ASTM D 6470 : 1999 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Salt in Crude Oils (Potentiometric Method)
Hardcopy , PDF
17-08-2020
English
01-04-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.03, 2018 Defines the determination of salt in crude oils. For the purpose of this test method, salt is expressed as % (m/m) NaCl (sodium chloride) and covers the range from 0.0005 to 0.15% (m/m).
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of salt in crude oils. For the purpose of this test method, salt is expressed as % (m/m) NaCl (sodium chloride) and covers the range from 0.0005 % to 0.15 % (m/m).
1.2The limit of detection is 0.0002 % (m/m) for salt (as NaCl).
1.3The test method is applicable to nearly all of the heavier petroleum products, such as crude oils, residues, and fuel oils. It may also be applied to used turbine oil and marine diesel fuel to estimate seawater contamination. Water extractable salts, originating from additives present in oils, are codetermined.
1.4The values stated in SI units are to be regarded as the standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 7455 : 2019 | Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis |
| ASTM D 8056 : 2018 | Standard Guide for Elemental Analysis of Crude Oil |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 7578 : 2018 | Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants |
| ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 : EDT 1 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 4928 : 2000 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4006 : 1981 : R2000 : EDT 1 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 4006 : 2016 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4006 : 2016 : EDT 1 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 : R2006 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
| ASTM D 4006 : 2011 : R2012 : EDT 1 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4928 : 2000 : EDT 1 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 4006 : 2007 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4928 : 2000 : R2010 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4928 : 2000 : R2005 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
| ASTM D 4928 : 2011 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4006 : 2011 : R2012 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4006 : 1981 : R2005 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4928 : 2012 : R2018 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4006 : 2011 | Standard Test Method for Water in Crude Oil by Distillation |
| ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 4928 : 2012 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
| ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 4377 : 2000 : R2011 | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020) |
| ASTM D 329 : 2007 | Standard Specification for Acetone |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.