ASTM D 5948 : 2005 : R2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Molding Compounds, Thermosetting
Hardcopy , PDF
04-12-2020
English
06-11-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 08.03, 2015 Describes the basic properties of thermo-set molding compounds and the test methods used to establish the properties.
| Committee |
D 20
|
| DevelopmentNote |
Supersedes ASTM PS 15 (12/2001) Supersedes MIL M 14/8 (07/2004)
|
| DocumentType |
Standard
|
| Pages |
20
|
| ProductNote |
Reconfirmed 2012
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the basic properties of thermoset molding compounds and the test methods used to establish the properties.
1.2Classification—Molding thermosetting plastic compounds shall be of the following resins and are covered by the individual specification sheets (see 5.1 and Annex A1-Annex A8).
1.3Order of Precedence—In the event of a conflict between the text of this specification and the references cited in Section 2 (except for related specification sheets), the text of this specification takes precedence. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
| ASTM D 1896 : 1999 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 4350 : 2016 : REDLINE | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 4350 : 2013 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 3636 : 2000 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3638 : 2012 : REDLINE | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 3419 : 1993 | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM E 1224 : 1994 | Standard Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes (Withdrawn 2002) |
| ASTM E 994 : 1995 | Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004) |
| ASTM D 3636 : 2013 : REV A : EDT 1 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3638 : 2007 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 1896 : 1999 : R2004 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 3636 : 2006 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 4350 : 2000 : R2005 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 3638 : 2012 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3636 : 2013 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 4697 : 1995 : R2001 | Standard Guide for Maintaining Test Methods in the User's Laboratory (Withdrawn 2009) |
| ASTM D 4350 : 2000 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 3419 : 2000 : R2006 | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM D 3419 : 2012 : R2019 | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 3638 : 1993 : R1998 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 4350 : 2016 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 3419 : 2012 | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D 3636 : 2013 : REV A | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3419 : 2000 | Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
| ASTM D 3636 : 2011 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| ASTM D 4350 : 2015 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 1896 : 2009 | Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
| ASTM D 4697 : 1995 | Standard Guide for Maintaining Test Methods in the User's Laboratory |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.