test Method for Expansion Index of Soils |
| ASTM D 5334 : 2014 | Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
| ASTM D 4525 : 2013 : EDT 2 | Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022) |
| ASTM D 5311/D5311M : 2013 | Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022) |
| ASTM D 5855/D5855M : 2020 | Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well |
| ASTM D 4944 : 2018 | Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
| ASTM D 5744 : 2018 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 6727/D6727M : 2016 | Standard Guide for Conducting Borehole Geophysical Logging—Neutron |
| ASTM E 2838 : 2011 : R2016 | Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
| ASTM D 6452 : 2018 | Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations |
| ASTM D 5980 : 2016 | Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring |
| ASTM D 2944 : 2014 | Standard Practice of Sampling Processed Peat Materials |
| ASTM D 4015 : 2015 : EDT 1 | Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices |
| ASTM D 4554 : 2012 | Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021) |
| ASTM F 480 : 2014 | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM D 1143/D1143M : 2020 | Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load |
| ASTM D 6639 : 2018 | Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations |
| ASTM D 6726 : 2015 | Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Withdrawn 2024) |
| ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 1635/D1635M : 2019 | Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading |
| ASTM D 6024/D6024M : 2016 | Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 5872/D5872M : 2018 | Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
| ASTM D 6773 : 2016 | Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester |
| ASTM D 6914/D6914M : 2016 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
| ASTM D 5126 : 2016 : EDT 1 | Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone |
| ASTM D 6430 : 2018 | Standard Guide for Using the Gravity Method for Subsurface Site Characterization |
| ASTM E 2787 : 2011 : R2016 | Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 5239 : 2012 : EDT 1 | Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization (Withdrawn 2021) |
| ASTM D 4648/D4648M : 2016 | Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil |
| ASTM D 5978/D5978M : 2016 | Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells |
| ASTM D 2936 : 2020 | Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens |
| ASTM D 5092/D5092M : 2016 | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
| ASTM D 6001/D6001M : 2020 | Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization |
| ASTM D 5887/D5887M : 2020 | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 6103/D6103M : 2017 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
| ASTM D 2977 : 2014 | Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
| ASTM D 6724/D6724M : 2016 | Standard Guide for Installation of Direct Push Groundwater Monitoring Wells |
| ASTM D 4633 : 2016 | Standard Test Method for Energy Measurement for Dynamic Penetrometers |
| ASTM D 5607 : 2016 | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
| ASTM D 4520 : 2018 | Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods |
| ASTM D 6234 : 2013 : R2020 | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 5881 : 2020 | Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 4972 : 2019 | Standard Test Methods for pH of Soils |
| ASTM D 6141 : 2018 | Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids |
| ASTM D 5141 : 2011 : R2018 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
| ASTM D 1241 : 2015 | Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024) |
| ASTM D 5923 : 2018 | Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
| ASTM D 2167 : 2015 | Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024) |
| ASTM D 5971/D5971M : 2016 | Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material |
| ASTM D 4044/D4044M : 2015 | Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers (Withdrawn 2024) |
| ASTM D 4631 : 2018 | Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique |
| ASTM D 586 : 2019 | Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products |
| ASTM D 7663 : 2012 : R2018 : EDT 1 | Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations |
| ASTM D 6635 : 2015 | Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024) |
| ASTM D 6941 : 2019 | Standard Practice for Measuring Fluidization Segregation Tendencies of Powders |
| ASTM D 6461/D6461M : 2018 | Standard Specifications for Silt Fence Materials |
| ASTM D 7764 : 2020 | Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers |
| ASTM D 5777 : 2018 | Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation |
| ASTM D 4643 : 2017 | Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating |
| ASTM D 7277 : 2016 | Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow |
| ASTM D 2937 : 2017 : EDT 2 | Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method |
| ASTM D 7949 : 2014 | Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023) |
| ASTM D 6780/D6780M : 2019 | Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
| ASTM D 6030 : 2015 | Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability (Withdrawn 2024) |
| ASTM D 4435 : 2013 : EDT 1 | Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022) |
| ASTM D 2978 : 2015 : EDT 1 | Standard Test Methods for Volume of Processed Peat Materials |
| ASTM E 2060 : 2006 : R2014 | Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
| ASTM D 4253 : 2016 : EDT 1 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM D 4767 : 2011 : R2020 | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
| ASTM D 6825 : 2014 : EDT 1 | Standard Guide for Placement of Riprap Revetments |
| ASTM D 6913/D6913M : 2017 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6033 : 2016 | Standard Guide for Describing the Functionality of a Groundwater Modeling Code |
| ASTM D 5608 : 2016 | Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites |
| ASTM D 5874 : 2016 | Standard Test Methods for Determination of the Impact Value (IV) of a Soil |
| ASTM D 5080 : 2020 | Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 8169/D8169M : 2018 | Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load |
| ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
| ASTM D 8198 : 2018 | Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches |
| ASTM D 3839 : 2014 : R2019 | Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
| ASTM D 3550/D3550M : 2017 | Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
| ASTM D 6938 : 2017 : REV A | Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) |
| ASTM D 6027/D6027M : 2015 | Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes |
| ASTM D 6169/D6169M : 2013 | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
| ASTM D 5084 : 2016 : REV A | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 7702/D7702M : 2014 | Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
| ASTM D 4106 : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
| ASTM D 4511 : 2011 : R2020 | Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
| ASTM D 6235 : 2018 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 5610 : 1994 : R2014 | Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling (Withdrawn 2023) |
| ASTM D 8053 : 2018 | Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing |
| ASTM D 7367 : 2019 : EDT 2 | Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting |
| ASTM D 698 : 2012 : EDT 2 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM C 1127/C1127M : 2015 | Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface |
| ASTM D 2321 : 2020 | Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications |
| ASTM D 4221 : 2018 | Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer |
| ASTM D 8152 : 2018 | Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test |
| ASTM D 6771 : 2018 | Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations |
| ASTM D 1587/D1587M : 2015 | Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024) |
| ASTM D 2850 : 2015 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ASTM D 6432 : 2019 | Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation |
| ASTM D 8107 : 2018 | Standard Practice for Determining Sediment Pond Skimmer Flow Rate |
| ASTM D 4945 : 2017 | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
| ASTM D 8359 : 2020 | Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer |
| ASTM D 6684 : 2018 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
| ASTM D 5220 : 2014 | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
| ASTM D 5737/D5737M : 2019 | Standard Guide for Methods for Measuring Well Discharge |
| ASTM D 5143 : 2006 : R2015 : EDT 1 | Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023) |
| ASTM D 5858 : 1996 : R2020 | Standard Guide for Calculating <emph type="ital">In Situ</emph> Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
| ASTM D 7608 : 2018 | Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils |
| ASTM D 6230 : 2013 | Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers |
| ASTM D 7263 : 2021 | Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens |
| ASTM D 5719 : 2013 | Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes (Withdrawn 2022) |
| ASTM D 5611 : 1994 : R2016 | Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application |
| ASTM D 6151/D6151M : 2015 | Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024) |
| ASTM D 6725/D6725M : 2016 | Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers |
| ASTM D 8106 : 2017 | Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay |
| ASTM D 7300 : 2018 | Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain |
| ASTM E 2243 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| ASTM D 7242/D7242M : 2006 : R2013 : EDT 1 | Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022) |
| ASTM D 7014 : 2018 | Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses |
| ASTM D 8326 : 2021 | Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall |
| ASTM D 6088 : 2006 : R2016 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 7503 : 2018 | Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils |
| ASTM D 6092 : 2014 : EDT 1 | Standard Practice for Specifying Standard Sizes of Stone for Erosion Control |
| ASTM D 3740 : 2019 | Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
| ASTM D 4083 : 1989 : R2016 | Standard Practice for Description of Frozen Soils (Visual-Manual Procedure) |
| ASTM D 5521/D5521M : 2018 | Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers |
| ASTM D 5875/D5875M : 2018 | Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices |
| ASTM D 5850 : 2020 | Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM D 7299 : 2020 | Standard Practice for Verifying Performance of a Vertical Inclinometer Probe |
| ASTM D 7499/D7499M : 2009 : R2014 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
| ASTM D 6467 : 2013 : EDT 1 | Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils |
| ASTM D 4543 : 2019 | Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances |
| ASTM D 4535 : 2013 : EDT 2 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
| ASTM D 6026 : 2013 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 5268 : 2019 : EDT 1 | Standard Specification for Topsoil Used for Landscaping and Construction Purposes |
| ASTM D 4612 : 2016 | Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil |
| ASTM D 5255 : 2015 | Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock |
| ASTM D 5434 : 2012 | Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021) |
| ASTM D 2166/D2166M : 2016 | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
| ASTM D 5335 : 2014 | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
| ASTM D 7015/D7015M : 2018 | Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils |
| ASTM D 5195 : 2014 | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
| ASTM D 7045 : 2017 | Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities |
| ASTM D 4544 : 2020 | Standard Practice for Estimating Peat Deposit Thickness |
| ASTM D 4992 : 2014 : EDT 1 | Standard Practice for Evaluation of Rock to be Used for Erosion Control |
| ASTM D 6429 : 2020 | Standard Guide for Selecting Surface Geophysical Methods |
| ASTM D 1556/D1556M : 2015 : EDT 1 | Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024) |
| ASTM D 3551 : 2017 | Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer |
| ASTM D 2573/D2573M : 2018 | Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils |
| ASTM D 1883 : 2016 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 2974 : 2020 : EDT 1 | Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils |
| ASTM D 425 : 2017 | Standard Test Method for Centrifuge Moisture Equivalent of Soils (Withdrawn 2024) |
| ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM D 5715 : 2014 | Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method) |
| ASTM F 2536 : 2017 | Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs |
| ASTM D 4506 : 2013 : EDT 1 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test |
| ASTM D 7762 : 2018 | Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
| ASTM E 2277 : 2014(R2019) | Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM D 7760 : 2018 | Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter |
| ASTM D 5878 : 2019 | Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes |
| ASTM D 806 : 2019 | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 6517 : 2018 | Standard Guide for Field Preservation of Ground Water Samples |
| ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7128 : 2018 | Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation |
| ASTM D 5312/D5312M : 2012 : R2013 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
| ASTM D 7272 : 2006 : R2018 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 7243 : 2011 : R2020 | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
| ASTM D 5472/D5472M : 2020 | Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 5233 : 1992 : R2017 | Standard Test Method for Single Batch Extraction Method for Wastes |
| ASTM D 8232 : 2018 | Standard Test Procedures for Measuring the Inclination of Deep Foundations |
| ASTM D 5779/D5779M : 2014 | Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023) |
| ASTM D 7698 : 2020 | Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method |
| ASTM D 4553 : 2018 | Standard Test Method for Determining In Situ Creep Characteristics of Rock |
| ASTM D 8249 : 2019 | Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
| ASTM D 6910/D6910M : 2019 | Standard Test Method for Marsh Funnel Viscosity of Construction Slurries |
| ASTM D 5088 : 2020 | Standard Practice for Decontamination of Field Equipment Used at Waste Sites |
| ASTM D 4186/D4186M : 2020 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
| ASTM F 2747 : 2019 | Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees |
| ASTM D 1997 : 2020 | Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass |
| ASTM D 8038 : 2016 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM D 7012 : 2014 : EDT 1 | Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
| ASTM D 7481 : 2018 | Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder |
| ASTM D 6393 : 2014 | Standard Test Method for Bulk Solids Characterization by Carr Indices |
| ASTM D 7048 : 2016 | Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs |
| ASTM D 6459 : 2019 | Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion |
| ASTM D 5519 : 2015 | Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024) |
| ASTM D 5284 : 2009 : R2017 | Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
| ASTM D 4394 : 2017 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method |
| ASTM D 7099 : 2004 : R2018 | Standard Terminology Relating to Frozen Soil and Rock |
| ASTM D 4050 : 2020 | Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 5981/D5981M : 2018 | Standard Guide for Calibrating a Groundwater Flow Model Application |
| ASTM D 5299/D5299M : 2018 | Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities |
| ASTM D 6572 : 2020 | Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test |
| ASTM D 4719 : 2020 | Standard Test Methods for Prebored Pressuremeter Testing in Soils |
| ASTM D 7322/D7322M : 2017 | Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions |
| ASTM D 6170 : 2017 | Standard Guide for Selecting a Groundwater Modeling Code |
| ASTM D 4542 : 2015 | Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer |
| ASTM D 6634/D6634M : 2014 | Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells (Withdrawn 2023) |
| ASTM D 8215 : 2020 | Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources |
| ASTM D 6102 : 2020 | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 6564/D6564M : 2017 | Standard Guide for Field Filtration of Groundwater Samples |
| ASTM D 4647/D4647M : 2013:R2020 | Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test |
| ASTM D 5716/D5716M : 2020 | Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir |
| ASTM D 4404 : 2018 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
| ASTM D 7338 : 2014 | Standard Guide for Assessment Of Fungal Growth in Buildings |
| ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024) |
| ASTM D 6312 : 2017 | Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities |
| ASTM D 4373 : 2014 | Standard Test Method for Rapid Determination of Carbonate Content of Soils |
| ASTM D 7626 : 2019 : EDT 1 | Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay |
| ASTM D 8081 : 2017 | Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell |
| ASTM D 7928 : 2017 | Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis |
| ASTM E 3183 : 2019 | Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use |
| ASTM D 5550 : 2014 | Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ASTM D 5879/D5879M : 2018 | Standard Practice for Surface Site Characterization for On-Site Septic Systems |
| ASTM D 4254 : 2016 | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
| ASTM D 5121 : 2015 | Standard Practice for Preparation of Rock Slabs for Durability Testing |
| ASTM D 2113 : 2014 | Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023) |
| ASTM D 4436 : 2013 : EDT 1 | Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022) |
| ASTM D 7070 : 2016 | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
| ASTM D 8167/D8167M : 2018 : REV A | Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth) |
| ASTM D 6067/D6067M : 2017 | Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity |
| ASTM D 4428/D4428M : 2014 | Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023) |
| ASTM D 854 : 2014 | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 2488 : 2017 : EDT 1 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
| ASTM D 7765 : 2018 : REV A | Standard Practice for Use of Foundry Sand in Structural Fill and Embankments |
| ASTM D 4959 : 2016 | Standard Test Method for Determination of Water Content of Soil By Direct Heating |
| ASTM D 2844/D2844M : 2018 | Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils |
| ASTM D 5313/D5313M : 2012 : R2013 | Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D 5979 : 1996 : R2019 : EDT 1 | Standard Guide for Conceptualization and Characterization of Groundwater Systems |
| ASTM D 7880/D7880M : 2013 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022) |
| ASTM D 5493 : 2006 : R2016 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 5783 : 2018 | Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 4729 : 2019 | Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method |
| ASTM E 2856 : 2013 | Standard Guide for Estimation of LNAPL Transmissivity |
| ASTM D 7759/D7759M : 2014 | Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration |
| ASTM D 5785/D5785M : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test) |
| ASTM D 6431 : 2018 | Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization |
| ASTM D 5876/D5876M : 2017 | Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 4623 : 2016 | Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge |
| ASTM F 2107 : 2008 : R2020 | Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
| ASTM D 6036 : 1996 : R2014 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023) |
| ASTM D 6023 : 2016 | Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM) |
| ASTM D 5731 : 2016 | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
| ASTM D 6128 : 2016 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
| ASTM D 8151 : 2019 : EDT 1 | Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing |
| ASTM D 3689/D3689M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Static Axial Tensile Load |
| ASTM D 6683 : 2019 | Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress |
| ASTM D 5787 : 2020 | Standard Practice for Monitoring Well Protection At or Near Land Surface |
| ASTM D 7069 : 2004 : R2015 | Standard Guide for Field Quality Assurance in a Groundwater Sampling Event |
| ASTM D 4220/D4220M : 2014 | Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023) |
| ASTM F 1668 : 2016 | Standard Guide for Construction Procedures for Buried Plastic Pipe |
| ASTM D 4700 : 2015 | Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024) |
| ASTM D 4546 : 2014 : EDT 1 | Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
| ASTM D 2973 : 2016 | Standard Test Method for Total Nitrogen in Peat Materials |
| ASTM F 1759 : 1997 : R2018 | Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications |
| ASTM D 4427 : 2018 | Standard Classification of Peat Samples by Laboratory Testing |
| ASTM D 6836 : 2016 | Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge |
| ASTM D 7400/D7400M : 2019 | Standard Test Methods for Downhole Seismic Testing |
| ASTM D 2980 : 2017 : EDT 1 | Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials |
| ASTM D 6032/D6032M : 2017 | Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core |
| ASTM D 8037/D8037M : 2016 | Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils |
| ASTM E 2866 : 2012 : R2016 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 4452 : 2014 | Standard Practice for X-Ray Radiography of Soil Samples |
| ASTM D 7208 : 2014 : EDT 1 | Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
| ASTM D 7830/D7830M : 2014 | Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge |
| ASTM D 6274 : 2018 | Standard Guide for Conducting Borehole Geophysical Logging - Gamma |
| ASTM D 1452/D1452M : 2016 | Standard Practice for Soil Exploration and Sampling by Auger Borings |
| ASTM D 1586/D1586M : 2018 | Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils |
| ASTM D 6243/D6243M : 2020 | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 4223/D4223M : 2020 | Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 5924 : 2018 : REDLINE | Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
| ASTM E 2278 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
| ASTM D 3441 : 2016 | Standard Test Method for Mechanical Cone Penetration Testing of Soils |
| ASTM D 4914/D4914M : 2016 | Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit |
| ASTM D 1632 : 2017 : EDT 1 | Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
| ASTM D 5093 : 2015 : EDT 1 | Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024) |
| ASTM D 2487 : 2017 : EDT 1 | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 6539 : 2013 | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022) |
| ASTM D 5202/D5202M : 2016 | Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils |
| ASTM D 5780 : 2018 | Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load |
| ASTM D 5995 : 2018 | Standard Guide for Environmental Site Investigation in Cold Regions |
| ASTM D 7047 : 2015 : EDT 1 | Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) |
| ASTM D 6758 : 2018 | Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method |
| ASTM D 7013/D7013M : 2015 | Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges |
| ASTM D 7699/D7699M : 2020 | Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites |
| ASTM D 4403 : 2020 | Standard Practice for Extensometers Used in Rock |
| ASTM D 5912 : 2020 | Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
| ASTM E 1676 : 2012 | Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm <i>Eisenia Fetida</i> and the Enchytraeid Potworm <i>Enchytraeus albidus</i> |
| ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| ASTM D 4718/D4718M : 2015 | Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
| ASTM D 6911 : 2015 | Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis (Withdrawn 2024) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5753 : 2018 | Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging |
| ASTM D 6760 : 2016 | Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing |
| ASTM D 3404 : 2015 | Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers (Withdrawn 2024) |
| ASTM D 5918 : 2013 : EDT 1 | Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022) |
| ASTM D 7664 : 2010 : R2018 : EDT 1 | Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils |
| ASTM D 5882 : 2016 | Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations |
| ASTM D 4105/D4105M : 2020 | Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method |
| ASTM D 4644 : 2016 | Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
| ASTM D 5269 : 2015 | Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024) |
| ASTM D 5520 : 2018 | Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
| ASTM D 6706 : 2001 : R2013 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM D 5786 : 2017 | Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems |
| ASTM D 6519 : 2015 | Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
| ASTM D 7181 : 2020 | Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils |
| ASTM D 4696 : 2018 | Standard Guide for Pore-Liquid Sampling from the Vadose Zone |
| ASTM D 2419 : 2014 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 7929 : 2020 | Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells |
| ASTM D 7100 : 2011 : R2020 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 3967 : 2016 | Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
| ASTM D 7380 : 2015 | Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer |
| ASTM E 2993 : 2016 | Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
| ASTM D 7648/D7648M : 2018 | Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment (Withdrawn 2024) |
| ASTM D 8121/D8121M : 2019 | Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device |
| ASTM D 4016 : 2014 | Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) (Withdrawn 2023) |
| ASTM D 4832 : 2016 : EDT 1 | Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
| ASTM D 6167 : 2019 | Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
| ASTM D 6528 : 2017 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
| ASTM D 4380 : 2020 | Standard Test Method for Determining Density of Construction Slurries |
| ASTM D 6276 : 2019 | Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 4395 : 2017 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method |
| ASTM D 5982 : 2015 | Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024) |
| ASTM D 6391 : 2011 : R2020 | Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration |
| ASTM D 5922 : 2018 | Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations |
| ASTM D 5030/D5030M : 2013 : REV A | Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| ASTM D 6766 : 2020 : REV A | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
| ASTM D 3282 : 2015 | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
| ASTM D 4630 : 2019 | Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test |
| ASTM D 5321/D5321M : 2020 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 4092 : 2007 : R2013 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| ASTM D 1140 : 2017 | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 4793 : 2009 : R2017 | Standard Test Method for Sequential Batch Extraction of Waste with Water |
| ASTM D 8012 : 2018 | Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications |
| ASTM D 4318 : 2017 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM D 7352 : 2018 | Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods |
| ASTM D 3385 : 2018 | Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer |
| ASTM D 4611 : 2016 | Standard Test Method for Specific Heat of Rock and Soil |
| ASTM D 6285 : 1999 : R2016 | Standard Guide for Locating Abandoned Wells |
| ASTM D 7351 : 2019 | Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications |
| ASTM D 2435/D2435M : 2011 : R2020 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
| ASTM D 7891 : 2015 | Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell |
| ASTM D 4531 : 2015 | Standard Test Methods for Bulk and Dry Density of Peat and Peat Products |
| ASTM D 7276 : 2016 | Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow |
| ASTM D 7986 : 2017 : REV A | Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing |
| ASTM D 5778 : 2020 | Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils |
| ASTM D 8082 : 2018 | Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application |
| ASTM D 5856 : 2015 | Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024) |
| ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Lateral Load |
| ASTM D 4491/D4491M : 2020 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 6146 : 1997 : R2018 | Standard Guide for Monitoring Aqueous Nutrients in Watersheds |
| ASTM D 6473 : 2015 | Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control |
| ASTM D 7382 : 2020 | Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer |
| ASTM D 7101 : 2013 : EDT 1 | Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022) |
| ASTM D 6640 : 2001 : R2015 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
| ASTM D 5718 : 2013 | Standard Guide for Documenting a Groundwater Flow Model Application (Withdrawn 2022) |
| ASTM D 6000/D6000M : 2015 : EDT 1 | Standard Guide for Presentation of Water-Level Information from Groundwater Sites (Withdrawn 2024) |
| ASTM D 6462 : 2019 | Standard Practice for Silt Fence Installation and Maintenance |
| ASTM D 6598 : 2019 | Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations |
| ASTM D 7560 : 2016 | Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs) |
| ASTM D 2976 : 2015 | Standard Test Method for pH of Peat Materials |
| ASTM D 6820 : 2020 | Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation |
| ASTM D 5447 : 2017 | Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem |
| ASTM D 7458 : 2014 | Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection |
| ASTM D 5473/D5473M : 2020 | Standard Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 7383 : 2019 | Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations |
| ASTM D 5549 : 2019 | Standard Guide for Contents of Geostatistical Site Investigation Report |
| ASTM D 5609 : 2016 | Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling |
| ASTM D 3213 : 2019 | Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil |
| ASTM D 5782 : 2018 | Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 7758 : 2017 | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
| ASTM D 6282/D6282M : 2014 | Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
| ASTM D 5240/D5240M : 2020 | Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate |
| ASTM D 2216 : 2019 | Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass |
| ASTM D 4971 : 2016 | Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack |
| ASTM D 8199 : 2020 | Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control |
| ASTM D 5873 : 2014 | Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023) |
| ASTM D 4943 : 2018 | Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method |
| ASTM D 4043 : 2017 | Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques |
| ASTM D 5269 : 1996 | Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method |
| ASTM D 4186/D4186M : 2020 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
| ASTM D 4750 : 1987 : R1993 : EDT 1 | Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) |
| ASTM D 698 : 2000 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM D 6913/D6913M : 2017 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 4106 : 1996 | Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method |
| ASTM D 6026 : 2013 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 698 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 4253 : 2000 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 4186/D4186M : 2020 : EDT 1 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
| ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
| ASTM D 1557 : 2012 : R2021 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 5088 : 1990 | Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites |
| ASTM D 4429 : 1993 | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2002) |
| ASTM D 4050 : 1996 | Standard Test Method (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM C 802 : 2014 | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM D 4943 : 1995 | Standard Test Method for Shrinkage Factors of Soils by the Wax Method |
| ASTM D 6026 : 1996 : EDT 1 | Standard Practice for Using Significant Digits in Geotechnical Data |
| ASTM D 6026 : 2021 | Standard Practice for Using Significant Digits and Data Records in Geotechnical Data |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM D 1557 : 2009 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| ASTM D 4429 : 2009 | Standard Test Method for CBR (California Bearing Ratio) of Soils in Place |
| ASTM D 698 : 2012 : EDT 2 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.