ASTM D 5950 : 2014 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
English
01-05-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.03, 2015 Specifies the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surface of the test specimen with an optical device.
| Committee |
D 02
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surface of the test specimen with an optical device.
1.2This test method is designed to cover the range of temperatures from −66 °C to +51 °C; however, the range of temperatures included in the 1992 interlaboratory test program only covered the temperature range from −39 °C to +6 °C, and the range of temperatures included in the 1998 interlaboratory test program was −51 °C to −11 °C. (See Section 13.)
1.3Test results from this test method can be determined at 1 °C or 3 °C intervals.
1.4This test method is not intended for use with crude oils.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-PRF-17331 Revision K:2013 | LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
| MIL PRF 009000 : K | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL |
| MIL-PRF-9000 Revision L:2014 | Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel |
| MIL PRF 002104 : L | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| MIL-DTL-16884 Revision P:2017 | FUEL, NAVAL DISTILLATE |
| DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
| DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
| ASHRAE GUIDELINE 40 : 2017 | REFRIGERATION OIL DESCRIPTION |
| MIL-PRF-32490 Base Document:2014 | Additive, Lubricity Improver, Distillate Fuel |
| MIL-PRF-32538 Base Document:2015 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE, NATO CODE NUMBER: O-165 |
| MIL-DTL-32353 Revision A:2012 | HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE |
| ASTM D 6074 : 2015 : REDLINE | Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
| MIL-PRF-2104 Revision K:2016 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| SAE J 313 : 2017 | DIESEL FUELS |
| ASTM D 7666 : 2012 | Standard Specification for Triglyceride Burner Fuel |
| SAE AS 5780 : 2018 | SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| MIL-PRF-17672 Revision E:2010 | Hydraulic Fluid, Petroleum, Inhibited |
| ASTM D 6158 : 2016-02 | SPECIFICATION FOR MINERAL HYDRAULIC OILS |
| ASTM D 5222 : 2016 : REDLINE | Standard Specification for High Fire-Point Mineral Electrical Insulating Oils |
| API 1525A : 1ED 2012 | BULK ENGINE OIL CHAIN OF CUSTODY AND QUALITY DOCUMENTATION |
| SAE J 2359 : 1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE |
| SAE J 357 : 2016 | PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.