ASTM D 6302 : 1998 : R2017
Current
The latest, up-to-date edition.
Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
Hardcopy , PDF
English
01-06-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 11.02, 2017 Defines changes in kinetic performance of ion exchange resins used in mixed beds to produce high purity water.
| Committee |
D 19
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice is intended to evaluate changes in kinetic performance of ion exchange resins used in mixed beds to produce high purity water. Within strict limitations, it also may be used for comparing resin of different types. This standard does not seek to mimic actual operating conditions. Specific challenge solutions and conditions are specified. At the option of the user, other conditions may be tested.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 5217 : 2017 | Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
| ASTM D 2187 : 1994 : R1998 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2187 : 1994 : R2004 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2687 : 1995 : R2016 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 5391 : 2014 : REDLINE | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 5391 : 2023 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 2687 : 1995 : R2024 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 2187 : 2017 | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 5391 : 1999 : R2005 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 2687 : 1995 : R2001 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 5391 : 1999 : R2009 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 5391 : 2014 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 2187 : 1994 : R2009 : EDT 1 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2187 : 1994 : R2009 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 2187 : 2017 : REDLINE | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 5391 : 1999 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 2687 : 1995 : R2007 : EDT 1 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.